1. No category

Preliminary schedule
CORROSION 2014
17.00 – 20.00
9.00 – 11.30
11.30 – 12.00
MONDAY 17.11.2014
Registration (Conference Office – Hall)
TUESDAY 18.11.2014
Registration (Conference Office – Hall)
Opening Ceremony (Room A)
Invited lecture:
12.00 – 12.40
Mathew T. MATHEW (Rush University Medical Center, USA
)
Impact of tribocorrosion research in bio-implants: Over-view and current status
Invited lecture:
12.40 – 13.20
Halina KRAWIEC (AGH University of Science and Technology, Poland
)
Application of electrochemical microcell technique in solid state surface analysis
Invited lecture:
13.20 – 14.00
Dalibor VOJTĚCH (Institute of Chemical Technology, Czech Republic
)
Corrosion and mechanical behavior of biodegradable metallic biomaterials
Lunch (Hall)
SESSION 1 (Room C)
SESSION 2 (Room D)
14.00 – 15.00
15.00 – 15.30
Keynote lecture: Linda DIBLÍKOVÁ (Czech Republic
)
Keynote lecture: Fabio COVA CAIAZZO (Italy
)
Properties of functional epoxy coatings modified by carbon Corrosion behavior of Cr/CrN multi-layer coatings for molds of
nanoparticles
plastics
15.30 – 16.00
Keynote lecture: Lidia BENEA (Romania
)
Nanocomposite layers obtained by electro-co-deposition:
Corrosion and tribocorrosion properties
Keynote lecture: Henryk BALA (Poland
)
Hydrogen absorption by Co substituted Nd-Fe-B highcoercivity magnetic materials
16.00 – 16.20
Lidia BENEA (Romania
)
Fretting-corrosion behavior of Ni/WC nanocomposite
coatings in boric acid and lithium hydroxide solution
Arkadiusz GAJEK (Poland
)
Electrochemical investigation of hydrogen permeation through
zirconium membranes
16.20 – 16.40
16.40 – 17.00
17.00 – 17.30
Anita OLSZÓWKA-MYALSKA (Poland
)
Study of interaction between liquid magnesium alloys-glassy
carbon particles
Jorge RAMÍREZ-CANO (Mexico
)
Adsorption kinetics of benzothiazole and 2-mercaptobenzothiazole on microcrystalline gold and silver surfaces
Marie-Eve DRUART (Belgium
)
Effect of doping with cerium inhibitors and nanoparticles on
the anticorrosive properties of sol-gel layer deposited on
aluminum alloys
Coffee Break (Hall)
17.30 – 18.00
Keynote lecture: Alex LUGOVSKOY (Israel
)
Comparison of electrochemical corrosion behavior of MRI
230M magnesium alloy with and without plasma electrolytic
oxidation treatment
Keynote lecture: María CRIADO (Spain
)
Corrosion behaviour of hybrid organic-inorganic coated steel in
simulated concrete pore solution
18.00 – 18.20
Magdalene IKPI (Nigeria
)
Effect of cadmium addition on the galvanic corrosion of
AM60 magnesium alloy in 0.1 M sodium chloride solution
Joshua OKENIYI (Nigeria
)
Inhibition of steel-rebar corrosion in industrial/microbial
simulating-environment by Morinda Lucida
18.20 – 18.40
Paweł NOWAK (Poland
)
Polarization resistance of corroding magnesium alloys
Joshua OKENIYI (Nigeria
)
Corrosion of concrete steel-reinforcement in saline/marine
simulating-environment in the presence of Rhizophora mangle L.
