1. business and industrial
2. construction

VÖGELE Screeds
Range of Products
A Successful Brand for a Job Well Done –
Time and Again!
VÖGELE Screeds
Because Building Roads Requires Accuracy
Modern road construction makes higher and higher demands on an asphalt paver’s performance and
cost-effectiveness. The screeds offered by VÖGELE feature powerful systems for compaction as well as
intelligent control and monitoring. A variety of optional extras is available. In other words, these screeds
come with all it takes to build roads efficiently and to the highest standards of quality.
2
3
VÖGELE Screeds
Their Range of Applications
The screed options offered by VÖGELE cover a wide
range of most varied applications. VÖGELE Extending
Screeds and Fixed-Width Screeds are capable of paving
widths from 0.5m to 16m. Besides asphalt, they handle a
variety of other materials such as concrete, crushed stone
or special mixes.
Whether your job to be done is surfacing footpath or
cycle path, sealing dumping ground or building highway
or motorway – or whether the challenge is racing circuits
or airport projects which both call for highest precision –
the range of VÖGELE screeds covers any kind of task
contractors may encounter.
4
Pavement repairs after backfilling trench
Building roundabout
Joint-free paving in large width
Paving asphalt seal on dumping ground with VÖGELE
High Compaction Technology
High precision paving on racing circuit
Inner-city application
Laying special mix
Placing base for sett paving
Application in sports stadium
Building farm track or driveway
Placing PCC® (Paver Compacted Concrete)
Surfacing footpath or cycle path
5
VÖGELE Extending Screeds
The System Behind Variable Widths
VÖGELE Extending Screeds are ideal for any kind of
application requiring adaptability. Whether your task is
paving in varying widths or work to be carried out in
confined spaces – VÖGELE Extending Screeds adapt to job
site conditions and requirements with effortless ease and
high precision. In whatever widths they pave, these screeds
produce pavements with maximum accuracy of levels.
Hydraulic Ram for Screed Width Control
Sliding Restraint System
Single-Tube
Telescoping System
The range of VÖGELE Extending Screeds covers an
enormous field of applications as it handles widths from
0.5m to 9.5m and offers screed versions for both standard
and high compaction. To suit the various types of tractor
units,VÖGELE Extending Screeds are available in a number
of versions as far as equipment with compacting systems
is concerned. Even the smallest screed, VÖGELE AB 200,
comes in two configurations: in V version for combination
with SUPER 600 and in TV version going with SUPER 800.
The AB 340 Extending Screed for the compact pavers
in the SUPER 1100 and SUPER 1300 classes is offered in
V and TV versions. And the two top of the range models
AB 500-2 and AB 600-2 are available in TV, TP1 or TP2
versions.
Tamper
with Heating Rod
Pressure Bars
with Heating Rods
Screed Plate
with Heating Element
Screed Body
Screed’s Hydraulically
Extending Unit
6
7
AB 200
Extending Screed
Screed Versions
V, TV
Maximum Pave Width
3.2m
The AB 200 Extending Screed designed for the mini and small VÖGELE pavers stands out through accurate operation
and achieves high precompaction. It is available in 2 versions as far as equipment with compacting systems is concerned:
AB 200 V (with vibrators) has been specially designed for use with SUPER 600, AB 200 TV (with tamper and vibrators)
combines with SUPER 800.
The AB 200 Extending Screed, in either version, has a basic width of 1.1m and extends hydraulically to 2m. By addition of
bolt-on extensions, AB 200 V builds up to a maximum width of 2.7m. AB 200 TV features a maximum width of even 3.2m.
AB 340
Extending Screed
Basic Width
Infinitely Variable Range
Larger Widths
Set of Bolt-on Extensions
Reduction in Width
Infinitely Variable Range
Crown Adjustment
Mechanical
Key:
8
0.5m to 2.7m (AB 200 V)
0.5m to 3.2m (AB 200 TV)
1.1m
1.1m to 2m
35cm (AB 200 V/TV), maximum width 2.7m
60cm (AB 200 TV), maximum width 3.2m
0.5m to 1m
- 2% to + 4%
T = equipped with Tamper
V = equipped with Vibrators
Compacting Systems
Screed Versions
Tamper (T)
Vibrators (V)
Screed Heating
Dimensions and Weights
(Basic Screed)
Width
Depth
Weights
Maximum Pave Width
4.5m
The AB 340 Extending Screed is the perfect match for the compact pavers in the SUPER 1100 and SUPER 1300 classes.
