How the Aquaheat works Aquaheat uses refrigeration technology to extract heat from the surrounding air and transfers it to the swimming pool. Recycle The refrigerant restarts the process and flows through the evaporator air coil to collect heat once again. Heat extraction The fan circulates air through the evaporator air coil that acts as a heat collector. The liquid refrigerant in the evaporator air coil absorbs the available heat from the ambient air. Heat Intensification The compressor then receives the warmed refrigerant and intensifies the heat. The intensely hot refrigerant is then pumped into the heat exchanger. Heat Transfer The heat from the hot refrigerant flowing inside the heat exchanger is then transferred to the pool water. Heat intensification 6. Compressor 7. Heat exchanger 8. Filter 9. Water Pump 10. Pool 10 Heat Transfer 4 2 1. Warm air in 2. Fan 3. Evaporator 4. Warm gas 5. Cool air out Aquaheat 10 kW 278102 35,000 10 10.4 9.0 240 Single Phase 2.3 12.5 0.65 20 11 - 40 18 - 40 57 R407 Black 740 x 560 x 820 40 100 / 220 Aquaheat 13 kW 278132 45,000 13 12.9 10.5 240 Single Phase 2.9 14.5 0.65 20 11 - 40 18 - 40 57 R407 Black 740 x 560 x 820 40 100 / 220 Aquaheat 16 kW 278162 55,000 16 15.8 13.5 240 Single Phase 3.8 17.4 1 30 11 - 40 18 - 40 59 R407 Pewter 750 x 850 x 880 40 130 / 250 Aquaheat 21 kW 278212 70,000 21 20.5 19.0 240 Single Phase 4.2 21.0 1 30 11 - 40 18 - 40 80 R407 Pewter 750 x 850 x 880 40 130 / 250 6 Heat Extraction 1 Technical Specifications Specifications Product Code Nominal Heating Capacity BTU* Nominal Power Output (kW)* Test Lab : Air 26 C / Water 26 C / RH 63% Test Lab : Air 15 C / Water 24 C / RH 70% Supply Voltage (VAC) Supply Voltage Phase Power Consumption (kW/h) Unit Running Amperage (AMP) Fan Full Load Amps (FLA) Breaker or Fuse (AMP) Min / Max Ambient Temp (Co) Min / Max Water Inlet Temp (Co) Weight (kg) Refrigerant type Colour Dimensions W x L x H (mm) Water Connections (mm) Min / Max Water Flow Rate (LPM) Sizing Chart to Heat Your Pool to 28ºC 7 Pool Size (m) 3x6 3x7 4x7 4.5 x 8.5 9 5 8 3 Temperate Location* Min 12 hrs / Day Run time With Pool Cover No Pool Cover 10kW 16kW 13kW 25kW MKIII 16kW 31kW MKIII 21kW 37kW MKIII Litres Up to 21000 Up to 28000 Up to 35000 Up to 55000 Warm Location** Min 12 hrs / Day Run time With Pool Cover No Pool Cover 10kW 13kW 10kW 16kW 13kW 25kW MKIII 16kW 31kW MKIII Note: Heat pump sizing is influenced by ambient temperature, humidity, use of a pool cover, night time temperature, pool location, wind factor, water features and if the unit is switched off over night. Recycle *Temperate Location:- Where minimum average daytime temperatures between September to May are not less than 18ºC. ** Warm Location:- Where minimum average daytime temperatures between September to May are not less than 24ºC Dimensions Clearance Cost effective heating No obstruction above Heat pumps only require energy to operate a compressor and a fan motor, using low amperage in the process. The Aquaheat can produce up to 5 times more heat energy than the electrical power it consumes. H For every 1kW of electricity consumed, Aquaheat can produce up to 5 kW of heat. Clearance 60 to 90cm L W OFFICES - AUSTRALIA NSW - Sydney (Head Office) Tel: +61 2 9898 8600 QLD - Brisbane Tel: +61 7 3299 9900 VIC/TAS - Melbourne Tel: +61 3 9764 1211 WA - Perth Tel: +61 8 9273 1900 SA/NT - Adelaide Tel: +61 8 8244 6000 ACT Distribution Tel: +61 2 6280 6476 L Clearance 60 to 90cm W OFFICES - OVERSEAS Waterco (Europe) Limited Sittingbourne, Kent. UK Tel: +44 (0) 1795 521 733 Waterco (C) Limited Guangzhou, China Tel: +86 20 3222 2180 Waterco (USA) Inc Augusta, Georgia, USA Tel: +1 706 793 7291 Waterco (Far East) Sdn Bhd Selangor, Malaysia Tel: +60 3 6145 6000 Waterco Canada Longueuil, Quebec, Canada