VERONEX Cases
VERONEX is a breakthrough in plastic enclosure design, combining the versatility
and functionality demanded by engineers, with the modern styling appreciated
by their customers.
The VERONEX range, available in 5 different plan sizes and 9 heights, is
manufactured in UL94-V0 flame retardant ABS. The enclosures boast an
attractive, lightly textured non-scratch finish which has been achieved using a
unique chemical etch process.
A selection of quality accessories ideally suits VERONEX enclosures to a wide
variety of OEM and consumer electronics, electrical and telecommunications
applications. (see page14).
MATERIAL PERFORMANCE CHARACTERISTICS
ABS (FLAME RETARDANT)
MECHANICAL PROPERTIES
Izod impact strength
Units
J/m
Test method
ASTM D256
Result
60
ISO R180
Impact strength
Unnotched
Notched
Tensile properties
Yield strength
Failure strength
Elastic modulus
Flexural properties
Maximum load
Deflection at break
Elastic modulus
THERMAL PROPERTIES
Heat deflection temperature
Vicat softening point
Melt flow index
UL combustibility test
UL file number
ELECTRICAL PROPERTIES
Specific volume resistivity
Dielectric strength
KJ/m2
KJ/m2
KJ/m2
DIN 53453
ISO R179
70
7
N/mm2
N/mm2
N/mm2
similar to DIN53455
17
22
1800
N/mm2
mm
N/mm2
ASTM D790
ISO 178
35
1900
Units
°C
Test method
ASTM D648
DIN 53461
ISO 75A
ASTM D1525
DIN 53460
ISO 306
ASTM D1238
DIN 53735
ISO R1133
UL subject 94
Result
85
Test method
DIN 53482
VDE 0303
IEC243
DIN 53481
Result
450
°C
°C
g/10mins
Fire classification
E70014(M)
Units
Ohm. cm
KV/mm
ISO R527
VERONEX
98
89
10
V-O
44
7
VERONEX IP62 Rated Cases
The VERONEX IP62 range is available in 4 plan sizes and 9 different heights. The
enclosure is a simple two part construction with plastic end panels which are
readily push fitted between two ribs in the case moulding. This, together with the
tongue-and-groove joint which connects the two covers, achieves the IP62 seal
against the ingress of dust and water.
Contents of kit
Description
Base moulding
Top moulding
Moulded end panels
Case fixing screws
Self adhesive feet
(size 3 and 4 only)
Self-tapping pcb screws
Qty.
1
1
2
4
4
Material/Finish
RAL 7035,UL94-V0 flame retardant ABS
RAL 7035,UL94-V0 flame retardant ABS
RAL 7037,UL94-V0 flame retardant ABS
VERONEX IP62 size 1 and 2
4
SIZE 1
EXPLANATION OF IP RATING
Usable
wall height
Ordering information
Description
Size 1
Size 1 Black
Size 2
Size 2 Black
H
90
90
90
90
90
120
120
120
120
120
W
50
50
50
50
50
60
60
60
60
60
D
16
24
32
16
24
30
40
50
30
40
Order code
75-227894
75-227895
75-227896
75-237424
75-237425
75-227897
75-227898
75-227899
75-237426
75-237427
PCB
Centres
 = Limitation of infress of dust
 = Protection against water dripping non-vertically
50.00 PCB Centres
82.8 Usable internal length
For details of a full range of VERONEX compatible accessories, please refer to
page 15.
SIZE 2
PCB
Centres
80.00 PCB Centres
111.40 USABLE INTERNAL LENGTH
8
Usable
wall height
9.6 / 19.2
VERONEX IP62 Rated Cases
Contents of kit
Item/Description
Base moulding
Top moulding
Moulded end panels
Case fixing screws
Self adhesive feet
(size 3 and 4 only)
Self-tapping pcb screws
Ordering information
Description
Size 3
Size 3 Black
Size 4
Qty.
1
1
2
4
4
Material/Finish
RAL 7035,UL94-V0 flame retardant ABS
RAL 7035,UL94-V0 flame retardant ABS
RAL 7037,UL94-V0 flame retardant ABS
4
H
150
150
150
150
150
190
190
W
80
80
80
80
80
100
100
D
30
45
60
30
45
40
60
Order code
75-227900
75-227901
75-227902
75-237429
75-237430
75-227903
75-227904
190
100
80
75-227905
VERONEX IP62 size 3 and 4
SIZE 3
Usable
wall height
For details of a full range of VERONEX compatible accessories, please refer to
page 15.
55.00 PCB Centres
110.00 PCB Centres
100.00 PCB Centres
141.40 Usable internal length
Usable
wall height
14.0 / 35.0
SIZE 4
75.00 PCB Centres
150.0 PCB Centres
Usable internal length
9
10
VERONEX Hand–held Cases
These size 2 and 3 cases are supplied in black and feature both LCD display and
membrane keypad areas on the top cover, and a battery compartment on the base.
