Download Report

- EN_1 -
New and second hand machines
for the confectionery and
chocolate industry AgroP
Second-hand machinery list 2014-10
5) G11076
7) G11073
9) G11071
15) G11060
17) G11054
Lothar A. Wolf
Spezialmaschinen GmbH
1.
G11082
1
2.
S00007
1
3.
G11087
1
4.
G11077
1
5.
G11076
1
6.
G11074
1
7.
G11073
1
8.
G11072
1
9.
G11071
1
10. G11069
1
11. G11066
1
12. G11064
13. G11063
1
1
14. G11062
1
15. G11060
1
16. G11059
1
17. G11054
1
18. G11052
1
19. G11050
1
Max-Planck-Strasse 55 • 32107 Bad Salzuflen
Telefon: +49 (0) 52 22 / 98 47-0
Telefax: +49 (0) 52 22 / 98 47-22
eMail: [email protected]
Internet: http://www.wolf-machines.de
r
06.1 odMas
hM
0-1
o
hall
3 - b 0.10.20 skau
ooth
1
3G7 4
0
Foiling machines RASCH type RU for ro-tary products or
bottom fold, with protection device, one reel holder; some
machines are equipped with photocell. Output approx. 60 80 products/min. depending on the feeding velocity
Stainless steel tank for liquids, useful capacity approx.
50 to, single wall, with isolation and stirrer at the bottom.
Diameter approx. 3.200 mm , height approx. 7.200 mm.
Year of manufacture : 1985
Single shaft mixer HUBBES for dispersing agents with wall
scraper and dissolver shaft. The trouragh is mounted in a
on weighing cells. Useful capacity approx. 2.000 l.
stainless steel tank, approx. 700 l capacity, standing on
feet.
Fondant beater OTTO HÄNSEL type HFD-II. Capacity
approx. 250 up to 400 kg/h.
Mass pump SOLLICH type SSP-1000, mobile, with pump
sump. Output aprox. 1.000 kg/h.
Enrobing machine SOLLICH type TS-620 with curtain
trough, blower, shaking system and de-tailing shaft.
Working width: approx. 620 mm, year of manufacture 1977.
Mixing and beating machine PLOBERGER with two stirring
systems, useful capacity aprox. 2 x 20 l.
Double-Z kneader WERNER & PFLEIDERER type 12 with
jacketed trough 80 liter.
Rotary conche PETZHOLDT type KBS-600, approx. 600 kg
useful capacity.
Batch tempering machine BLUM type KT-500-L, used as
tank with stirrer, year of manufacture 1984
turntable BLUM, approx. 420 mm working width.
Enrobing machine BLUM type Cover-420, year of
manufacture 1984, working width: approx. 420 mm.
Worm-type tempering machines RASCH type TR-5 with an
output of approx. 500 kg/h.
Disc tempering machine SOLLICH type MST-1000-V for an
output of approx. 1000 kg/h, year of manufacture 1987.
Batch tempering machine WOLF type WT-20, capacity
approx. 20 kg, year of manufacture 2013
Deburring and dedusting system for pressed goods with
suction system CLEAN-BLAST type CB-1013, year of
manufacture 2009.
Roto-Compactor (recyclable materials press) KENBURN
type PS-8100-KSQ, year of manufacture 1998.
Filling weigher for cans JESMA made of stainless steel,
with corse and fine feed, up to approx. 15 kg
Geschäftsführer:
Michael Lothar Wolf
Amtsgericht Lemgo
Reg.-Nr. HRB 590
U.St.-Nr. DE 811 168 431
New and second hand machines for
the confectionery and chocolate industry
21) G11048
22) G11047
26) G10950
20. G11049
1
21. G11048
1
22. G11047
4
23. G11046
1
24. G11024
1
25. G10836
1
26. G10950
3
27. G10940
1
28. G10859
1
29. G10677
1
30. G10662
1
31. G10638
1
32
3
G10615
G10616
G10618
Shrink packing line MULTIPACK type 479 with shrink
tunnel type B-600, year of manufacture 2001.
Control scale TELTEK type 800, year of manufacture 2001,
working width approx. 210 mm.
Box erector SCHUBERT type SKA with glue boxes and
vacuum pump, year of manufacture 2001.
Tray-Packer SCHUBERT type SMB-2-filler to place
products in a tray, year of manufacture 2001.
belt coater SCHRÖTER type KB-72, approx. 800 mm wire
belt width.
Mogul line WINKLER & DÜNNEBIER type 361-B, year
of manufacture 1985, suitable for starch trays measuring
approx. 820 x 370 mm. Output: approx. 30 trays/min.
Wrapping machine GD type GD-2500 with volumetric plate
feeder, set up for Viennese fold.
Clips closing machine HARTMANN type 992/59-R, year
of manufacture 1999, for continuous processing. Output:
approx. 50 - 60 pces/min.
Laboratory disc tempering machine AASTED type AMK10 with storage tank, set up for water cooling, year of
manufacture 1996.
forming machine HAMAC HANSELLA type 85-A
(Superrobust), output approx. 37,5 - 74,5 m/min.
Decorating device SOLLICH type SDC-520-R, approx. 520
mm working width, year of manufacture 1998.
dosing differential weighers BRABENDER type DDW-MS6FW08/0-Plus-100, year of manufacture 2002.
dosing machines CARLE & MONTANARI type MLP-275
suitable for moulds measuring approx. 275 x 205 mm.
27) G10940
28) G10859
29) G10677
31) G10638
32) G10616
Kindly let us have your enquiries and offers of surplus machinery.
This list is based on our terms of sale and delivery. No liability will be assumed for any errors in description. The machines are subject to prior sale!
Best regards,
Lothar A. Wolf
Spezialmaschinen GmbH
Lothar A. Wolf
Spezialmaschinen GmbH
Max-Planck-Strasse 55 • 32107 Bad Salzuflen
Telefon: +49 (0) 52 22 / 98 47-0
Telefax: +49 (0) 52 22 / 98 47-22
eMail:[email protected]
Internet:http://www.wolf-machines.de
Geschäftsführer:
Michael Lothar Wolf
Amtsgericht Lemgo
Reg.-Nr. HRB 590
U.St.-Nr. DE 811 168 431