18.40 – 19.00
19.00 – 21.00
Enrico VOLPI (Italy
)
Lech KWIATKOWSKI (Poland
)
Study of mild steel passivation and depassivation in simulated
Increasing the surface functionality of Mg alloys by means
concrete pore solution containing bacteria metabolites
of plasma electrolytic oxidation
Poster session 1 / Dinner (Hall)
WEDNESDAY 19.11.2014
INVITED LECTURES (Room A)
Invited lecture:
9.00 – 9.40
Michael SCHORR (University of Baja California, Mexico
)
The natural gas industry: equipment, materials, corrosion
Invited lecture:
9.40 – 10.20
Aleksandra BARON-WIECHEĆ (Culham Centre for Fusion Energy, UK
)
Application of Ion Beam Analysis in understanding formation mechanism of protective anodic oxide films
Invited lecture:
10.20 – 11.00
Andrzej KRÓLIKOWSKI (Warsaw University of Technology, Poland
)
Corrosion behaviour of nanocrystalline alloys
Coffee Break (Hall)
SESSION 1 (Room C)
SESSION 2 (Room D)
11.00 – 11.30
11.30 – 12.05
Keynote lecture: Janusz FLIS (Poland
)
Measurement of the near-surface pH for evaluating the role
of nitrogen in anodic behaviour of plasma nitrided stainless
steel
12.05 – 12.40
Keynote lecture: Esah HAMZAH (Malaysia
)
Synthesis and characterization of microcapsules of zeolite,
polyaniline and zeolite/polyaniline composite as antifouling
coatings for corrosion control
12.40 – 13.00
Olayide ADETUNJI (Nigeria
)
Anti-corrosion property of potassium dichromate film on
galvanized coating in distilled water and sodium hydroxide
solution
Norhazilan MOHD NOOR (Malaysia
)
Comparison of human health and safety loss due to corroded
gas pipeline failure in rural and urban area: A case study of
Malaysia
13.00 – 13.20
Agnieszka KRÓLIKOWSKA (Poland
)
The corrosion of HDG zinc coatings on the road and urban
infrastructure
Libriati ZARDASTI (Malaysia
)
The consequence assessment of urban natural gas pipeline
failure due to corrosion
Keynote lecture: Mabruk SULEIMAN (UAE
)
Sulphur species corrosivity in refinery feed stock
Keynote lecture: Michael SCHORR (Mexico
)
Assesment of marine corrosion in the seas and coast of Mexico
13.20 – 13.40
13.40 – 14.00
14.00 – 15.00
15.00 – 21.00
Monica SALLAI (Germany
)
Thermally sprayed coatings as corrosion protection for steel
structures - influence of manufacturing processes on the
coatings quality
Mikolaj LUKASZEWICZ (UK
)
Novel concepts on the growth of corrosion fatigue small and
short cracks
Krzysztof ROKOSZ (Poland
)
Jerzy JEDLIŃSKI (Poland
)
XPS study of surface layer formed on AISI 316L after high- The oxidation behaviour of the pulse plasma sintered beta-NiAl
current density electropolishing
intermetallic compound at 1150°C
Lunch (Hall)
Excursion / Dinner
THURSDAY 20.11.2014
INVITED LECTURES (Room A)
Invited lecture:
9.00 – 9.40
Lucien VELEVA (Center for Research and Advanced Studies of NPI, Mexico
)
Initial steps of copper patina formation in Caribbean Sea water in the presence of diatoms
Invited lecture:
9.40 – 10.20
Artur ZIELIŃSKI (Gdansk University of Technology, Poland
)
Application of multi-frequency impedance microscopy to corrosion investigations
10.20 – 11.00
11.00 – 11.30
Günter SCHMITT (Institute for Maintenance and Corrosion Protection Technologies, Germany
Corrosion inhibitors and flow
Coffee Break (Hall)
SESSION 1 (Room C)
SESSION 2 (Room D)
)
