StarTec Door Furniture Stainless Steel Grade 304 Lever Handles For these StarTec lever handles: Tested to 200,000 cycles durability and to BS EN 1906: 2010 10 year guarantee. BS EN 1906 4 7 - 1 1 3 0 B Suitable for use on 30 minute timber fire door sets to EN 1634-2 2 38 For all StarTec lever handles: Drill two holes Ø 8 mm at 38 mm centres, to a minimum depth of 8 mm, and one Ø 22 mm hole to a depth of 2 mm Ø8 Ø 22 Ø8 Min. depth 8 Escutcheons and WC sets to suit these StarTec lever handles are shown on page 23 Ø 52 Ø7 7 8.5 61.5 Fixings Finish Satin stainless steel 140 Cat. No. 902.20.216 TCH 2013, © Häfele U.K. Ltd 2013. Dimensional data not binding. We reserve the right to alter specifications without notice. Order qty: 1 set Backplates for Euro profile cylinder lock Backplates with WC release and inside turn for bathroom lock X X 72 46 78 StarTec CHASE shaped lever handles Ø7 8 • Pair of lever handles on backplates • Grub screw fixing on 8 mm high-grade alloy steel spindle • Sprung, for use with standard duty followers • To suit doors up to 38-47 mm thick • 304 satin stainless steel 7.8 21.5 61.5 220 Architectural Ironmongery: Door Furniture • Pair of lever handles and roses • Grub screw fixing on 8 mm high-grade alloy steel spindle • Sprung, for use with standard duty followers • To suit doors up to 36-45 mm thick • 304 stainless steel 38 Backplates for latch 5 StarTec CHASE shaped lever handles 107.5 140 Fixings 40 Backplates For latch For profile cylinder lock For bathroom lock Cat. No. 902.90.246 902.92.246 902.94.246 Order qty: 1 set PAGE AMENDED - 22.08.14/1 [email protected] www.hafele.co.uk 0800 171 2909 Page Section 5 21