1. No category

Manual to modify the rear postmound adapter
at the Capra
Preamble
Due to given tolerances when manufacturing goods, it might happen
that the brake-pads of the Brake assembled on your CAPRA does not
fully cover the surface of the Disc.
Because of this there had been cases that a little part of the brake-pad
remains untouched.
In no case this is a frunctionality- or security-decreasing issue but only
cosmetical.
However, we decided to alter the Adapter in its height to ensure the
brake-pads to cover the disc completely.
Additionally we send you some new brake pads so that you can swap
them with those which are worn unevenly.
The following manual describes in detail how to swap the adapter and
the brake-pads.
Fon +49 (0) 9191 . 736305 0 // Fax +49 (0) 9191 . 736305 55 // Mail: [email protected] // Web: http://www.yt-industries.com
YT Industries GmbH Zweibrückenstraße 2 D-91301 Forchheim
Handelsregister: Amtsgericht Essen HRB 19447 // Geschäftsführer: Markus Flossmann; Stefan Willared // UID-Nr.: DE 254 214 335
Sitz der Gesellschaft: Stoppenberger Str. 61, D-45141 Essen
Manual to modify the rear postmound adapter
at the Capra.
Description
1
Original Avid PM 20mm
Adapter
2
New YT PM 200mm
Adapter
- 1: Original SRAM Adapter PM 20mm including the original
M6x32-40mm Allenscrews.
- 2: New YT Discbrake-Adapter PM 200mm including 2x V2A
M6x32mm Allenscrews. (screws only for CAPRA Comp 1 & 2)
Fon +49 (0) 9191 . 736305 0 // Fax +49 (0) 9191 . 736305 55 // Mail: [email protected] // Web: http://www.yt-industries.com
YT Industries GmbH Zweibrückenstraße 2 D-91301 Forchheim
Handelsregister: Amtsgericht Essen HRB 19447 // Geschäftsführer: Markus Flossmann; Stefan Willared // UID-Nr.: DE 254 214 335
Sitz der Gesellschaft: Stoppenberger Str. 61, D-45141 Essen
Manual to modify the rear postmound adapter
at the Capra.
Disassembling of the original Avid Adapter
Pic. 1
Pic. 3
Pic. 2
Picture 1 - Rear Brake as
delivered with original Avid
PM20mm Adapter.
Picture 2 u. 3 - Unscrew both
screws which hold the brakecaliper and Adapter on the
seatstay.
Fon +49 (0) 9191 . 736305 0 // Fax +49 (0) 9191 . 736305 55 // Mail: [email protected] // Web: http://www.yt-industries.com
YT Industries GmbH Zweibrückenstraße 2 D-91301 Forchheim
Handelsregister: Amtsgericht Essen HRB 19447 // Geschäftsführer: Markus Flossmann; Stefan Willared // UID-Nr.: DE 254 214 335
Sitz der Gesellschaft: Stoppenberger Str. 61, D-45141 Essen
Manual to modify the rear postmound
adapter at the Capra.
Disassembling of the original Avid Adapter
Pic. 4
Pic. 5
Picture 4 u. 5 – You now unscrewed both screws and can take off the
brake-caliper and Adapter.
Fon +49 (0) 9191 . 736305 0 // Fax +49 (0) 9191 . 736305 55 // Mail: [email protected] // Web: http://www.yt-industries.com
YT Industries GmbH Zweibrückenstraße 2 D-91301 Forchheim
Handelsregister: Amtsgericht Essen HRB 19447 // Geschäftsführer: Markus Flossmann; Stefan Willared // UID-Nr.: DE 254 214 335
Sitz der Gesellschaft: Stoppenberger Str. 61, D-45141 Essen
Manual to modify the rear postmound adapter
at the Capra.
Assembling the YT PM 200mm Adapter.
Pic. 6
Pic. 7
Picture 6 u. 7 - After taking off the original Avid PM 20mm Adapter
incl. the original screws, replace it with the resent YT PM200mm
Adapter
Attention: Please be advised that only the resent Screws can be used
with this Adapter.
The original Avid Screws are too long.
Fon +49 (0) 9191 . 736305 0 // Fax +49 (0) 9191 . 736305 55 // Mail: [email protected] // Web: http://www.yt-industries.com
YT Industries GmbH Zweibrückenstraße 2 D-91301 Forchheim
Handelsregister: Amtsgericht Essen HRB 19447 // Geschäftsführer: Markus Flossmann; Stefan Willared // UID-Nr.: DE 254 214 335
Sitz der Gesellschaft: Stoppenberger Str. 61, D-45141 Essen
Manual to modify the rear postmound adapter
at the Capra.
Swapping of the brake-pads
2 Securing bolt
1 Securing clip
3 Brake pads incl. spring
Pic. 8
Picture 8 – After replacing the Adapter, it now is the brake-pad's turn.
Please follow these steps:
- Firstly, disassemble the securing clip by pulling it off the screw.
- After this unscrew the securing bolt from the brake-caliper.
Fon +49 (0) 9191 . 736305 0 // Fax +49 (0) 9191 . 736305 55 // Mail: [email protected] // Web: http://www.yt-industries.com
YT Industries GmbH Zweibrückenstraße 2 D-91301 Forchheim
Handelsregister: Amtsgericht Essen HRB 19447 // Geschäftsführer: Markus Flossmann; Stefan Willared // UID-Nr.: DE 254 214 335
Sitz der Gesellschaft: Stoppenberger Str. 61, D-45141 Essen
Manual to modify the rear postmound adapter
at the Capra.
Swapping of the brake-pads
Pic. 9
Pic. 10
Picture 9 - Subsequently you can extract the brake-pads by pushing
them a little to the front and then pulling them upwards out of the
brake-caliper. The assembling of the new brake-pads is done in the
opposite direction.
Picture 10 - Brake-caliper without brake-pads.
Fon +49 (0) 9191 . 736305 0 // Fax +49 (0) 9191 . 736305 55 // Mail: [email protected] // Web: http://www.yt-industries.com
YT Industries GmbH Zweibrückenstraße 2 D-91301 Forchheim
Handelsregister: Amtsgericht Essen HRB 19447 // Geschäftsführer: Markus Flossmann; Stefan Willared // UID-Nr.: DE 254 214 335
Sitz der Gesellschaft: Stoppenberger Str. 61, D-45141 Essen
Manual to modify the rear postmound adapter
at the Capra.
Swapping of the brake-pads
Pic. 12
Pic. 11
Picture 11 u. 12 - After swapping the Adapter including the screws and brakepads you need to readjust the brake. This is done like this:
- Tighten the Screws until you can move the brake-caliper only a little bit
- Now adjust the brake-caliper according to the light- gap between disc and
brake-pads (picture 11)
- After this carefully tighten the screws in an altering way so that the brakecaliper does not vary in its position
- Finally tighten the screws with 8 to 10 Nm.
Fon +49 (0) 9191 . 736305 0 // Fax +49 (0) 9191 . 736305 55 // Mail: [email protected] // Web: http://www.yt-industries.com
YT Industries GmbH Zweibrückenstraße 2 D-91301 Forchheim
Handelsregister: Amtsgericht Essen HRB 19447 // Geschäftsführer: Markus Flossmann; Stefan Willared // UID-Nr.: DE 254 214 335
Sitz der Gesellschaft: Stoppenberger Str. 61, D-45141 Essen