11.30 – 12.05
Keynote lecture: Jaroslav SOJKA (Czech Republic
)
Hydrogen diffusion characteristics in the TRIP 800 C-Mn-Si
steel
Keynote lecture: Tadeusz ZAKROCZYMSKI (Poland
)
Self-activation of iron surface for hydrogen entry during a long
cathodic polarization in aqueous solutions
12.05 – 12.40
Keynote lecture: Yuanhua LIN (China
)
A study on the inhibition of J55 and P110SS steel in 3.5%
NaCl solution saturated with CO2 by seed extract of
Momordica charantia (Karela)
Keynote lecture: Nordin YAHAYA (Malaysia
)
Turbidity method to measure the growth of anaerobic bacteria
related to microbiologically influenced corrosion
12.40 – 13.00
Gaetano PALUMBO (Poland
)
Corrosion inhibition effect of guar gum on carbon steel
(K-55) in the simulated fracturing fluid under hydrodynamic
conditions
Rosilawati MOHD RASOL (Malaysia
)
Microbiologically induce corrosion monitoring using opencircuit potential (OCP) measurements
13.00 – 13.20
Alicja ŁUKASZCZYK (Poland
)
Influence of chromium content in low alloy constructional
steels on their electrochemical properties and corrosion
resistance in aqueous solutions
Monica De BARDI (Austria
)
Potash-lime-silica glass: corrosion mechanisms and protection
13.20 – 13.40
Vit KRIVY (Czech Republic
)
Experimental corrosion tests on weathering steel bridges
Małgorzata ZUBIELEWICZ (Poland
)
Application of research methods in expert's opinions
13.40 – 14.00
14.00 – 15.00
15.00 – 15.30
15.30 – 16.00
16.00 – 16.20
16.20 – 16.40
Almusaedi HAMEEDI (Ukraine
)
Atmospheric corrosion protection of metallic structures using
geocements-based coatings
Lunch (Hall)
Keynote lecture:
Keynote lecture: Christian SCHRADER (Germany
)
Iwona FLIS-KABULSKA (Poland
)
Physico-chemical conditioning of Al without wet chemical
Improvement of performance of nickel and nickel-iron cathodes
processing
for hydrogen evolution by low temperature plasma carburising
Keynote lecture:
Keynote lecture: Vincent VIGNAL (France
)
Influence of plastic deformation on the electrochemical
Urszula LELEK-BORKOWSKA (Poland
)
behaviour of AlMg2 and AlCu4Mg1 as-cast aluminium
Effect of water on anodic dissolution and passivation of nickel
alloys in NaCl solution
in methanolic solutions of electrolytes
Zbigniew SZKLARZ (Poland
)
The influence of crystallographic orientation of grains and
the plastic deformation on electrochemical behavior of pure
aluminum in sodium chloride solution
Angela CAPRÌ (Italy
)
Corrosion resistance of cerium based silane-zeolite coatings
on AA6061
Alicja STANKIEWICZ (Poland
)
Machine vision system for corrosion detection as an additional
tool beside EIS for protective properties of electrolessly
deposited Ni-P coatings evaluation
Artur JAROŃ (Poland
)
Nickel electrode precursor covered by Pt, Ni and Pt/Ni layers
using sol-gel method
16.40 – 17.00
17.00 – 17.30
Alba COVELO (Mexico
)
Corrosion behavior of hybrid sol-gel films reinforced with
electrospinning nanofibers
Coffee Break (Hall)
17.30 – 18.00
Keynote lecture: Jerzy SOBIECKI (Poland
)
Corrosion properties of plasma oxidized titanium nitride for
biomedical applications
Keynote lecture: Zbigniew GRZESIK (Poland
)
Nonstoichiometry and self-diffusion in Co3O4 cobalt oxide
18.00 – 18.20
Eliza DĂNĂILĂ (Romania
)
Corrosion-wear behavior of nanoporous oxide film formed
