Further development of the exchange- series MA 21xx and MA 32xx
Test Probes · Test Fixtures Further development of the exchangeable kits for the manual test fixture series MA 21xx and MA 32xx Dear INGUN customer As an innovative company, we aim to continually improve our product portfolio to meet the everchanging market requirements. Therefore, we ensure the high performance ability and the high quality standard of our products through innovative advancement. It is important to us that you as a longstanding business partner are informed about the improved performance characteristics of our exchangeable kits for the manual test fixtures series MA 21xx and MA 32xx. We paid particular attention to an even more stable and stiffer design and further improved handling. Of course, you can use the new exchangeable kits in your existing basic units. Further benefits, in detail, are: a more deflection resistant probe plate made of FR4 strengthened pressure springs suitable for dual stage fixtures, which are safeguarded against loosening by means of a counter-bore a pressure plate which can be demounted without the use of any tools an in-series equipped, additional stiffener bar on the internal interface, for a secure signal transfer ESD-resistant and rear-elongated side plates in the exchangeable kits with internal interface for a more secure alignment in the basic unit an ESD-resistant wiring protection plate an in series equipped, discharge probe to ESD-ground the pressure plate stacking screws, to build one exchangeable kit with protected probe filed, with their own holder for storage a newly-positioned handle on the pressure frame plate, to allow freely positioned stiffener bars and much more As usual, you receive the exchangeable kits completely demounted. This enables easy and immediate customisation. Should you still prefer to receive the exchangeable kits in a mounted state, this is possible upon specific request. Page 1/2 Test Probes · Test Fixtures Further development of the exchangeable kits for the manual test fixture series MA 21xx and MA 32xx exchangeable kits without internal interface exchangeable kits with internal interface Please note that our new exchangeable kits replace our existing exchangeable kits. In order to provide more comprehensive information, we have compiled an overview of the old and new part numbers and descriptions. Standard version ATS MA2109/S-5 ATS MA09/S-5 Part 34140-KIT Part 45990-KIT ATS MA2111/S-5 ATS MA11/S-5 Part 32450-KIT Part 45898-KIT will be ATS MA2112/S-7 ATS MA12/S-7 replaced Part 32340-KIT Part 45903-KIT with ATS MA2113/S-10 ATS MA13/S-10 Part 31440-KIT Part 45908-KIT ATS MA2114/S-10 ATS MA14/S-10 Part 34490-KIT Part 45983-KIT ATS MA2009 ATS MA09 Part 34270-KIT Part 45994-KIT ATS MA2011 ATS MA11 Part 31750-KIT Part 45900-KIT will be ATS MA2012 ATS MA12 replaced Part 32330-KIT Part 45904-KIT with ATS MA2013 ATS MA13 Part 32605-KIT Part 45980-KIT ATS MA2014 ATS MA14 Part 34345-KIT Part 45985-KIT ESD version ATS MA2109/S-5/ESD ATS MA09/S-5/ESD Part 38830-KIT Part 46233-KIT ATS MA2111/S-5/ESD ATS MA11/S-5/ESD Part 38832-KIT Part 46026-KIT will be ATS MA2112/S-7/ESD ATS MA12/S-7/ESD replaced Part 34850-KIT Part 46236-KIT with ATS MA2113/S-10/ESD ATS MA13/S-10/ESD Part 38835-KIT Part 46239-KIT ATS MA2114/S-10/ESD ATS MA14/S-10/ESD Part 38931-KIT Part 46242-KIT ATS MA2009/ESD ATS MA09/ESD Part 37645-KIT Part 46245-KIT ATS MA2011/ESD ATS MA11/ESD Part 37641-KIT Part 46248-KIT will be ATS MA2012/ESD ATS MA12/ESD replaced Part 34495-KIT Part 46250-KIT with ATS MA2013/ESD ATS MA13/ESD Part 38667-KIT Part 46254-KIT ATS MA2014/ESD ATS MA14/ESD Part 38930-KIT Part 46257-KIT Should you have any further questions then your specific contact person is available at any time. This statement was genereted electronically and is valid without a signature. With best regards INGUN Prüfmittelbau GmbH Sigfrid NagelChristian Renner Head of Sales D-CH-Benelux Product Manager Test Fixtures Version: October 2014 Page 2/2
© Copyright 2024