With a basic width of 1.8m, an infinitely variable range from 1.8m to 3.4m and a maximum pave width of 4.5m,
the screed is ideal for combined footpath and cycle path or farm track applications as well as for surfacing minor roadways.
AB 340 is available in V version (with vibrators) and in TV Version (with tamper and vibrators). In either version,
compacting systems are installed across the full screed width, including bolt-on extensions.
A typical VÖGELE feature found in the AB 340 Extending Screed, like in all VÖGELE screeds, is electric heating.
The modern, powerful screed heating system provides for quick and uniform heating to operating temperature,
an essential for smooth surface texture.
Specification AB 200
Pave Widths
Screed Versions
V, TV
Specification AB 340
Pave Widths
V, TV
tamper speed up to 1,800 rpm
tamper stroke 4mm
eccentric vibrators, frequency up to 50 Hz
screed plates and tamper bars heated electrically
by heating rods
1.1m (no end plates fitted)
0.7m
600 kg (AB 200 V)
720 kg (AB 200 TV)
Basic Width
Infinitely Variable Range
Larger Widths
Set of Bolt-on Extensions
Reduction in Width
Set of Cut-Off Shoes
Crown Adjustment
Mechanical
Key:
Technical alterations reserved.
0.75m to 4.2m (AB 340 V/TV)
0.75m to 4.5m (AB 340 TV)
1.8m
3.4m
40cm (for AB 340 V/TV), maximum width 4.2m
55cm (for AB 340 TV), maximum width 4.5m
52.5cm
- 2.5% to + 4.5%
M, W or parabolic profiles possible
T = equipped with Tamper
V = equipped with Vibrators
Compacting Systems
Screed Versions
Tamper (T)
Vibrators (V)
Screed Heating
Dimensions and Weights
(Basic Screed)
Width
Depth
Weights
V, TV
tamper speed up to 1,700 rpm
tamper stroke 4mm
eccentric vibrators, frequency up to 50 Hz
screed plates and tamper bars heated electrically
by heating rods
1.8m
1.1m
1.3 t (AB 340 V)
1.4 t (AB 340 TV)
Technical alterations reserved.
9
AB 500-2
Extending Screed
Screed Versions
TV, TP1, TP2
Maximum Pave Width
8.5m
AB 600-2
Extending Screed
Screed Versions
TV, TP1, TP2
Maximum Pave Width
9.5m
The AB 500-2 Extending Screed combines with all VÖGELE tractor units featuring a basic width of 2.5m. Thanks to its
unique single-tube telescoping system for infinite variation of pave width, it is ideal for a wide field of applications.
The screed extends hydraulically from 2.55m to 5m and builds up with bolt-on extensions to a maximum width of 8.5m.
Addition of cut-off shoes allows to reduce pave width to a minimum of 2m.
The AB 600-2 Extending Screed has a basic width of 3m. Equipped with the VÖGELE single-tube telescoping system,
its pave width is infinitely variable up to 6m. By addition of bolt-on extension, the screed builds up for joint-free paving to
a maximum of 9.5m. This makes AB 600-2 ideally suited for combination with VÖGELE pavers in the upper mid range and
also with SUPER 2500. For minor jobs, cut-off shoes are available allowing to reduce the pave width to a minimum of 2.45m.
The AB 500-2 is available with tamper and vibrators as well as in two versions for high compaction (with tamper
and 1 or 2 pressure bars).
AB 600-2 is offered in three different versions for compaction. It comes in TV version (with tamper and vibrators)
or in TP1 or TP2 versions for high compaction (with 1 or 2 pressure bars).
