Total # of pages: FAX TO: 603.298.8404 Perfect Brake Job. Every time. PRO-CUT ADAPTER GUIDE PFM-2: BASIC PACKAGE PFM-5: MASTER PACKAGE PFM-7: HD TRUCK PACKAGE STANDARD CAR/SUV/PICKUP ADAPTERS 50-687 50-687 4-Hole Adapter — Fits most 4-lug vehicles. 50-688 5-Hole Adapter — Fits most 5-lug vehicles. 50-695 Small Truck/Larger Car Adapter — Fits many smaller trucks and SUVs 50-688 such as the Dakota and Envoy and also larger cars such as the Chrysler 300 and Buick LeSabre. 50-691 1/2-Ton Truck Adapter/Common — Fits most pickups and sport utility vehicles in the 1/2-ton range including Ford F150 up to and including 2003. 50-699 Tall Hub Truck Adapter — Primarily designed to fit the 2003+ Expedition and 2004+ F150, this adapter shares patterns with other common trucks that have tall hubs which may interfere with the 50-691 adapter. 50-695 50-691 50-699 STANDARD HEAVY DUTY TRUCK ADAPTERS 50-935 50-935 Dual Wheel Adapter/Common — Fits most dual-wheel vehicles front and rear. 50-683 50-683 Heavy Duty Truck Adapter (8 & 10 Lug) — Fits 3/4- and 1-ton Ford, Dodge, and Chevy trucks and vans. SPECIALTY ADAPTERS 50-696 Rover Adapter — Fits Land Rovers and Range Rovers. 50-681 1/2-Ton Truck Adapter/Alternate — Fits most pickups and sport 50-696 utility vehicles including the Toyota Land Cruiser/VW Touareg (does NOT have common Ford pattern). 50-939 50-681 Dual Wheel Box Truck Adapter for Mitsubishi/Isuzu and others 50-939 Has 5 on 208 and 6 on 222 bolt patterns. DUAL WHEEL REAR EXTENSIONS 50-495K Extension Kit — for flat slide plates 50-498 and 50-499 only — Allows cutting head to reach rotor in high offset situations like Ford F450 & F550. Includes three sets of adapter standoffs for all Ford trucks. May require the use of an extended lead screw. Kit includes Extended Plate, and 50-005, 50-007, and 50-009 Stand Offs. 50-492K Extension Kit — for 50-496 (Speed-Lock) slide plate only — Allows cutting head to reach rotor in 50-495K high offset situations like Ford F450 & F550. Includes three sets of adapter standoffs for all Ford trucks. May require the use of an extended lead screw. Kit includes Extended Plate, and 50-005, 50-007, and 50-009 Stand Offs. (Image not shown.) 50-006 50-006 GM 3500HD Stand Offs to extend the dual wheel adapter over rear hubs. May require the use of extension plate (call factory or local rep for details and other part numbers required). 50-035 50-035 Extended Lead Screw — Required for use on rear rotors larger than 15.25” — some F550s, for example. For lathes with 50-498 or 50-496 slide plates only. 800.543.6618 [email protected] 10 Technology Drive, #4 West Lebanon, NH 03784 USA www.procutusa.com 603.298.5200 fax: 603.298.8404