Facility Potable Water Treatment “Legionella Prevention Technology That Works”
Facility Potable Water Treatment “Legionella Prevention Technology That Works” USA, Canada, Europe, GCC and Asia Since 2002 AquaLyse® lowers the exposure risks associated to waterborne microorganisms such as Legionella pneumophila, cause of Legionnaires disease and/or Pontiac feaver. Improve facility compliance with international best practices by implementing the AquaLyse® “chemical free” medical, commercial or military grade copper silver ionisation technology in your facility’s incoming potable water supply lines and/or reservoirs. AquaLyse® ion generators help engineers comply with... • The control of Legionella bacteria in water systems, HSC approved Code of practice and Guidance L8 1 • Technical Memoranda TM13 Minimizing the risk of Legionnaires disease 2 • The Control of Legionellosis including Legionnaires' Disease Health and Safety Series Booklet 3 Facility Potable Water Treatment Technology Call Today! Tel: +1 (888) 988-4667 Fax: +1 (866) 420-2596 AquaLyse® water treatment technology is specifically engineered and manufactured for healthcare facilities, hotels, VA hospitals, condominiums, villas, resorts, government and commercial buildings, military and other large facilities with elaborate water distribution networks. With over 46 models to chose from, the AquaLyse® patented water treatment technology is the most sophisticated, reliable, robust and affordable facility potable water treatment technology on the market today. Anti-Legionella Code References: 1 London: Health and Safety Executive/The stationery Office 2 London Chartered Institution of Building Services Engineers (2002) 3 The Health and Safety Executive (HS(G)70).HSE.ISBN0118821504 Copper Silver Ionisation Tech Talk Copper Silver Ionisation Water Treatment Core Components: The Controller: AquaLyse® units include fully automated medical, commercial and military grade copper silver ionisation PLC generators. Automated variable power output levels are: (0-180 variable DC @ up to 160 amps) and number of chamber cells installed for each application is in direct correlation with the daily facility potable water usage and the type of application. The AquaLyse® PLC controller automatically adjusts the dissipation rate for each AquaLyse® Ionisation cell with monitored variable industrial power supplies. The flow of the copper and silver released into the water is called the ionic dissipation rate and will be calibrated by a certified AquaLyse® technician. Core Components: The Chamber Cells: Each AquaLyse® controller includes schedule 40 “seamless” stainless steel ionisation chamber cell(s). Within each AquaLyse® ionisation chamber cell you will find eight (8) copper silver alloy electrodes with a total weight of 10.5Kg (23 lbs.) per cell. The electrodes are composed of medical grade copper and silver alloy with concentration levels that vary from (70%/30% - Cu/Ag) to (90%/10% - Cu/Ag) depending on the technology application. AquaLyse Quick Facts ® • • • • Technology Basics: The automated controller monitors and delivers an electrical charge to the copper and silver alloy electrodes. The generation of ionic particles are dispersed into the potable water distribution network at concentration levels between Cu 0.4-0.8 PPM and Ag+ 0.02-0.06 PPM over the existing background values. The ionisation process will saturate the biofilm and bind to waterborne microorganisms. The biocide properties of copper silver ionisation systems is clinically proven to control and prevent Legionella growth within facility potable water distribution networks. Technology Sizing: Each AquaLyse® copper silver ionisation unit is chosen based on the calculated potable water usage for each facility. The location where the unit(s) will be utilized is also factored into the evaluation process. Other key questions will also determine which AquaLyse® unit perfectly fits your project objectives. • • • • Multi-Zone: AquaLyse® offers a unique solution that can treat each zone independently when multiple independent water treatment locations are within a common mechanical room. This will reduce a technology footprint by up to 80% and provide an engineering solution that can lower overall startup cost by up to 46%. AquaLyse® Warranty: As a world leader in water treatment technology, the AquaLyse® copper silver ionization systems come with a full ten (10) year limited warranty on the electronic control unit in combination with a full one (1) year limited warranty on the chamber cells and electrodes. If for any reason our system does not perform as expected, we will replace or fix the defective parts at no additional cost to you. AquaLyse® Guarantee: ProCare Water Treatment Inc. guarantees that our water treatment expertise and experience in combination with properly sized AquaLyse® industrial copper silver ionization systems will meet or surpass your expectations and deliver appropriate copper and silver concentration levels into your domestic potable (cold and/or hot) water system within 12 hours or we will take back the unit(s) and provide you with a full refund on the unit(s). Manufactured in Canada By: Procare Water Treatment Inc. 163 Valmont Cr. Dieppe NB Canada E1A 6J5 Will treat all of the facility potable water system including distal points with low water circulation. AquaLyse® ionisation chamber cells are classified as medical & military grade with stainless steel fire safety code compliance and sustained 800PSI+ pressure certified. AquaLyse® is excellent technology for both existing facilities and facilities under MEP planning. Fully penetrates the biofilm, site of microbiological growth to control Legionella and other microorganisms. AquaLyse® does not alter the water properties for safe water consumption. Meets WHO, EPA, HSE and many other drinking water standards. Up to 50% smaller footpring compared to other water treatment technologies. Water temperature does not hinder the functionality of AquaLyse®. AquaLyse® has very low maintenance requirements and operational cost. Installation Example AquaLyse (for 600 healthcare beds or 500 hotel rooms) BALL VALVE Flow FLOW RATE OF 180 GPM MAX FS AquaLyse FLOW SWITCH SIGNAL TO SMX-E4FM VDC OUT Out: 0-180 VDC @ 40 amps (10 amps per cell) (AA) (BB) (CC) (DD) AA) BB) CC) DD) SIDE STREAM (BY-PASS) Cell 1 Cell 2 Cell 3 Cell 4 Chamber 1 Chamber 2 200-240 VAC @ 45 amps (Source) 4-20mA, (Flow Meter Signal) Volt Free Status BMS Contact RJ45 / TCP/IP - Remote Acess & Monitoring BALL VALVE BALL VALVE Phone: 1-888-988-4667 Fax: 1-866-420-2596 Email: [email protected] "It's about Energy Savings, and Lowering Exposure Risks." © 2014 – All Right Reserved - ProCare Water Treatment Inc. Flow Flow DRAIN VALVE Chamber 3 Chamber 4
© Copyright 2024