Specification AB 500-2
Specification AB 600-2
Pave Widths
Basic Width
Infinitely Variable Range
Larger Widths
Set of Bolt-on Extensions
2m to 8.5m (dependent on type of tractor unit)
2.55m
2.55m to 5m
Vibrators (V)
Pressure Bar(s) (P)
25cm
75cm
125cm
Screed Heating
Reduction in Width
Set of Cut-Off Shoes
27.5cm
Crown Adjustment
Mechanical / Hydraulic (Option) - 2.5% to + 5% (dependent on type of tractor unit)
M, W or parabolic profiles possible
Compacting Systems
Screed Versions
TV, TP1, TP2
Tamper (T)
tamper speed up to 1,800 rpm
tamper stroke adjustable (TP1/TP2)
to 2mm, 4mm, 7mm
Key:
10
T = equipped with Tamper
V = equipped with Vibrators
P1 = equipped with 1 Pressure Bar
P2 = equipped with 2 Pressure Bars
Dimensions and Weights
(Basic Screed)
Width
Depth
Weights
eccentric vibrators, frequency up to 50 Hz
driven by pulsed-flow hydraulics
impulse recurrence frequency 68 Hz
hydraulic oil pressure up to 120 bar
screed plates, tamper bars and pressure bar(s)
heated electrically by heating rods
2.55m
1.24m (AB 500-2 TV)
1.37m (AB 500-2 TP1/TP2)
3.2 t (AB 500-2 TV)
3.45 t (AB 500-2 TP1)
3.8 t (AB 500-2 TP2)
Pave Widths
Basic Width
Infinitely Variable Range
Larger Widths
Set of Bolt-on Extensions
Vibrators (V)
Pressure Bar(s) (P)
25cm
75cm
125cm
Screed Heating
Reduction in Width
Set of Cut-Off Shoes
27.5cm
Crown Adjustment
Mechanical / Hydraulic (Option) - 2.5% to + 5% (dependent on type of tractor unit)
M, W or parabolic profiles possible
Compacting Systems
Screed Versions
TV, TP1, TP2
Tamper (T)
tamper speed up to 1,800 rpm
tamper stroke adjustable (TP1/TP2)
to 2mm, 4mm, 7mm
Key:
Technical alterations reserved.
2.45m to 9.5m (dependent on type of tractor unit)
3m
3m to 6m
T = equipped with Tamper
V = equipped with Vibrators
P1 = equipped with 1 Pressure Bar
P2 = equipped with 2 Pressure Bars
Dimensions and Weights
(Basic Screed)
Width
Depth
Weights
eccentric vibrators, frequency up to 50 Hz
driven by pulsed-flow hydraulics
impulse recurrence frequency 68 Hz
hydraulic oil pressure up to 120 bar
screed plates, tamper bars and pressure bar(s)
heated electrically by heating rods
3m
1.24m (AB 600-2 TV)
1.37m (AB 600-2 TP1/TP2)
3.65 t (AB 600-2 TV)
3.95 t (AB 600-2 TP1)
4.3 t (AB 600-2 TP2)
Technical alterations reserved.
11
VÖGELE Fixed-Width Screeds
Large Widths, High Performance
VÖGELE Fixed-Width Screeds reveal their strong points
on all projects where large pave widths are required.
Whether your task is motorway construction in full-road
width up to 16m, absolutely true to line and level, or high
compaction of most varied construction materials – these
screeds always do an excellent job.
Basic Screed
VÖGELE Fixed Screeds are of modular design and
build up easily to large widths. Not only are fixed bolt-on
extensions available, but also hydraulically extending
ones allowing convenient paving in varying widths within
the specified range.
Bolt-on Extension
For SB 250 und SB 300 Fixed-Width Screeds,
High Compaction Technology is also offered. Screeds are
available in TP1, TP2 or TVP2 versions.
Tamper
with Heating Rod
Eccentric Vibrators
Screed Plate
with Heating Element
Pressure Bars
with Heating Rods
Hydraulic bolt-on extensions allow infinite variation of pave width also for Fixed-Width Screeds.
12
13
SB 250
Fixed-Width Screed
Screed Versions
TV, TP1, TP2, TVP2
Maximum Pave Width
13m
SB 300
Fixed-Width Screed
Screed Versions
TV, TP1, TP2, TVP2
Maximum Pave Width
16m
The SB 250 Fixed-Width Screed combines with a variety of VÖGELE tractor units. This screed allows tractor units with
a basic width of 2.5m to make use of the advantages offered by VÖGELE Fixed-Width Screed Technology – high
compacting performance at large pave widths. SB 250 has a basic width of 2.5m and builds up with both fixed and
hydraulic bolt-on extensions to a maximum width of 13m.
The SB 300 Fixed-Width Screed for SUPER 2500 covers a wide range of applications from a basic width of 3m up to
a maximum width of 16m. SB 300 is thus perfectly suited to joint-free pavement construction for any kind of road
through to motorway. In other words, it is ideal for large-scale contracts. SB 300 builds up with both fixed and hydraulic
bolt-on extensions.
