1. No category

Stock list: 28.10.2014
BIRKEGÅRDSVEJ 2
|
7400 HERNING
|
TLF. +45 9711 9222
www.sandfeld.com
All prices are ex. works.
|
FAX +45 9711 9966
1016076 Used Arboga drilling machine - MT 3.
Type: A3008. Morse taper: 3. Rpm.: 75-3010. Table size: 500 x 400
mm. Automatic feed: yes. Throat: 310 mm. Drilling capacity: Ø30 mm.
Drilling depth: 150 mm. Country of origin: Sweden. Year: 1996.
1016017 Used Arsenal pillar drilling machine - MT 4.
Type: HU 031. Morse taper: 4. Rpm.: 85-1500. Table size: 400 x 400
mm. Automatic feed: yes. Throat: 320 mm. Motor: 2,2 kW. Drilling
capacity: 40 mm. Drilling depth: 250 mm. Country of origin: Bulgaria.
Size (L x W x H): 2470 x 985 x 590 mm. Weight: 740 Kg. Year: 2000.
1015758 Used Clou gang drilling machine - MT 2 (2 units).
Type: 10B/13B. Morse taper: mk 2. Rpm.: 500-2800/250-4100. Throat:
180 MM. Drilling capacity: Ø10/Ø13 mm. Drilling depth: 70 MM.
Country of origin: Denamrk. With drill chucks. Sold as is.
1012125 New CMA NC bed-type drilling machine.
Type: TRD. Morse taper: ISO 40. Automatic feed: Variable. Cross
movement: 650 mm. Length movement: 1500/3000/4500/6000/7500/9000
mm. Vertical movement: 400 mm. Drilling capacity: Ø25/Ø40 mm.
control: NC. Country of origin: Spain.
1011324 New CMA NC gantry drilling machine - ISO 40.
Type: GRD. Morse taper: ISO 40. Automatic feed: Variable. Cross
movement: 1200/1800 mm. Length movement: 3000/4500/6000 mm.
Vertical movement: 500 mm. Drilling capacity: Ø25/Ø40 mm. control:
NC. Country of origin: Spain.
1015465 New Erlo pillar drilling machine - MT 3.
Type: G32. Morse taper: 3. Rpm.: 65-3060. Table size: 300 x 270 mm.
Automatic feed: no. Throat: 250 mm. Drilling capacity: 32 mm. Drilling
depth: 120 mm. Country of origin: Spain. Size (L x W x H): 640 x 500 x
2020 mm. Weight: 260 Kg.
1015466 New Erlo pillar drilling machine - MT 3.
Type: GPR 32. Morse taper: 3. Rpm.: 65-3060. Table size: 300 x 270
mm. Automatic feed: yes. Throat: 250 mm. Drilling capacity: 32 mm.
Drilling depth: 120 mm. Country of origin: Spain. Size (L x W x H): 640
x 500 x 2070 mm. Weight: 260 Kg.
1015467 New Erlo pillar drilling machine - MT 4.
Type: GPR 40. Morse taper: 4. Rpm.: 75-2100. Table size: 400 x 420
mm. Automatic feed: yes. Throat: 300 mm. Drilling capacity: 40 mm.
Drilling depth: 160 mm. Country of origin: Spain. Size (L x W x H): 705
x 500 x 2250 mm. Weight: 305 Kg.
1015468 New Erlo pillar drilling machine - Mk 4.
Type: GPR 50. Morse taper: 4. Rpm.: 93-1420. Table size: 480 x 480
mm. Automatic feed: yes. Throat: 350 mm. Drilling capacity: 50 mm.
Drilling depth: 180 mm. Country of origin: Spain. Size (L x W x H): 820
x 600 x 2295 mm. Weight: 435 Kg.
1013904 New Erlo drilling machine - MT 4.
Type: TSAR 32. Morse taper: 4. Rpm.: 75-2100. Table size: 400 x 420
mm. Automatic feed: Yes. Throat: 300 mm. Motor: 1/1,5 HP. Drilling
capacity: 32 mm. (st. 70 kg./mm2) Country of origin: Spain. Size (L x W
x H): 420 x 655 x 2233 mm.
1012896 New Erlo drilling machine - MT 4.
Type: TSAR 40. Morse taper: 4. Rpm.: 93-1420. Table size: 480 x 480
mm. Automatic feed: yes. Throat: 350 mm. Motor: 2 HP. Drilling
capacity: 40 mm. (st. 70 kg./mm2) Country of origin: Spain.
1010469 New Erlo pillar drilling machine - MT 4.
Type: TCA 40. Morse taper: 4. Rpm.: 68-1270. Table size: 480 x 560
mm. Automatic feed: yes. Throat: 360 mm. Drilling capacity: 40 mm.
(st. 70 kg./mm2) Country of origin: Spain. Size (L x W x H): 950 x 550 x
2363 mm.
1013513 Used Famup column drilling machine - MT 4.
Type: TCO 40 TR VS DA. Morse taper: 4. Rpm.: 100-1650. Automatic
feed: yes. Throat: 290 mm. Drilling capacity: Ø40 mm. Country of
origin: Italy.
1016061 Used Himount drilling machine - MT 2.
Type: TRU K-1605FVC. Morse taper: 2. Rpm.: 350-2100. Table size:
280 x 280 mm. Throat: 180 mm. Drilling capacity: Ø16 mm. Drilling
depth: 70 mm. Year: 1998. With variable speed.
