WELDLINE SPRAY SELECTED SPRAY PRODUCTS PRODUCTS Leak detection – Against spatter - Against Corrosion 1000 BULLES For leak detection. Use: Spray 1000 BULLES in the solder or welded joints in gas installations. Leaks appear immediately. This product can be used for all gases. [Skri1v et citat fra dokumentet, eller gengiv en interessant pointe. Du kan placere tekstboksen et Art nr. W 000 011fanen 090 090 Tekstboksværktøjer til at redigere formateringen i hvilket som helst sted i dokumentet. Brug tekstboksen med uddraget.] Art nr. W 000 011 092 092 SPRAYMIG SVB Against spatter. Use: Spray-on and in MIG-MAG torch gasnozzle and outside of contact tip, to prevent attachement of spatter. Used on cold parts. The product is silicon free, and therefore compatible with paint. Art nr. W 000 011 094 094 GALVASPRAY For the protection of the welding. Galva spray can be painted or lacquered. Technical data and use: Galva spray provides a smooth zink finish, which is resistant to oxidation and corrosion (more than 80 hours in salty fog). Fast drying time (about 5 min). Clean and degrease the area to be treated. Shake the can at least 1 minute before use. Spray at 25 cm distans by short and regular passes. June 2011 OERLIKON SKANDINAVIEN AB, AB, Tele Tele 040040-670 1500 Fax 040040-670 1501, 1501, www.oerlikon.se
© Copyright 2024