Specification SB 250
Specification SB 300
Pave Widths
Basic Width
Larger Widths
Set of Bolt-on Extensions (Fixed)
1.5m to 13m (dependent on type of tractor unit)
2.5m
25cm
50cm
100cm
150cm
Set of Bolt-on Extensions (Hydraulic) 75cm
Reduction in Width
Set of Cut-Off Shoes
25cm
50cm
Crown Adjustment
Mechanical
- 2% to + 3%
Compacting Systems
Screed Versions
TV, TP1, TP2, TVP2
Key:
14
T = equipped with Tamper
V = equipped with Vibrators
P1 = equipped with 1 Pressure Bar
P2 = equipped with 2 Pressure Bars
Tamper (T)
tamper speed up to 1,750 rpm
tamper stroke adjustable to 2mm, 4mm, 7mm
Vibrators (V)
eccentric vibrators, frequency up to 60 Hz
Pressure Bar(s) (P)
driven by pulsed-flow hydraulics
impulse recurrence frequency 68 Hz
hydraulic oil pressure up to 120 bar
Screed Heating
screed plates, tamper bars and pressure bar(s)
heated electrically by heating rods
Dimensions and Weights (Basic Screed)
Width
2.5m
Depth
1.14m
Weights
1.65 t (SB 250 TV)
1.88 t (SB 250 TP1)
2.02 t (SB 250 TP2)
2.1 t (SB 250 TVP2)
Pave Widths
Basic Width
Larger Widths
Set of Bolt-on Extensions (Fixed)
25cm
50cm
100cm
150cm
Set of Bolt-on Extensions (Hydraulic) 75cm
Reduction in Width
Set of Cut-Off Shoes
25cm
50cm
Crown Adjustment
Mechanical
- 2% to + 3%
Compacting Systems
Screed Versions
TV, TP1, TP2, TVP2
Key:
Technical alterations reserved.
2m to 16m
3m
T = equipped with Tamper
V = equipped with Vibrators
P1 = equipped with 1 Pressure Bar
P2 = equipped with 2 Pressure Bars
Tamper (T)
tamper speed up to 1,750 rpm
tamper stroke adjustable to 2mm, 4mm, 7mm
Vibrators (V)
eccentric vibrators, frequency up to 60 Hz
Pressure Bar(s) (P)
driven by pulsed-flow hydraulics
impulse recurrence frequency 68 Hz
hydraulic oil pressure up to 120 bar
Screed Heating
screed plates, tamper bars and pressure bar(s)
heated electrically by heating rods
Dimensions and Weights (Basic Screed)
Width
3m
Depth
1.14m
Weights
2 t (SB 300 TV)
2.26 t (SB 300 TP1)
2.41 t (SB 300 TP2)
2.5 t (SB 300 TVP2)
Technical alterations reserved.
15
Hydraulic Bolt-on Extensions
For SB 250 / SB 300 Fixed-Width Screeds
Screed Versions
T, TP1, TP2
Infinitely Variable Range
up to 1.5m
Fixed Screeds are ideal for paving in larger widths. Their fields of applications are enhanced by VÖGELE Hydraulic
Bolt-on Extensions which offer the advantage of infinitely variable pave width within the range of 1.5m. And Hydraulic
Bolt-on extensions save time. In order to change screed width within the above range, there is no need to mount or
demount conventional bolt-on extensions as it used to be.
Hydraulic Bolt-on Extensions are based on the technology of the well-proven VÖGELE Extending Screeds. Units are
available in T version (with tamper), TP1 version (with tamper and 1 pressure bar) or TP2 version (with tamper and
2 pressure bars). They can be fitted to mechanical bolt-on extensions of 1m or 1.5m. For mounting Hydraulic Bolt-on
Extensions, the screed needs to be enlarged in width through mechanical extensions by at least 1.5m, both left and
right sides.
