Further development of the exchange- series MA 21xx and MA 32xx

Test Probes · Test Fixtures
Further development of the exchangeable kits for the manual test fixture
series MA 21xx and MA 32xx
Dear INGUN customer
As an innovative company, we aim to continually improve our product portfolio to meet the
everchanging market requirements. Therefore, we ensure the high performance ability and the
high quality standard of our products through innovative advancement.
It is important to us that you as a longstanding business partner are informed about the improved performance characteristics of our exchangeable kits for the manual test fixtures series
MA 21xx and MA 32xx.
We paid particular attention to an even more stable and stiffer design and further improved
handling. Of course, you can use the new exchangeable kits in your existing basic units.
Further benefits, in detail, are:
 a more deflection resistant probe plate made of FR4
 strengthened pressure springs suitable for dual stage fixtures, which are safeguarded against loosening by means of a counter-bore
 a pressure plate which can be demounted without the use of any tools
 an in-series equipped, additional stiffener bar on the internal interface, for a secure signal transfer
 ESD-resistant and rear-elongated side plates in the exchangeable kits with internal interface for a more secure alignment in the basic unit
 an ESD-resistant wiring protection plate
 an in series equipped, discharge probe to ESD-ground the pressure plate
 stacking screws, to build one exchangeable kit with protected probe filed, with their own holder for storage
 a newly-positioned handle on the pressure frame plate, to allow freely positioned stiffener bars
 and much more
As usual, you receive the exchangeable kits completely demounted. This enables easy and
immediate customisation. Should you still prefer to receive the exchangeable kits in a mounted
state, this is possible upon specific request.
Page 1/2
Test Probes · Test Fixtures
Further development of the exchangeable kits for the manual test fixture
series MA 21xx and MA 32xx
exchangeable kits without
internal interface
exchangeable kits with
internal interface
Please note that our new exchangeable kits replace our existing exchangeable kits. In order to
provide more comprehensive information, we have compiled an overview of the old and new part
numbers and descriptions.
Standard version
ATS MA2109/S-5
ATS MA09/S-5
Part 34140-KIT
Part 45990-KIT
ATS MA2111/S-5
ATS MA11/S-5
Part 32450-KIT
Part 45898-KIT
will be
ATS MA2112/S-7
ATS MA12/S-7
replaced
Part 32340-KIT
Part 45903-KIT
with
ATS MA2113/S-10
ATS MA13/S-10
Part 31440-KIT
Part 45908-KIT
ATS MA2114/S-10
ATS MA14/S-10
Part 34490-KIT
Part 45983-KIT
ATS MA2009
ATS MA09
Part 34270-KIT
Part 45994-KIT
ATS MA2011
ATS MA11
Part 31750-KIT
Part 45900-KIT
will be
ATS MA2012
ATS MA12
replaced
Part 32330-KIT
Part 45904-KIT
with
ATS MA2013
ATS MA13
Part 32605-KIT
Part 45980-KIT
ATS MA2014
ATS MA14
Part 34345-KIT
Part 45985-KIT
ESD version
ATS MA2109/S-5/ESD
ATS MA09/S-5/ESD
Part 38830-KIT
Part 46233-KIT
ATS MA2111/S-5/ESD
ATS MA11/S-5/ESD
Part 38832-KIT
Part 46026-KIT
will be
ATS MA2112/S-7/ESD
ATS MA12/S-7/ESD
replaced
Part 34850-KIT
Part 46236-KIT
with
ATS MA2113/S-10/ESD
ATS MA13/S-10/ESD
Part 38835-KIT
Part 46239-KIT
ATS MA2114/S-10/ESD
ATS MA14/S-10/ESD
Part 38931-KIT
Part 46242-KIT
ATS MA2009/ESD
ATS MA09/ESD
Part 37645-KIT
Part 46245-KIT
ATS MA2011/ESD
ATS MA11/ESD
Part 37641-KIT
Part 46248-KIT
will be
ATS MA2012/ESD
ATS MA12/ESD
replaced
Part 34495-KIT
Part 46250-KIT
with
ATS MA2013/ESD
ATS MA13/ESD
Part 38667-KIT
Part 46254-KIT
ATS MA2014/ESD
ATS MA14/ESD
Part 38930-KIT
Part 46257-KIT
Should you have any further questions then your specific contact person is available at any time.
This statement was genereted electronically and is valid without a signature.
With best regards
INGUN Prüfmittelbau GmbH
Sigfrid NagelChristian Renner
Head of Sales D-CH-Benelux
Product Manager Test Fixtures
Version: October 2014
Page 2/2