Qty.
1
1
2
4
4
Ordering information
Description: With battery compartment
Size
L
2
120
150
3
150
Material/Finish
Black, UL94-V0 flame retardant ABS
Black, UL94-V0 flame retardant ABS
Black, UL94-V0 flame retardant ABS
Clear polycarbonate
VERONEX hand held
W
60
80
80
H
30
30
45
Order code
75-237428
75-237431
75-237432
SIZE 2 LCD TOP
Membrane recess = 1.0 mm
74.00 Key pad area
Key pad area
Contents of kit
Description
Base moulding
1 Top moulding
2 Moulded end panels
4 Fixing screws
4 Self tapping pcb screws
LCD lens
For details of a full range of VERONEX compatible accessories, please refer to
page 15.
SIZE 3 LCD TOP
Key pad area
Membrane recess = 1.0 mm
96.00 Key pad area
SIZE 3
with battery compartment
60.00 PCB Centres
60.00 110.00 PCB Centres
141.40 Usable internal length
11
VERONEX Instrument Cases
The instrument case range consists of two cover mouldings and two end panels
- one plastic and one aluminium.
Battery compartments with sliding covers are supplied as standard in 9 different
unit sizes. Battery holders, used in conjunction with the battery compartment
are designed to accept a variety of battery sizes.
The two smaller plan sizes (2 and 3) can be fitted with an optional belt clip
accessory, and the larger units are supplied with 4 self adhesive non slip feet for
table top instrumentation applications. Knock-out keyslots are stamped in the
mouldings for wall mounted instrumentation applications.
Contents of kit
Description
Base moulding
Top moulding
Moulded end panel
Aluminium end panel
Case fixing screws
Qty.
1
1
1
1
4
VERONEX instrument
Material/Finish
RAL 7035,UL94-V0 flame retardant ABS
RAL 7035,UL94-V0 flame retardant ABS
RAL 7035,UL94-V0 flame retardant ABS
1,6mm anodised aluminium
SIZE 2
Usable
wall height
with battery
compartment
Self adhesive feet
4
(sizes 3,4 and 5)
Self tapping pcb screws
4
Battery cover in battery compartment versions.
W
60
60
60
60
60
60
D
30
40
50
30
40
50
Order code
75-228099
75-228100
75-228101
75-228102
75-228103
75-228104
Description: With battery compartment
Size
H
2
120
2 
120
3
150
3 
150
W
60
60
80
80
D
30
40
30
45
Order code
75-227915
75-227916
75-227917
75-227918
 Case will accept Shallow Battery Box
 Case will accept either Shallow or Deep Battery Box
111.40 Usable internal length
PCB Boss position
in plain case
SIZE 3
with battery
compartment
Usable
wall height
PCB Centres
PCB Centres
Ordering information
Description: Without battery compartment
Size
H
120
2
120
120
120
3
120
120
For details of a full range of VERONEX compatible accessories, please refer to
page 15.
141.40 Usable internal length
PCB Boss position
in plain case
SIZE 2 - SHALLOW BATTERY BOX
SHALLOW
SHALLOW
DEEP
SHALLOW
12
VERONEX Instrument Cases
Contents of kit
Description
Qty.
Material/Finish
Base moulding
1
RAL 7035,UL94-V0 flame retardant ABS
Top moulding
1
RAL 7035,UL94-V0 flame retardant ABS
Moulded end panel
1
RAL 7035,UL94-V0 flame retardant ABS
Aluminium end panel
1
1,6mm anodised aluminium
Case fixing screws
4
Self adhesive feet
4
(sizes 3,4 and 5)
Self tapping pcb screws
4
Battery cover in battery compartment versions. (as base moulding)
5
185
185
185
Description: With battery compartment
Size
H
4
190
4 
190
5
185
5 
185
VERONEX instrument
W
100
100
100
D
40
60
80
Order code
75-228105
75-228106
75-228107
135
135
135
40
65
80
75-228108
75-228109
75-228110
W
100
100
135
135
D
40
60
40
65
Order code
75-227920
75-227921
75-227922
75-227923
 Case will accept Shallow Battery Box
 Case will accept either Shallow or Deep Battery Box
For details of a full range of VERONEX compatible accessories, please refer to
page 15.
SIZE 4
with battery
compartment
SIZE 5
with battery
compartment
Usable
wall
height
Usable
wall
height
100.0 PCB Centres
150.0 PCB Centres
95.0 PCB Centres
110.0 PCB Centres
Ordering information
Description: Without battery compartment
Size
H
190
4
190
190
179.9 Usable internal length
PCB Boss position
in plain case
145.00 PCB Centres
PCB Boss
position
in plain case
175.0 Usable internal length
SIZE 4 - SHALLOW / DEEP BATTERY BOX
SHALLOW
DEEP
SHALLOW
SIZE 5 - SHALLOW / DEEP BATTERY BOX
SHALLOW
DEEP
SHALLOW
13
VERONEX EMC Cases
VERONEX EMC cases have been introduced to meet the increasing demand for
protection from potentially damaging E and H field interferences.