SB 250 B
Concrete Screed
Infinitely Variable Range
Compacting Systems
Versions
Tamper (T)
Pressure Bar(s) (P)
Key:
16
T = equipped with Tamper
1 set of hydraulic bolt-on extensions
(left and right sides)
75cm each side
T, TP1, TP2
tamper speed up to 1,750 rpm
tamper stroke adjustable to 2mm, 4mm, 7mm
driven by pulsed-flow hydraulics
impulse recurrence frequency 68 Hz
hydraulic oil pressure up to 120 bar
P1 = equipped with 1 Pressure Bar
P2 = equipped with 2 Pressure Bars
Screed Heating
Mounting
Weigths (1 Set)
Version T
Version TP1
Version TP2
Maximum Pave Width
7.5m*
The SB 250 B Concrete Screed makes economical construction of concrete pavements an easy job. The screed
handling a maximum pave width of 7.5m and layer thickness up to 30cm is ideally suited to PCC® paving, for instance,
on storage areas for containers, industrial yards, roads on factory grounds, industrial floors etc. For concrete paving,
high compaction is a crucial issue. This is why the SB 250 B Concrete Screed comes with the full package of compacting
systems. Equipped with tamper, vibrators and 2 pressure bars this special HPC screed in TVP2 version yields a final
density of up to 98%. And what is more: screeds swap easily, thus allowing the paver to be quickly ready for operation
whether on a job for asphalt or concrete paving. Downtime is minimized and the paver’s utilization enhanced considerably.
Specification: Hydraulic Bolt-on Extensions
Scope of Supplies
Screed Version
TVP2
Specification SB 250 B Concrete Screed
screed plates, tamper bars and pressure bar(s)
heated electrically by heating rods
to be mounted to 1m or 1.5m fixed bolt-on
extensions
basic screed needs to be enlarged in width
by at least 1.5m, left and right sides
Pave Widths
Basic Width
Larger Widths
Set of Bolt-on Extensions
1.55 t
1.7 t
1.8 t
Crown Adjustment
Mechanical
Compacting Systems
Screed Version
Key:
Technical alterations reserved.
2.5m to 7.5m (with SUPER 1900-2*)
2.5m
Tamper (T)
Vibrators (V)
Pressure Bars (P)
25cm
50cm
100cm
150cm
- 2% to + 3%
Dimensions and Weights
(Basic Screed)
Width
Depth
tamper speed up to 1,750 rpm
tamper stroke adjustable to 7mm, 9mm, 10mm
eccentric vibrators, frequency up to 60 Hz
driven by pulsed-flow hydraulics
impulse recurrence frequency 68 Hz
hydraulic oil pressure up to 120 bar
2.5m
1.14m
TVP2
T = equipped with Tamper
V = equipped with Vibrators
P2 = equipped with 2 Pressure Bars
Use of the SB 250 B Concrete Screed belongs to the field of special applications.
Clients interested in this screed are requested to contact the VÖGELE Applications Technology Service.
*Other pave widths or tractor units upon request.
Technical alterations reserved.
17
VÖGELE Screed Technology
High-Power Compaction (HPC)
VÖGELE High Compaction Technology Achieves Highest Density
The Facts: VÖGELE High Compaction Technology
VÖGELE set standards in terms of compaction: perfected technology together with the ultimate in materials for
manufacture of screed components guarantee the outstanding performance and reliability VÖGELE high compaction
systems are known for. The tamper provides for optimum precompaction of the mix. Tamper speed and stroke length
can be set up and adjusted precisely to match flow of mix, kind of mix and layer thickness.
High compaction is crucial when it comes to perfectly build up a pavement in layers, true to line and level. For each
compacting system, separate adjustment and control is provided. The pressure for pressure bars is infinitely variable.
Thanks to this feature, VÖGELE High Compaction Technology can be applied on jobs where layer thickness varies
across the pave width, for most varied paving materials and even for paving wearing course.
The pressure bar(s) driven by pulsed-flow hydraulics are the core of VÖGELE High Compaction Technology. Thanks to
this unique technology, VÖGELE pavers combined with HPC screeds in TP1, TP2 or TVP2 versions achieve highest
degrees of density.
The pressure bars P1 and P2 are located in the rear area
of VÖGELE HPC screeds. In this location, the highest
possible compacting intensity is achieved, as the mix
is prevented from yielding to the front. Nor can it yield
to the sides where it is confined by the screed’s end
plates.
High compaction systems can be switched off, which
allows the screed to be used for standard compaction
at any time.
AB 500-2 Extending Screed in TP2 version with 2 pressure bars.
The pressure bars located at the rear of the screed achieve maximum compaction
as the mix is prevented from yielding.
The pulse generator transforms a constant hydraulic pressure into high-frequency
pressure pulses.
How pulsed-flow hydraulics work: due to the high impulse recurrence frequency, pressure bars
are in permanent contact with the mix. The pressure for pressure bars is infinitely variable.