on Ti-6Al-4V alloy in physiological solution
Juho LEHMUSTO (Finland
)
The effect of pretreatment on the corrosion resistance of
superheater materials
18.20 – 18.40
Jing LIU (Canada
)
The effect of sodium chloride on the passive films of
titanium in sulfuric acids
Magdalena DUDEK (Poland
)
High temperature of coal corrosion in oxide fuel cells
18.40 – 19.00
19.00 – 21.00
Eddy BASUKI (Indonesia
)
Jingxin SUI (Finland
)
Oxidation behaviour of aluminide coated Ti-Al-Cr-Nb-Zr-Y The corrosion onset of Sanicro 28 steel in the presence of KCl,
alloys at high temperatures
NaCl and K2CO3 at high temperatures
Poster session 2 / Dinner (Hall)
YOUNG SESSION (Room C)
FRIDAY 21.11.2014
Polish Corrosion Society SESSION (Room D)
„ Meeting of Science and Industry”
(polish language
)
9.00 – 9.20
Kinga KAMIENIAK (Poland
)
The influence of reinforcement purity on corrosion resistance
of AM50/SiC composites
9.20 – 9.40
Ohad GAON (Israel
)
Corrosion investigation of MRI 153M magnesium alloy in
3% NaCl solution
9.40 – 10.00
Oleh TKACHUK (Ukraine
)
Corrosion behaviour of thermodiffusion coatings on titanium
implants in simulated body fluids
Małgorzata ZUBIELEWICZ (IMPiB, Oddz. Gliwice)
Kierunki rozwoju i oczekiwania przemysłu dotyczące farb
antykorozyjnych
10.00 – 10.20
Joanna LOCH (Poland
)
Corrosion behavior at the global and micro-scale of Ti6Al4V
and TiMo10Zr4 in Ringer solution
10.20 – 10.40
Jeremiasz KOPER (Poland
)
Effect of the high voltage anodic oxidation on the titanium
corrosion resistance
Leszek AUGUSTYNEK (International Paint sp.z o.o. )
Organizacje zajmujące się tematyką korozyjną w Polsce,
Europie i na Świecie
Łukasz AUGUSTYŃSKI (Instytut Badawczy Dróg i Mostów)
Podnoszenie świadomości korozyjnej na tle nieprawidłowości
w procesie antykorozyjnym
10.40 – 11.00
11.00 – 11.30
11.30 – 11.50
Marta ZWOLIŃSKA (Poland
)
Michał JACZEWSKI (Tikurrila Polska S.A.)
The influence of severe plastic deformation on the titanium
Skutki złych zabezpieczeń korozyjnych
corrosion resistance
Coffee Break (Hall)
Polish Corrosion Society SESSION (Room D)
„ Meeting of Science and Industry”
YOUNG SESSION (Room C)
(polish language
)
Klaudia RADOMSKA (Poland
)
The corrosion processes effect on surface roughness of bonded
magnetic material based on Nd-(Fe, Co)-B powder type
Wojciech SOKÓLSKI (SPZP “Corrpol” sp.z o.o.)
Certyfikacja personelu ochrony katodowej
11.50 – 12.10
Magdalena BISZTYGA (Poland
)
Cathodic properties of nickel in methanolic solution of
electrolytes
Piotr MILEWSKI (CEBAPO sp.z o o.)
Możliwość wykorzystania technologii natryskiwania
cieplnego do ochrony przed korozją stalowych i betonowych
elementów budowli hydrotechnicznych i przepraw
12.10 – 12.30
Martyna DYMEK (Poland
)
Hydrogenation and corrosion properties of LaNi4.5Co0.5based alloy doped with 1.7 at% Sn
Jacek ZASADA (Polskie Towarzystwo Cynkownicze)
Rynek cynkowniczy
12.30 – 12.50
Marcin KLEKOTKA (Poland
)
Fretting - corrosion of Co-Cr-Mo alloy in oral cavity
environment
12.50 – 13.10
13.10 – 13.30
13.30 – 14.00
14.00 – 15.00
Paweł PĘDRAK (Poland
)
The technology of TBC deposition by EB-PVD method
Aleksandra ŚWIERCZYŃSKA (Poland
)
The effect of pre-hydrogen charging on corrosion behaviour of
superduplex stainless steel welded joints
Closing Ceremony
Lunch (Hall)