The mouldings have been coated with copper silver paint (25m - 50m) and
the tongue and groove joints ensure good continuity along the enclosure. The
end panels are also uniquely retained to ensure good electrical contact when
coatings are applied.
The enclosures available offer a variety of styles, plastic end panels, metal end
panels, battery compartments and accessories.
Contents of kit
Description
Qty
Material/Finish
Base moulding
1
RAL 7035,UL94-V0 flame retardant ABS
Top moulding
1
RAL 7035,UL94-V0 flame retardant ABS
Moulded end panel
2
RAL 7035,UL94-V0 flame retardant ABS
Case fixing screws
4
Self adhesive feet
4
(sizes 3,4 and 5)
Self tapping pcb screws
4
Battery cover in battery compartment versions (as base moulding)
Ordering information
Size
1
2
3
4
H
90
90
120
150
190
190
W
50
50
60
80
100
100
D
16
24
30
30
40
60
Order code
75-245323
75-245324
75-245325
75-245327
75-245328
75-245326
 Note: Battery compartment version
For details of a full range of VERONEX compatible accessories, please refer to
page 15.
14
VERONEX EMC cases
RFI SHIELDING EFFECTIVENESS
Case coating
Zinc Arc spray
Case coating
Evaporative Disposition
Case coating
Copper Silver paint
Attenuation (Db)
Good adhesion is achieved on plastic substrate and the copper silver is resistant
to atmospheric oxidation and corrosion. Coatings are applied by conventional
spraying techniques using electroform masks for precise selectivity of coverage.
E Field
Frequency (Hz)
Plane
wave
VERONEX Accessories
VENTED END PANELS
In addition to the plastic and aluminium panels, ventilated aluminium end panels
are available for all size 2 units. These are useful for enclosures which are required
to house small alarms or buzzers, or to permit airflow across delicate components.
Ordering information
Qty.
1
Size 2 Case
1
1
H
120
120
120
W
60
60
60
D
30
40
50
Order code
75-227740
75-227742
75-227745
BELT-CLIPS
Belt-clips, manufactured in RAL 7035 high impact polystyrene, can be fitted
to sizes 1, 2 and 3 units of the VERONEX range. They are supplied with fixings
which screw into two of the four case moulding mounting bosses.
VERONEX Accessories
ABSORPTION
Ordering information
Size
Qty
Size 1 Case
1
Size 2 Case
1
Size 3 Case
1
Black
75-237433
75-237434
75-237435
Grey
75-226648
75-226658
75-226670
100%
POLYCARBONATE LCD COVERS
Polycarbonate windows are available for fitting over LCD displays in the case
moulding recess. Size 2 units will accept a 40x20mm LCD (viewing area 31x14)
and size 3 will accept a 60x30mm LCD (viewing area 47x18mm).
Ordering information
Size
Qty.
Size 2 Case
1
Size 3 Case
1
1100NM
750NM
Order code
75-250724
75-250718
BATTERY BOXES
Wavelength (Nanometers)
INFRA RED END PANELS
Battery compartments are available in 2 depths. The shallow recess can accept
one PP3 or one 2AAA battery holder, while the deeper compartment is suitable
for one 4AA, one 2AA or one 4AAA holder.
These are designed to fit neatly into the VERONEX enclosures giving a medium
transparent to infra red transmissions. The wavelength of operation is between
750nm and 1100nm. These are ideally suited to remote control applications.
Ordering information
Type
Qty.
Battery holders
Shallow
1
Accept 1 x PP3 or 2 x AAA holders
Deep
1
Accept 1 x 4AA or 1 x 2AA or 1 x 4AAA holder
Ordering information
Size
Colour
Order code
75-226685
75-226686
SELF-ADHESIVE RUBBER FEET
Self-adhesive rubber feet are available for fixing to the base of VERONEX units in
tabletop applications.
Ordering information
Feet
Qty.
Self-adhesive feet
4
Size 1 Case
Black
Size 2 Case
Size 3 Case
Size 4 Case
Black
Black
Black
H
90
90
120
150
190
W
50
50
60
80
100
D
16
24
30
30
40
Order code
75-237739
75-237741
75-237742
75-237743
75-237744
Order code
75-228117
BATTERY HOLDERS
Battery holders are used in conjunction with the deep or smaller battery boxes.
These give the user maximum flexibility in selecting the battery type required.
Ordering information
Description
PP3 leads
2AA holder
4AA holder
2AAA holder
4AAA holder
Qty
10
1
1
1
1
Order code
75-28183J
75-227429A
50-1717G
75-227427G
75-226687A
15