1015608 Used Ibarmia CNC drilling center - ISO 40.
Type: DP70/800. Morse taper: ISO 40. Rpm.: 97-2400. Table size:
Ø600 mm. Automatic feed: yes. Throat: 525 mm. Drilling capacity: Ø70
mm. Drilling depth: 260 mm. control: Fagor 102 S. Country of origin:
Spain. Size (L x W x H): 2600 x 1200 x 2400 mm. Weight: 3600 kg.
Year: 1999. Max Work piece: Ø800 mm. With digital readout on table,
varible speed, 4-jaw selfcentering chuck and chip conveyer.
1015204 Demo Ibarmia drilling machine - MT 3.
Type: TL 25-MG. Morse taper: 3. Rpm.: 75-2800. Table size: 300 x 270
mm. Throat: 250 mm. Drilling capacity: Ø25 mm. (st. 60 kg./mm2)
Drilling depth: 120 mm. Country of origin: Spain. Weight: 185 kg. Year:
2006.
1015859 Used MAS radial drill - MT 6.
Type: VO 63. Morse taper: 6. Rpm.: 11,2-2000. Table size: 1010 x 750
mm. Automatic feed: yes. Throat: 1550 mm. Drilling depth: 380 mm.
Country of origin: Czech Republic. Weight: 7.500 kg.
1015198 Used Modig radial drill - MT 3.
Type: RBM 28 B. Morse taper: 3. Rpm.: 100-1280. Table size: 445 x
445 mm. Automatic feed: yes. Throat: 700 mm. Country of origin:
Sweden. Motorized up/down movement of arm. Varible speed.
1014378 New Nider drilling machine - MT 3.
Type: NI-25. Morse taper: MK 3. Rpm.: 105-2900. Table size: 500 x 350
mm. Throat: 255 mm. Drilling capacity: Ø25 mm. Drilling depth: 135
mm.
1015505 Used Ooya radial drill - MT 5.
Type: RE2-1300A. Morse taper: 5. Rpm.: 32-1985. Automatic feed:
yes. Throat: 1300 mm. With 1800 x 1000 mm. table.
1015600 Used Serrmac drilling machine - MT 4.
Type: TCO 40. Morse taper: 4. Rpm.: 50-1300. Table size: 630 x 250
mm. Automatic feed: yes. Throat: 350 mm. Drilling capacity: Ø40 mm.
Country of origin: Italy. Year: 1995. With 630 x 250 mm cross table.
1015606 Used Stanko radial drill - MT 5.
Type: 2M55. Morse taper: 5. Rpm.: 20-2000. Automatic feed: yes.
Throat: 1500 mm. Drilling depth: 400 mm. Country of origin: Russia.
With 800 x 600 mm. box table.
1015469 New Strands pillar drilling machine - MT 3.
Type: S25. Morse taper: 3. Rpm.: 105-2900. Table size: 350 x 500
mm. Throat: 255 mm. Motor: 0,65/0,9 kW. Drilling capacity: 25 mm.
Drilling depth: 135 mm. Country of origin: Sweden. Weight: 190 Kg. 5
year warranty on the gearbox. Can be supplied with automatic feed.
1015470 New Strands pillar drilling machine - MT 3.
Type: S28. Morse taper: 3. Rpm.: 75-3010. Table size: 400 x 500 mm.
Throat: 320 mm. Motor: 0,9/1,2 kW. Drilling capacity: Ø30 mm. Drilling
depth: 150 mm. Country of origin: Sweden. Weight: 245 Kg. 5 year
warranty on the gearbox. Can be supplied with automatic feed.
1015821 Used Strands drilling machine - MT 3.
Type: S32ME. Morse taper: 3. Rpm.: 75-3010. Table size: Ø350 mm.
Automatic feed: yes. Throat: 320 mm. Drilling depth: 130 mm. Country
of origin: Sweden. With electromagnetic clutch.
1015938 Used Strands drilling machine - MT 3.
Type: S32ME. Morse taper: 3. Rpm.: 70-2940. Table size: Ø350 mm.
Automatic feed: yes. Throat: 320 mm. Country of origin: Sweden. With
electro magnetic clutch.
1015471 New Strands pillar drilling machine - MT 4.
Type: S35. Morse taper: 4. Rpm.: 75-3010. Table size: 400 x 500 mm.
Throat: 320 mm. Motor: 1,4/2,0 kW. Drilling capacity: 35 mm. Drilling
depth: 150 mm. Country of origin: Sweden. 5 year warranty on the
gearbox. Can be supplied with electromagnetic clutch.
1015472 New Strands pillar drilling machine - MT 4.
Type: S40. Morse taper: 4. Rpm.: 90-1500. Table size: 400 x 500 mm.
Throat: 330 mm. Motor: 2,2 kW Drilling capacity: Ø40 mm. Drilling
depth: 190 mm. Country of origin: Sweden. Weight: 720 Kg. 5 year
warranty on the gearbox.
1015473 New Strands milling/drilling machine - MT 3.
Type: S25U. Morse taper: 3. Rpm.: 105-2900. Table size: 240 x 600
mm. Throat: 258 mm. Motor: 0,65/0,9 kW. Drilling capacity: Ø25 mm.
Drilling depth: 135 mm. Country of origin: Sweden. Weight: 270 Kg.
Can be supplied with automatic longditudinal feed on the table. 5 year
warranty on the gearbox.