18
The element at the beginning of the process of VÖGELE
High Compaction is the pulse generator as part of the
pulsed flow hydraulics. It generates high-frequency
pressure pulses. The pressure bars, in contrast to the
beating tamper bar, remain in permanent contact with
the mix, thus forcing the mix down for a prolonged
period of time.
Thanks to the high density achieved by the pressure
bars, fewer passes are required for subsequent
compaction by rolling.
Even when layer thickness varies across the pave width, VÖGELE High Compaction Technology achieves a high degree of uniform density.
19
VÖGELE Screed Technology
Screed Heating
Electric Screed Heating
Through decades, VÖGELE have gained a wealth of experience in electric screed heating, which has been installed in
all VÖGELE Fixed-Width and Extending Screeds since 1952. Electric heating provided for all compacting and smoothing
screed elements heats them up and maintains an ideal temperature while paving. In all VÖGELE tractor units, powerful and
sturdy three-phase A.C. generators are installed supplying electric power for screed heating. An intelligent Generator
Management brings highest efficiency.
In order to support compaction and produce a smooth surface texture, all compacting elements are heated across the
full screed width.
Screed plates are fitted as standard with heating elements distributing the heat all over the plates. Heating elements
are perfectly insulated to prevent loss of heat to the upper environment. As a result, the heat is directed 100% to where
it is needed, in fact to areas of contact with the hot mix. Tamper bar and pressure bars are fitted with heating rods for
quick and uniform heating from inside. Sophisticated technology is installed allowing automated control of screed heating.
Generator Management
An intelligent Generator Management system ensures that, irrespective of engine rpm, the generator output needed
for heating the screed in its current pave width is made available at all times. Heating the screed’s compacting systems
to operating temperature takes a short time only even with the engine running at minimum rpm. When paving with
paver functions set to automatic, the Generator Management activates screed heating in Alternating Mode which cuts
electric power required for heating and reduces fuel consumption.
A three-phase A.C. generator, easily accessible, is installed to supply power for perfect heating of VÖGELE Extending Screeds and Fixed-Width Screeds across the full pave width.
The benefits of VÖGELE Generator Management at a glance:
Alternating Mode cuts electric power required for screed heating
and reduces fuel consumption.
Screed heating even at minimum engine rpm takes a short time only,
so that the paver is quickly ready for operation.
Uniform and constant screed heating adds to high pavement quality.
Infrared image of a screed plate. Constant and uniform heating all over the screed
plate is crucial for high pavement quality.
20
All compacting elements are heated across the full pave width.
21
VÖGELE Screed Technology
Telescoping System for Extending Screeds
VÖGELE Single-Tube Telescoping System
The hydraulically extending units of VÖGELE screeds slide in and out smoothly on a single-tube telescoping system.
The three-section telescoping tube is amply dimensioned (150/170/190mm) and optimally stabilzed. Even with the
screed set to its maximum width, each tube section is extended by no more than half. Low-wear teflon tape inside the
telescoping tube provides for jerk-free sliding. For screed width control, two hydraulic rams are installed which can be
operated very precisely.
Telescoping Tube
3-Point Suspension
VÖGELE Extending Screeds place all kinds of layers with highest precision, also those varying in thickness across the
pave width when building crowned pavement profile, for instance.
Thanks to the 3-point suspension of the screed’s extending units, torsional forces exerted to these units by pressure of
the mix cannot affect the screed’s telescoping system. Forces are absorbed at the telescoping tube’s outer point of
attachment to the extending unit, by a fixed guide tube and a sliding restraint system. Thanks to this design, the screed’s
extending units move in and out smoothly, nothing can jam or get stuck.
The VÖGELE Single-Tube Telescoping System at a glance:
Hydraulic Ram
Guide Tube
Sliding Restraint System
Amply dimensioned, sturdy telescoping tubes featuring high-precision operation.
They provide for excellent stability of the screed, a condition of prime paving results.
The VÖGELE single-tube telescoping system guarantees maximum stability even when the screed is set to its maximum width.
Telescoping tubes are located in high positions. Any contact with hot mix is positively avoided.
Even with the screed set to its maximum width, telescoping tubes are extended by no more
than half, which provides for zero flexing.
3-Point Suspension
Thanks to 3-point suspension of the screed’s extending units, nothing can jam or get stuck.
Thanks to amply dimensioned telescoping tubes, the screed’s extending units slide in
and out with highest precision.
