CAUTION • Only use the pusher when pushing ingredients in. • Do not adjust the lever during operation. MANUAL • While operating, do not try to pull ingredients out with fingers, utensils, etc. MINCER • Hard vegetables or fruits like carrots should be cut into small pieces and fed slowly. FROZEN DESSERT MAKER FOOD PROCESSOR • Seeds should be removed from ingredients like apples or lemons before inserting. Enhance your cooking variety with the Kuvings Multi purpose Mincer! • Hard ingredients like nuts and seeds should be avoided as they can cause damage. • Grains like rice, beans, etc. should be boiled or soaked overnight before use to prevent damage. • Leafy greens are not suitable. • Ice should not exceed 1 ½ inch cube size. • Frozen fruits must be thawed before use (5 minutes minimum). Product + Mincer + MM1.ⓖ.1-130605M This product is an attachment that works with Kuvings Silent Juicer’s base. MANUAL Dissemble is opposite of Assemble STEP 1 STEP 2 ▶ Insert the juicing screw into the work bowl and close the lid. Lid ▶ Attach the Mincer onto the base 1. Insert and push down the juicing screw into the work bowl MINCER 2. Align the dots ●on the lid and the work bowl. While the dots ●are aligned, Juicing Screw place the lid on the work *same part from bowl to combine the parts. Silent juicer Work Bowl 3. After the lid has been correctly placed on the work bowl, twist the lid clockwise until it locks onto the work bowl. (Align symbol with●symbol) Base 1. Place the assembled attachment on the base ensuring the down arrow ▼fon the lid is aligned with the up arrow △ on the base. 2. Turn clockwise aligning the down arrow ▼ on the lid‫⯹݌‬ with ᩕฝ the up arrow ▲ on the base. ▼ ‫⯹݌‬ ᩕฝ STEP 3 Switch the lever side to side to adjust for different ingredients. Lever 1. Place the lever in between position 1 and 2 to be vertically upright. 2. Slide the lever unit down by pressing from the top, and then, remove the lever unit by pushing inwards. Tip | • The lever unit can be disassembled for cleaning. • After washing, please dry the lever before reassembly. • Before using, make sure the lever is in the 1 or 2 position (depending on the ingredients used). Lever Position 1 Chopping into small pieces Lever Position 2 Chopping into bigger pieces (Moist ingredients) Disassembling the lever unit: ‫⯹݌‬ ᩕฝ