1. No category

DATA SHEET
3805i/e Indoor Access Point
ENTERPRISE-GRADE PERFORMANCE AND SECURITY WITHOUT THE PREMIUM COST
BENEFITS
Business Alignment
• Support for demanding
voice/ video/data applications
to enhance mobile worker
productivity and convenience
• Role-based grouping of users,
devices, and applications
to deliver priority, QoS, and
security in accordance with
business needs
• Seamless roaming across
an entire multi-subnet
campus without the need for
cumbersome client software
• Integrated management, security,
and QoS features reduce
operating cost and ensure a
consistent user experience
regardless of location
Operational Efficiency
• Centralized visibility and control
from NetSight ™ accelerates
problem resolution, optimize
network utilization, and automate
management
Product Overview
The AP3805 is a feature rich 802.11ac and 802.11abgn indoor access point that
delivers enterprise-grade performance & security without the premium cost.
Designed to blend into the office, classroom or hotel environment, the AP3805 is
ideal for providing secure 802.11ac and 802.11abgn connectivity for medium-density
environments such as schools, hotels and conference centers.
The AP3805i comes with an integrated four antenna array for ease of installation.
The AP3805e requires professional installation and includes four RP-SMA
antenna connectors supporting both 2.4GHz and 5GHz band antennas. AP3805
uses 802.3af Power over Ethernet (PoE) without reducing its performance nor
degrading its enterprise-grade capabilities. An optional external power supply is
available for deployments that do not support Power over Ethernet.
The AP3805 is built on the latest Wi-Fi technology including 802.11ac, dynamic
radio management, and spectrum analysis with interference classification, beam
forming, self-forming and self-healing meshing, security, role-based authentication,
authorization, and access control. The 2x2:2 platform is capable of delivering up to
• Adaptive architecture reduces
complexity and optimizes
information flow for
each application
1.17Gbps over-the-air-performance and up to 40,000 packets per second on the
• Dynamic Radio Management
when used for planning and
monitoring ensures optimal
spectrum coverage resulting in
the best end-user quality
of experience
capacity need.
wire port. The AP3805 comes with brackets to be installed on to most drop ceiling
& wall mounts. Multiple antenna offerings (e.g., omni, sector, and panel) ensure
that the AP3805e deployment can be optimized to meet any unique coverage or
• Flexible Client Access optimizes
throughput for 802.11ac/n clients
in today’s mixed ac, n, and a/b/g
client environments
3805i/e Indoor Access Point – Data Sheet
1
Specifications
Security
• Authentication and authorization
functions include role-based
access control (using 802.1X,
MAC, and captive portal) and
authentication at the AP
• Wireless Intrusion Prevention
(WIPS) functions provide
continuous scanning, threat
classification, rogue AP detection,
and countermeasures against
possible attacks
PRODUCT FEATURES
AP3805I/E
GENERAL
High performance enterprise class AP
ü
Number of radios
2
MIMO implementation for high performance
11ac & 11n throughputs
Number of spatial streams
2
Maximum Throughput 2.4GHz Radio
300Mbps
Maximum Throughput 5GHz Radio
867Mbps
Maximum Throughput per AP
1.17Gbps
RFC2285 Wire/Wireless Forwarding Rate
• Integration of security policies
(NAC, IPS) across the wired/
wireless networks enables quick
diagnosing and resolution of
security threats
• Integration of Policy Manager
across the wired/wireless
networks dynamically oversees
user access at the wireless
network point of entry
Support and Service
• Industry-leading customer
satisfaction and first call resolution
rates
2x2
Number of SSIDs supported per radio/total
Simultaneous users per radio/total
