H-‐Series Tooling Catalog H-‐51 BMT 55 H
H-‐Series Tooling Catalog H-‐51 BMT 55 H-‐Series Lathes with BMT Tooling System BMT 51 Tooling Note: All BMT Tooling can be utilized on either the Main or Second Spindle on any station. Tooling Catalog # C-‐1501 2 H51 Top Plate Layout and Swing Over Way Covers Tooling Catalog # C-‐1501 3 FG 0011944SQD 1” Double Square Shank Static Tool Holder with External Coolant Tooling Catalog # C-‐1501 4 FG 0011944SQ 1”Single Square Shank Static Tool Holder with External Coolant Tooling Catalog # C-‐1501 5 FG 0011944RL 1.5” Round Shank Static Tool Holder with Internal or External Coolant Note: Toolholder is NOT a through hole style Tooling Catalog # C-‐1501 6 FG 0011944RQ 3/4” Quad Round Shank Holder with Internal/External Coolant Tooling Catalog # C-‐1501 7 FG 0011944CO Adjustable Cutoff Static Tool Holder with External Coolant Note: Cutoff blade is not included – uses standard 26mm blade Tooling Catalog # C-‐1501 8 FG 0011944RDN 1” Double Narrow Round Shank Holder Through Holes Tooling Catalog # C-‐1501 9 FG 0011944RDH 1” AND 1-‐1/2” Double Half Index Holder with Internal\External Coolant Note: Half station index tool holders are NOT interchangeable between the H and T Series Machines due to a difference in the across flat distance of the top plate. Tooling Catalog # C-‐1501 10 FG 0011944SQDH 1” Double Half Index Square Shank with External Coolant Note: Half station index tool holders are NOT interchangeable between the H and T Series Machines due to a difference in the across flat distance of the top plate. Tooling Catalog # C-‐1501 11 FG 0011944SYR 1” Single Round Shank Through Hole with Internal\External Coolant Tooling Catalog # C-‐1501 12 No Actual Print at Time of Publishing FG 0011944SYRD 3/4” Double Round Shank with Internal\External Coolant Tooling Catalog # C-‐1501 13 FG 0011944TP 1” 90 ° Square Shank with External Coolant Tooling Catalog # C-‐1501 14 End Working Live Tooling Attachments FG 0000144EW End Working Live Tool 90 Degree, ER25 External Coolant Ratio 1:1 8000 RPM FG 0000144EWI End Working Live Tool 90 Degree, ER25 Internal Coolant Ratio 1:1 8000 RPM Note: Internal coolant units cannot be run dry Tooling Catalog # C-‐1501 15 Cross Working Live Tooling Attachments FG 0000144CW Cross Working Live Tool ER25 External Coolant 1:1 Ratio 8000 RPM FG 0000144CWI Cross Working Live Tool ER25 Internal Coolant 1:1 Ratio 8000 Note: Internal coolant units cannot be run dry Tooling Catalog # C-‐1501 16 Double End Working Live Tooling Attachments CQ 0000144EWD Double End Working Live Tool 90 Degree ER25 Double Collet External Coolant, 8000 RPM Tooling Catalog # C-‐1501 17 Angular Working Live Tooling Attachments FG 0000144AA Angle Adjustable Live Tool 90 Degree ER20 External Coolant 1:1 Ratio, 8000 RPM FG 0000144AAI Angle Adjustable Live Tool 90 Degree ER 20 Internal/External Coolant, 8000 RPM Note: Internal coolant units cannot be run dry. Tooling Catalog # C-‐1501 18 79977225007500 ER25 Collet Bushing holder. To be used with the CQ0011944SER holder. Bushing and Sleeves Tooling Catalog # C-‐1501 19 Hardinge Inc. One Hardinge Dr. Elmira, NY 14902 p. 800-‐843-‐8801 [email protected] www.hardinge.com www.shophardinge.com All specifications subject to change without notice. TM All marks indicated by ® and are trademarks of the respective owners. Tooling Catalog # C-‐1501 20
© Copyright 2024