22
3-point suspension provides for smooth extension and retraction of the screed.
Nothing can jam or get stuck.
23
VÖGELE Screed Technology
Pavement Profiles
VÖGELE Screed Technology
Bevel Side Plates
Crown / Transverse Profiles
Bevel Side Plates
VÖGELE screeds are capable of building a wide spectrum
of transverse profile shapes. Amount of crown and
height of the screed’s extending units can be set up to a
variety of specifications – across the full pave width,
with bolt-on extensions included.
VÖGELE screeds build excellent pavements right up to
the edges. Bevel side plates available for Fixed-Width
Screeds and the AB 500-2 and AB 600-2 Extending Screeds
provide for perfect and solid edges along the sides
of a roadway, vertical or sloped. VÖGELE offer bevel side
plates for various angles and layer thicknesses. In order
to achieve an optimal surface finish, bevel side plates
can be fitted with heating rods.
VÖGELE Extending Screeds come with hydraulically
extending units which are separately adjustable in height,
independent of the screed’s basic unit. For this purpose
each extending unit is fitted with adjusting spindles on
either side. Spindles can be operated separately, which
allows the extending unit to be sloped above or below
horizontal. This way, the screed can be set up to any
transverse profile whatsoever imaginable in practice.
When combining the extending units‘ sloping above or
below horizontal with a crown of the screed’s basic unit,
VÖGELE Extending Screeds are capable of even handling
positive or negative gull wing profiles (M or W profiles).
Positive or Negative Crown
The use of bevel side plates is recommended above
all for HPC screeds. These screeds positively prevent the
mix from yielding to the front or to the sides under the
influence of the compacting forces. As a result, maximum
density is achieved right up to the pavement edges.
VÖGELE screeds with bevel side plates fitted produce a high uniform density
and perfect pavement edges in one go.
With the many different applications of extending screeds
in mind, VÖGELE provided bevel side plates with a
quick-fitting device. Fitting or changing these plates on
the job is a matter of just minutes.
Easy crown adjustment by spindles (mechanical or
electro-hydraulic).
Perfect edges, vertical or sloped.
Extending Unit Sloped Above Horizontal on One Side
Allows paving of positive crown up to +5% and
negative crown up to - 2.5%.
Optimal surface finish thanks to electric heating.
Bevel side plates, heated electrically, provide for a smooth surface.
Uniform degree of density across the full pave width.
The screed’s extending units are separately adjustable
in height, at insides and outsides.
Bevel side plates install quickly to extending screeds
thanks to quick-fitting device.
Crown adjustment plus variable height of the screed’s
extending units allow most varied shapes inluding
M and W profiles.
M or W Profile
24
25
VÖGELE Manufacturing Technology
Where Quality Begins
The screed is the heart of each road paver. From the engineering point of view, it is the crucial
component deciding whether the paving job will be a success or not. VÖGELE are committed to the
manufacture of prime quality screeds standing out through high reliability and the latest in screed
technology.
VÖGELE sceed plates made of highly wear resistant material undergo a 3-step manufacturing
process. Accurate milling of the plates‘ leading edges by special tools ensures that later on the mix
will be properly packed under the screed. In addition, it provides for smooth and accurate guidance
of the tamper bar, a feature that adds to long service lives of both screed plate and tamper.
First-class thermal treatment of tamper bar and pressure bars is crucial for high quality and longevity.
It is the process of hardening proper that decides upon these components‘ wear properties. VÖGELE
relies on induction hardening. This method provides for enhanced hardening depth, uniform hardening
over the bar’s full length and highest evenness – properties that reduce wear of tamper bar and pressure
bars and guarantee long service lives.
CNC machine welds threaded bolts to screed plates.
Accurate milling of the screed plate and the plate’s leading edge.
26
Screed plates straightened free from tension and with highest precision (error of no
more than 2 tenths of a millimetre allowed) feature longevity.
Induction hardening of tamper bar and pressure bars guarantees long service lives.
Tamper bar and pressure bars are hardened to a uniform depth of 5mm.
27
VÖGELE Manufacturing Technology
Where Quality Begins
Stability and high precision of the single-tube telescoping system installed in VÖGELE Extending
Screeds are of crucial importance for the paving results achieved later on in the field. It is above all
large screed widths that call for a high level of accuracy. Therefore, stability and zero slack are main
demands made on the telescoping systems in VÖGELE screeds. With honing machines we produce an
extremely smooth surface, allowing a roughness of no more than 5 thousandths of a millimetre.