40,000 packets per second
8 / 16
127 / 254
Simultaneous Voice calls(802.11b, G711, R>80)
Mode of operation
12 or greater
Semi-autonomous
Plug and play operation/Zero touch deployment
ü
WPA, WPA2 (AES), 802.11i, 802.1x, IPSec, IKEv2,
PKCS #10, X509 DER / PKCS #12
Security and Standards
MULTIPLE OPERATING MODES
Encryption, Security, QoS and RF management
done on AP
Intelligent thin AP
Distributed and centralized data paths within
same SSID
ü
Application based distributed and centralized
data paths within same user/device session
ü
Simultaneous RF monitoring and client services
ü
• Lifetime warranty for indoor
access points
In-channel WIDS
ü
In-channel WIPS
ü
• Personalized services, including
site surveys, network design,
installation, and training
Dedicated multi-channel WIDS (Guardian
mode)
ü
Dedicated multi-channel WIPS (Guardian mode)
ü
Dedicated multi-channel RF spectrum analysis
and fingerprinting
ü
Locates devices and threats via RF triangulation
ü
Self-forming and self-healing meshing
ü
Remote access point
ü
Hardware-based, end-to-end data and control
plane encryption
ü
Private and public cloud deployments
ü
HYBRID OPERATION
Security scanning and serve clients on same
radio
ü
Security scanning and spectrum analysis on
same radio
ü
Spectrum analysis and serve clients on same
radio
ü
Multi-channel dedicated security scanning and
spectrum analysis
ü
RADIO CHARACTERISTICS
MAX RADIATED POWER
Radio 1 (5GHz)
26 dBm*
Radio 2 (2.4GHz)
25 dBm*
* Actual available power would vary based on local regulatory requirement and actual channels used for operation
3805i/e Indoor Access Point – Data Sheet
2
MAX ANTENNA GAIN (INTEGRATED ANTENNA)
Radio 1 (5GHz)
5 dBi (AP3805i)
Radio 2 (2.4GHz)
3 dBi (AP3805i)
ADAPTIVE RADIO MANAGEMENT
Dynamic Channel Control
802.11h: DFS & TPC support (ETSI)
Efficient use of the spectrum with a multi-channel architecture
ü
Automatic transmit power and channel control
ü
Self-healing with coverage gap detection
ü
Band steering with multiple steering modes
ü
Spectrum load balancing of clients
ü
Airtime fairness
ü
Performance protection in congested RF environments
ü
Mitigates co-channel interference with coordinated access
ü
Mitigates adjacent channel interference with optimized receive
sensitivity
ü
Efficient reuse of channels at shorter intervals
ü
Mitigates non 802.11 interference without dedicated radios
ü
QOS FOR APPLICATIONS
Quality of Service (WMM, 802.11e)
ü
Power Save (U-APSD)
ü
Fast secure roaming and handover between APs
ü
Pre-Authentication (Pre-Auth)
ü
Opportunistic Key Caching (OKC)
ü
Bonjour/LLMNR/UPnP identification, containment and control
ü
Supports voice, video and data using the same SSID
ü
Prioritizes voice over data for both tagged and untagged traffic
ü
Rate limiting (rule and user-based)
ü
Rule and role based QoS processing
ü
MULTICAST RATE CONTROL
Multicast to unicast Conversion
ü
Adaptable rate multicast
ü
Power save mode optimization for multicast
ü
WIRELESS SERVICES
Media Access Protocol
Data Rates
CSMA/CA with ACK
802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b: 1, 2, 5.5, 11 Mbps
802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps
802.11n: See 802.11n Performance Table below
802.11ac: See 802.11ac Performance Table below
Receiver Sensitivity
802.11a:
• -92DdBm @ 6Mbps
• -77DdBm @ 54Mbps
802.11g:
• -91DdBm @ 6Mbps
• -78DdBm @ 54Mbps
802.11n: See 802.11n Receiver Sensitivity Table below
802.11ac: See 802.11ac Receiver Sensitivity Table below
Frequency Bands
802.11ac/a/n:
• 5.15 to 5.25 GHz (FCC/IC/ETSI)
• 5.25 to 5.35 GHz (FCC/IC/ETSI)*
• 5.47 to 5.725 GHz (FCC/IC/ETSI)*
• 5.725 to 5.850 GHz (FCC/IC)
802.11b/g/n:
• 2.400 to 2.4720 GHz (FCC/IC)
• 2.400 to 2.4835 GHz (ETSI)
*FCC/IC DFS certification in progress
3805i/e Indoor Access Point – Data Sheet
3
Wireless Modulation