Tel: +1 450 748 1421 PT Waterco Indonesia Jakarta, Indonesia Tel: +62 21 4585 1481 Waterco (NZ) Limited Auckland, New Zealand Tel: +64 9 525 7570 Waterco Singapore Intl Pte Ltd Nehsons Building, Singapore Tel: +65 6344 2378 Waterco France SAINT PRIEST, France. Tel: +33 4 72 79 33 30 Aquaheat heat pumps are an energy efficient way to heat your pool and extend your swimming season. Clearance 60 to 90cm distributed by: In the interest of providing better quality and value we are constantly improving and updating our products. Consequently, pictures and information on our brochures may sometimes vary slightly from models available. ZZB156704/13 Save up to 80% over propane gas, 50% over natural gas and 500% over electric heaters. H Clearance 60 to 90cm • Energy efficient heating • Temperature management & self-diagnosis • Weather proof cabinet • Titanium Heat Exchanger www.waterco.com Energy efficient heating Temperature management & self-diagnosis Powerful heat transfer Inbuilt protection devices Titanium heat exchanger Extra large evaporator area A swimming pool is a major financial investment. Getting the most out of your pool, means keeping the pool at a swimmable temperature for the maximum number of hours in each day and the maximum number of days in each year. Aquaheat’s LED control panel provides a continuous digital pool temperature display and incorporates a self diagnosis system. In the event of a problem, the control panel will display diagnostic error codes. The exclusive design of the Aquaheat’s heat exchanger creates an unmatched and powerful heat transfer source. Surface area contact with the heat exchanger is maximised by circulating water though its condenser tubes. The integrity and performance of your pool heater and its components are protected by built-in safety devices Titanium heat exchangers have a longer life expectancy than standard copper heat exchangers. Titanium offers total protection against erosion and corrosion, it is resistant to: chlorinated water, ozone, iodine, Baquacil, bromine and salt water. Aquaheat has an extra large evaporator allowing it to extract more heat from the outside air maximising the heat pump’s performance and efficiency. A heat pump will economically keep your pool warm 24 hours a day. Compared to gas and electric heaters, Aquaheat uses just a fraction of the energy to generate the same amount of heat and unlike solar heating; there is no reliance on the sun as the latent heat in the air is used. Aquaheat heat pumps are an ideal solution for heating: • Your swimming pool as a solar replacement / season extender. • Plunge pools • Swim spas and spas • Auto defrost control to eliminate frost on the evaporator. • Auto flow switch to shutdown the system in the event of no water flow. • High / Low pressure refrigerant auto reset to shutdown the system in the event of low or high refrigerant pressure • Compressor protection start up time delay to allow the refrigerant to equalise before the compressor starts/restarts. Efficient scroll compressor Aquaheat’s are powered by a Scroll compressor, the most power ful, energy efficient compressors on the market and most importantly they are also the quietest R407 Refrigerant Aquaheat heat pumps use R407 refrigerant which is kinder to the environment. Weather proof cabinet The Aquaheat’s cabinet is constructed of heavy-duty UV-resistant ABS body panels that are impervious to rust, corrosion and deterioration. Quick and easy outdoor installation Simply connect the pool return line to and from the heat pump and connect the power source. 5 year warranty Aquaheat is covered by a 5 (2+3) year warranty for residential installations and a 1 year warranty for commercial installations. 16 & 21kW 10 & 13kW www.waterco.com
© Copyright 2024