OBLIQUE GENERAL INFORMATION The Oblique is an affordable unit that is perfect for an expanding business with its 3PP interconnectable capabilities. SOCKETS OPTIONS Choose from 24 international power outlets available in black, grey and white. Optional colours are also available. Contact your closest distributor or www.powerlogic.net for more information. POWER OUTLET ORIENTATION All sockets are pre-fitted at angles in 15 degree increments. See reverse for details. SWITCHES The unit is able to house a 15A Thermal Overload Switch as well as other standard red and green switches depending on the client’s request MOUNTING OPTIONS The Oblique is usually a stand alone unit that can be screwed onto any surface through its mounting holes. There are also desk clamp options available (See reverse). BUILT-IN PROTECTION The Oblique adheres to international safety rules and regulations with its optional double insulation design. 55 204.7 221.6 35.8 41.1 PROTECTION Fused or Non-Fused option, Power Filters, Circuit breakers and earth leakage devices are also available on request. See small images below on the right-hand side: PERIPHERAL OPTIONS Cat 6 RCA USB Data HDMI POWER OPTIONS The unit has Hybrid Power capabilities (power & data) and is also able to house one or more circuits in a single unit. VGA Audio /Mic HDMI All measurements are in millimeters unless otherwise indicated © 2014 Copyright Powerlogic SA (Pty) Ltd. All Rights Reserved. Due to continual product improvements and upgrades, Power Logic reserves the right to amend and change products as it sees fit. As such, images of products are for indicative purposes only and actual products may vary from those depicted and certain options may be unavailable. Always check with your distributor or with Power Logic regarding availability of the product of your choice. UNIT OPTIONS The Oblique is a plastic, molded unit that is available as a 2-way (as illustrated here), 3-way or 4-way power outlet system. INTERCONNECTING Obliques are fitted with detachable cable(s) which connect to the unit with a 3PP connector allowing the unit to be chain linked making it perfect for office use. OBLIQUE INSTALLATION & OPERATION INSTALLATION MOUNTING OPTIONS Standard Desk Clamp Desk Thickness range: 10 mm - 50 mm Teeth WORK SURFACE WORK SURFACE Restricted Space Clamp Base (as seen on the left) Desk Thickness range: 10mm - 40 mm Bolt STEP 1 Loosen the bolt in an anti-clockwise direction until the clamp can move down with ease to enlarge the clamping capacity. STEP 2 Slide the clamp over the edge of the work surface and push the base up against the underside of the work surface. STEP 3 While holding the base against the underside of the work surface, tighten the bolt in a clockwise direction. * Screw in For mounting on surfaces *Screws not supplied with unit DIMENSIONS: Width: Length: 2-Way: 3-Way: 4-Way: Total Height: 55mm (Approx. 2.17 in.) 204mm (Approx. 8 in.) 273mm (Approx. 10.75 in.) 342 mm (Approx. 13.46 in. ) 36.5mm (Approx. 1.43 in.) WORK SURFACE THICKNESS: 10mm - 50mm (Approx. 0.4 in. - 2 in.) ELECTRICAL: Operating Voltage: Current: Max Power: 220V - 250V @ 50 Hz 110V - 125V AC @ 60 Hz 15A (20A - upgraded wiring) 1800W @ 110V - 125V AC 3000W @ 220V - 250V AC MAINTENANCE AND CARE: Ensure unit is disconnected prior to cleaning. Clean the unit with a damp cloth and dry immediately. Do not use harsh chemical solvents. 315° 0° 45° 270° 225° 90° 180° 135° Socket Orientations: This socket is currently at 0° PLEASE NOTE: All products carry a 12 month limited warranty which excludes normal wear and tear and product abuse. The warranty will be void in the event of product tampering. WARNING For indoor use only If any malfunction occurs, do not attempt to repair Return product to manufacturer for repair Do not insert foreign objects into power outlets For counter top or bottom mounting For other options, contact your distributor © 2014 Copyright Powerlogic SA (Pty) Ltd. All Rights Reserved. Due to continual product improvements and upgrades, Power Logic reserves the right to amend and change products as it sees fit. As such, images of products are for indicative purposes only and actual products may vary from those depicted and certain options may be unavailable. Always check with your distributor or with Power Logic regarding availability of the product of your choice.