This is 20 times less than the thickness of a human hair.
An important step in the manufacturing process is robotized welding of screed frames. With workpieces
in an optimal position, robot-produced welds are carried out with high precision, seam after seam.
As a result, screed frames manufactured this way feature consistent high quality and excellent sturdyness.
During all phases of their manufacture and during final assembly, our screeds undergo thorough
testing which guarantees that products made to highest standards of quality are supplied to clients –
products made by VÖGELE.
20 times less than the thickness of a human hair. Inner surfaces of telescoping tubes are machined to the highest possible level of precision.
Eccentric shafts for tamper drives.
28
Welding cell for screed frames. Robot-produced weld seams feature consistent,
high quality and precision.
Low-wear teflon tape for zero slack of the telescoping tubes.
During final assembly, VÖGELE screeds undergo a variety of functional tests.
29
VÖGELE Screeds
Bolt-on Extensions
For all VÖGELE screeds bolt-on extensions are available. The VÖGELE system of bolt-on extensions
allows to easily and sturdily build up screeds to any pave width desired. Even when paving in large
widths, VÖGELE screeds work with highest precision and achieve superb degrees of uniform density
right up to the pavement edges.
AB 200
AB 340
Bolt-on extensions are fitted with the same heating elements installed in the basic screed.
Your benefit: a consistent, high pavement quality across the full pave width.
AB 500-2
AB 600-2
1.225m
2.55m
5m
SB 250
1.225m
2 x 0.25m
Example: Screed built up to maximum pave width
5.5m
2 x 0.75m
6.5m
2 x 0.75m + 2 x 0.25m
SB 300
7m
2 x 1.25m
7.5m
4 x 0.75m
8m
4 x 0.75m + 2 x 0.25m
8.5m
30
Example: Screed built up to maximum pave width
31
VÖGELE Screeds
At a Glance
Maximum Pave Widths
Paver Type
SUPER
600
SUPER
800
SUPER
1100-2
SUPER
1103-2
4.2m
4.2m
SUPER
1300-2
SUPER
1303-2
SUPER
1600-2
SUPER
1603-2
SUPER
1800-2
SUPER
1803-2
SUPER
1900-2
SUPER
2100-2
AB 500-2
4.5m
4.2m
8m
7m
8.5m
8m
8.5m
8.5m
AB 600-2
8m
9m
8m
SUPER
2500
Screed Type
AB 200 V
2.7m
AB 200 TV
3.2m
AB 340 V
AB 340 TV
SB 250
10m
9.5m
9.5m
11m
13m
SB 300
9.5m
16m
Screed Versions for Compaction
Paver Type
SUPER
600
SUPER
1600-2
SUPER
1603-2
SUPER
1800-2
SUPER
1803-2
SUPER
1900-2
SUPER
2100-2
TV
x
x
x
x
x
x
TP1
x
x
x
x
x
x
TP2
x
x
x
x
TV
x
x
x
x
x
TP1
x
x
x
x
x
TP2
x
x
x
x
x
TV
x
x
x
TP1
x
x
x
TP2
x
x
x
x
x
Screed Type
Screed Version
AB 200
V
AB 340
V
SUPER
800
SB 250
x
x
SUPER
1300-2
SUPER
1303-2
x
x
TVP2
SB 300
Key:
SUPER
2500
x
TV
AB 600-2
SUPER
1103-2
x
TV
AB 500-2
SUPER
1100-2
x
TV
x
TP1
x
TP2
x
TVP2
x
T = equipped with Tamper
V = equipped with Vibrators
P1 = equipped with 1 Pressure Bar
P2 = equipped with 2 Pressure Bars
SB = Fixed-Width Screed
AB = Extending Screed
Special widths upon request.
Technical alterations reserved.
® InLine Pave, NIVELTRONIC, NAVITRONIC, RoadScan and V-TRONIC are registered Community Trademarks of JOSEPH VÖGELE AG, Mannheim. PCC is a registered German Trademark of JOSEPH VÖGELE AG, Mannheim.
JOSEPH VÖGELE AG
Neckarauer Straße 168-228
68146 Mannheim · Germany
[email protected]
B 1 0020 04 EN/04.07
Telephone: +49 (0)621 8105 0
Fax:
+49 (0)621 8105 461
www.voegele-ag.de