reCool ® Made in Made in Switzerland Switzerland Swiss Precision Tools reCool© Rotatory (RCR) REGO-FIX’s reCool is a one-of-a-kind solution that converts existing tooling systems to utilize coolantthrough tooling. • For tools with metric male thread with ER collet • Speeds up to 12,000 rpm* • Coolant pressures up to 1,000 PSI • Coolant lubricated maintenance free bearings • For through cutter coolant (with sealing disc DS) • For peripheral coolant (with flush disc KS) • Converts existing tooling to coolant through Peripheral Cooling Without reCool • Adjustment of the nozzles or spray tubes, with different tool length and tool diameter limited • Coolant is not directly at the cutting edge and thus • • higher wear and tear on the tool Scattering losses of the spray jet Poorer chip removal Type Part No. Standard reCool Set includes: Wrench Rotary reCool Sets: Internal Cooling With reCool • Optimum coolant coverage for all tools • No scattering or spray losses • Tool lubricant is optimized via through tool flow • Increased chip removal Number Qty Description RCR/ER 16 3716.00000 7117.16000 1 1 reCool Clamping Nut RCR/ER 20 3720.00000 7117.20000 2 1 Coolant hose with protective cover RCR/ER 25 3725.00000 7117.25000 3 2 1/8“ BSP Fitting RCR/ER 32 3732.00000 7117.32000 4 2 1/8“ BSP elbow fitting RCR/ER 40 3740.00000 7117.40000 www.REGO-FIX.com 800-999-7346 reCool© Static (RCS) For Swiss Automatic machines • Designed to replace standard ER mini-nuts type ER 16 & ER 20 • No longer requires access to the back of the tools to induce coolant with fittings • No more coolant fittings on the front of holders • • • • • reducing working area Coolant pressures up to 1,450 PSI with standard hose and 2,100 psi with braided hose For through coolant drills (with sealing disc DS) For peripheral coolant (with flush disc KS) Converts existing tooling to coolant through Uses new anti-slip nut design profile ER/MX Peripheral Cooling Without reCool Internal Cooling With reCool Static reCool Sets: Part No Description 3716.50000 SET RCS / ERMX 16 Set reCool® static coolant supply system 3720.50000 SET RCS / ERMX 20 Set reCool® static coolant supply system 3799.95000 SET RHS-100 coolant pipe with protector Ø 6 mm, 400 mm length 3799.96180 SET RVG-100 1/8” - 0° 1/8" BSP straight push-in fitting (2 pcs. up to 100 bar) 3799.96189 SET RVA-100 1/8” - 90° 1/8" BSP elbow push-in fitting (2 pcs. up to 100 bar) 3799.97100 RHS-HP L100 Braided steel hose to 150 bar length 100 mm 3799.97200 RHS-HP L200 Braided steel hose to 150 bar length 200 mm 3799.97300 RHS-HP L300 Braided steel hose to 150 bar length 300 mm 3799.97400 RHS-HP L400 Braided steel hose to 150 bar length 400 mm reCool RCS & RCR suitable for use with REGO-FIX coolant disc systems DS/ER and KS/ER DS/ER System KS/ER System * Please see REGO-FIX ER System catalog for coolant disk, collets and matching wrenches www.REGO-FIX.com 800-999-7346 Swiss Automatic Tooling Made in Made in Switzerland Switzerland Other Products & Accessories Made in Switzerland Product Highlights 2014 Made in Switzerland Swiss Precision Tools REGO-FIX TOOL CORPORATION 7752 Moller Road Indianapolis, IN 46268 USA Toll Free: 800.999.7346 Phone: 317.870.5959 Fax: 317.870.5955 Email: [email protected] www.rego-fix.com ©2014 REGO-FIX Tool Corp. All rights reserved. COL1124.1 09/2014