TECHNICAL S P E C I F I C AT I O N Baxi-SenerTec UK 80,000 HOURS DACHS MINI-CHP CONTINUOUS RUN TIME PROVEN RELIABLE TECHNOLOGY EASY TO INSTALL SenerTec have installed over 32,000 Dachs units throughout Europe and have over 20 years’ experience in CHP technologies. Baxi-SenerTec UK are considered the leading authority for mini-CHP in the UK market. Feature Benefit Installed close to where the electricity and heat are to be used Electricity isn’t lost during transportation Easy to install Very little down time means it is more convenient for the end user Design life of 80,000 hours of continuous running Cost effective and reliable for its lifetime Internal combustion engine driving a maintenance free 3-phase asynchronous electrical generator Proven, long-lasting, reliable technology 750 litre buffer vessel for connecting 1-3 Dachs units For improved running and increased efficiency DachsPortal for remote monitoring of the system So you can plan maintenance and ensure optimum performance at all times 75O LITRE BUFFER VESSEL Dachs Mini-CHP Technical Data Condenser – Key Data Electrical output (3-phase) 5.5 kW Additional heat output: Thermal output without condenser 12.5 kW – at 60ºC return temp. 0.8 kW Thermal output with condenser (maximum) 15.5.kW – at 50ºC return temp. 0.9 kW Efficiency without condenser – gross (nett) 79% (88%) – at 35ºC return temp. 2.3 kW 92% (102%) – at 20ºC return temp. 3.0 kW Max. efficiency with condenser – gross (nett) Height (to top of casing) 1000 mm Width (excl. MSR2 controller) Depth Height 1750 mm 720 mm Width 400 mm 1060 mm Depth 300 mm Delivered weight 530 kg Top clearance required Standard safety valve 2.5 bar Weight Max. working pressure (4.5 bar SV reqd.) 5.0 bar Max. hydraulic W.P. Gas supply pressure 20 mbar Natural gas input (22.8 kW) 2.13 m /h 3 Plant room air inlet Noise emission (at 1 metre from casing) 150cm Exhaust gas outlet (plastic) Condensate drain 25 kg 5.0 bar ½” DN80 25 mm 52-56 dBA High limit safety ‘stat (STL) 110ºC 3,500 hrs Heating inlet temp. (return) 10ºC – 70ºC Service intervals Designed service life 2 Heating F&R connections 1000 mm 80,000 hrs Heating F&R connections (flexibles supplied) 1” Gas connection (flexible supplied) ½” Non-condensing exhaust (steel pipe not supplied) 1” Condenser exhaust (plastic flue available) DN80 Heating flow temperature 80ºC Max. heating return temperature (to allow CHP to operate) 70ºC Electrical connections: – 3-phase supply onto 20A type ‘C’ circuit breakers 2.5 mm – equipotential bonding to main earth 10 mm BMS control connections: – Volt free enable – 230 volt remote fault indication – 230 volt remote service due indication Modem connection – optional analogue, GSM or ethernet SE Buffer Vessel – Key Data Capacity 750 litres Height (with insulation) 1920 mm Diameter (excluding insulation) 750 mm Diameter (with insulation) 950 mm Insulation 100 mm Weight (excluding insulation) 140 kg Max. hydraulic W.P. 3.0 bar Heating F&R connections to DACHS 1” F&R connections to heating system 1½” Heating flow temperature 80ºC Max. heating return temp. 70ºC DACHS MINI-CHP | T E C H N I C A L S P E C I F I C A T I O N Space Requirements 3020 720 600 950 ≥150 1060 600 2010 1050 ≥150 350 600 Typical Hydraulic Arrangement 80oC Multi-module Dachs c/w condensers (base heat load) SE buffer 750 litres Boilers (peak load) <70oC Heating circuits DACHS MINI-CHP | T E C H N I C A L S P E C I F I C A T I O N Dachs Mini-CHP Buffer Vessel - SE 750 0845 0701055 baxi-senertec.co.uk
© Copyright 2024