802.11ac: BPSK, QPSK, 16QAM, 64QAM, 256QAM with OFDM
802.11ac Packet aggregation: A-MPDU, A-MSDU 802.11ac Very High-Throughput (VHT):
VHT20/40/80
802.11ac Advanced Features: LDPC, STBC, Maximum Likelihood (ML) Detection 802.11n: BPSK,
QPSK, 16QAM, 64QAM with OFDM
802.11n High-throughput (HT) support: HT 20/40 802.11n Packet aggregation: A-MPDU, A-MSDU
802.11n Advanced Features: LDPC, STBC and TxBF
802.11a: BPSK, QPSK, 16QAM, 64QAM with OFDM
802.11g: DSSS and OFDM
802.11b: DSSS
INTERFACES
# 10/100/1000 Base T Ethernet autosensing link
1
MOUNTING
Wall mounting (included)
ü
Flush & Protruded drop-ceiling mounting bracket (9/16” & 15/16”
flat T-bar included)
ü
ENVIRONMENTAL
Environmental
Plenum rated (UL 2043)
Operating:
Temperature 0° C to +45° C (+32° F to +113° F)
Humidity 0%-95% (noncondensing)
Storage:
Temperature -50° C to +70° C (-58° F to +158° F)
Transportation:
Temperature -50° C to +70° C (-58° F to +158° F)
WIRELESS AND EMC
Compliance
•FCC CFR 47 Part 15, Class B
•ICES-003 Class B
•FCC Subpart C 15.247
•FCC Subpart E 15.407
•RSS-210
•EN 301 893
•EN 300 328
•EN 301 489 1 & 17
•EN 62311
•EN 55022 (CISPR 22)
•EN 60601-1-2
•AS/NZS4268 + CISPR22
Safety
•IEC 60950-1
•EN 60950-1
•UL 60950-1
•CSA 22.2 No.60950-1-03
•AS/NZS 60950.1
MECHANICAL
Dimensions (Outer Diameter x Height)
6.18” x 1.63” - AP3805i
6.71” x 2.03” - AP3805e
Weight
0.75 lbs (0.34 kg) – AP3805i
0.84 lbs (0.38 kg) – AP3805e
Max power consumption
9.6W
Warranty
Lifetime
3805i/e Indoor Access Point – Data Sheet
4
Ordering Information
PART NUMBER
DESCRIPTION
ACCESS POINTS
WS-AP3805i
Dual Radio 802.11ac/abgn, 2x2:2 MIMO indoor access point with four internal antenna
array (Requires V9.15 or higher)
WS-AP3805e
Dual Radio 802.11ac/abgn, 2x2:2 MIMO indoor access point with four reverse polarity
SMA connectors for external antenna array (Requires V9.15 or higher, and antennas
must be ordered separately)
ANTENNAS (REQUIRED FOR AP3805E)
WS-ANT-2DIP-2
2.4GHz Indoor Dipole Antenna for 3805e only (2 pack)
WS-ANT-5DIP-2
5GHz Indoor Dipole Antenna for 3805e only (2 pack)
WS-AI-DD05120
Indoor, 2.4GHz/5GHz, Dual-feed, 5/5 dBi, 120 deg, Sector antenna
WS-AI-DQ04360
Indoor, 2.4GHz/5GHz, Quad-feed, 4/4 dBi, Omni
ACCESSORIES
WS-MBI-DCU01
Universal Mounting brackets for drop ceiling rails
WS-PSI12V-MR1
Multi-region 12V Indoor External Power Supply for the AP3805i/e
MID-SPAN POE DEVICES
PD-3501G-ENT
Single port, 1 Gigabit 802.3af PoE Midspan
Warranty
Service & Support
As a customer-centric company, Extreme Networks is committed
Extreme Networks provides comprehensive service offerings
to providing quality products and solutions. In the event that
that range from Professional Services to design, deploy and
one of our products fails due to a defect, we have developed a
optimization of customer networks, customized technical training,
comprehensive warranty that protects you and provides a simple
to service and support tailored to individual customer needs.
way to get your products repaired or media replaced as soon
Please contact your Extreme Networks account executive for
as possible. For full warranty terms and conditions please go to:
http://support.extremenetworks.com/.
more information about Extreme Networks Service and Support.
http://www.extremenetworks.com/contact
Phone +1-408-579-2800
©2014 Extreme Networks, Inc. All rights reserved. Extreme Networks and the Extreme Networks logo are trademarks or registered trademarks of Extreme Networks, Inc.
in the United States and/or other countries. All other names are the property of their respective owners. For additional information on Extreme Networks Trademarks
please see http://www.extremenetworks.com/company/legal/trademarks/. Specifications and product availability are subject to change without notice. 8926-1014
WWW.EXTREMENETWORKS.COM
3805i/e Indoor Access Point – Data Sheet
5