ERMES-SUB
HIGH QUALITY SPEARGUN COMPONENTS
PHONE: +39 3407144021
+39 080601202
WhatsApp: +001 8293805702
www.ermes-sub.net
[email protected]
skipe: ermes-sub
P.I. IT06799850729
C.F. PTRNTN59S29A662X
PATRUNO ANTONIO
FABBRICAZIONE ARTICOLI SPORTIVI
VIA DR. A. SCARANGELLA 70020 TORITTO
1
Relase Mechanism
Back
00.0001.00 Back
00.0001.01 Roll back
€ 48,00
€ 53,00
Backward mechanism, allows you to gain about 5 cm, anti-glare ,
titanium effect, automatic line release can be positioned to the right
or left, available with system Roll
Size:
height : 22,5 mm
width: 16 mm
length : 46 mm, Total 65 mm
Evo-Back
00.0002.00 Evo-Back
00.0002.01 Roll Evo
€ 50,00
€ 55,00
Backward Mechanism, same features and size of the back, easy
installation with only 3 screws from the top, in the version Roll suitable
for large loads.
Adjustment by washers. titanium effect.
Size:
height: 22,5 mm
width : 16 mm
length : 46 mm
total : 65 mm
Black-back
00.0003.00
00.0003.01
00.0003.02
00.0003.03
Black-Back
Roll Black-Back
Steel-Back
Roll Steel-Back
€ 50,00
€ 55,00
€ 50,00
€ 55,00
Backward mechanism, allows you to gain about 5 cm, black color,
automatic line release the right or left, with 3 mounting screws from
the top line, available with Roll system for large loads,
size:
overall height: 22.5 mm,
width: 16 mm
length: 46 mm, total: 65 mm
Black-big
00.0004.00 Black-Big
00.0004.01 Roll-Black -Big
00.0004.02 Steel-Big
00.0004.03 Roll-Steel-Big
€ 52,00
€ 57,00
€ 52,00
€ 57,00
For those who want to make the most of the wood of his rifle, long
levers, line release the right or left, line mounted with 3 screws from
the top. Available in two finishes, stainless or black and Roll version
for high loads,
size:
overall height: 22.5
width: 16 mm
length: 60 mm, total: 79 mm
2
00.0004.00 Polynesia
Polynesia
Black-micro
Ocean
New
Ocean
00.0006.00 Black Micro
00.0006.01 grilletto corto
00.0007.00 Ocean
00.0007.01 Roll Ocean
00.0008.00 New Ocean
00.0008.01 Roll New Ocean
€ 50,00
€ 55,00
Derived from the Ocean but easy installation with only three
screws from the top, , available with system Roll for high loads
size:
height: 20 mm
width: 16 mm
length: 56 mm
Total length: 75 mm
€ 45,00
Traditional mechanism, line release outside, positioned to the right or
left, screw for adjusting the stroke of the trigger
size:
height: 20.5 mm
width: 15 mm
length: 61 mm
Total length: 80 mm
€ 32,00
Mechanism spartan, simple and cheap
size:
height: 20.5 mm
width: 15 mm
length: 61 mm
Total length: 80 mm
00.0011.00
Innovation
€ 48,00
€ 53,00
Traditional mechanism, line release automatically positioned to the
right or left, available with Roll system for high loads,
sizes:
height: 20 mm
width: 16 mm
length: 56 mm
Total length: 75 mm
00.0010.00
Stell
€ 45,00
€ 45,00
The smallest mechanism in the world, black color, automatic line
release the right or left, with 3 mounting screws from the top line,
size:
overall height: 20.5 mm
width: 16 mm
length: 36 mm, 55 mm total.
00.0009.00
Classic
€ 48,00
Backward mechanism, allows you to earn about 7 cm, tumbled finish,
line release a propeller
size:
height: 22.5 mm
width: 16 mm
length: 61 mm; total 80 mm
€ 55,00
Innovative mechanism, allows us to run auctions without notches or
fins, fitted with a device which locks the rod, needs special auction of
easy realization,
size:
height: 20.5 mm
width: 15 mm
length: 61 mm
Total length: 80 mm
3
Reels
Colibrì
Vertical micro reel, pull handle, capacity about 25
meters.
01.0001.46 Colibrì
€ 60,00
11.0005.00 Kit handle replacement
€ 10,00
Falco
Leonardo
Reel vertical clutch shots in 2 sizes from 50 meters
and 100 meters, hilt integrated detachable weight
01.0002.57
01.0003.77
11.0002.00
Falco 57:
Falco 77:
Kit handle:
Reel for coarse fishing in 2 sizes capacity 100 mt and
150 mt, with automatic thread guide, through a
system of gears and worm screw, allows you to
neatly wrap the wire, pull handle kit sold separately.
01.0004.57 Leonardo 57:
01.0005.77 Leonardo 77:
01.0006.93 Leonardo 93:
11.0008.00 Kit handle :
Sula
€ 54,00
€ 58,00
€ 10,00
Horizontal reel capacity of about 50 meters, pull handle,
hilt integrated detachable, universal mount.
01.0009.80
Albatros
11.0007.00 Kit handle:
4
€ 120,00
€ 135,00
€ 140,00
€ 10,00
Horizontal reel capacity of about 50 meters, pull
handle, , universal bracket, weight:
01.0007.80 Sula 80:
01.0008.00 Sula 100:
11.0007.00 Kit handle:
Albatros
€ 68,00
€ 75,00
€ 12,00
€ 65,00
€ 10,00
Bracket videocamera
Bracket Roll
02.0003.00 Bracket Roll complete
02.0004.00 Arm Roll
02.0003.04 Supporto Ermes
€ 25,00
€ 14,00
€ 14,00
Bracket consists of a movable arm removable and foldable. In
the closed position, you have exactly behind the mechanism.
The bracket is suitable for the majority of cameras on the
market (Intrepid, GoPro and Midland). The support is
adaptable to all mechanisms Ermes and most of all the
mechanisms in commerce.
Bracket Ermes
Staffa Cross
Arm Universal
Cross
02.0001.01 Bracket.Ermes (nera) go/mid
€ 16,00
Universal bracket gopro, midland pikotech, mechanisms for
Ermes.
11.0013.00 Kit for screw and washer . Camera
€ 2,50
Lives of American step for video cameras.
System gripping video camera Cross, composed of a dedicated
support and a swivel arm and positionable, complete with
screw
€ 14,00
The cross arm is common to all gripping .
€ 7,00
Support
New Ocean
Support for system Cross dedicated to the New Ocean.
€ 7,00
Bracket
Universal
02.0002.00 bracket.camera Univers.
€ 16,00
Universal bracket air wood, suitable for air guns and rifles in
wood.
5
Heads roller and inverter
Heads roll-inv
The head roll-Inv is being designed for a dual purpose, it can in fact
accommodate the special pulleys for high-load inverter, which
coupled with the Inv-Tube Stopper is optimal for all systems on the
ropes.
If necessary, can turn into a normal head for roller systems, in fact,
the side has a 4-hole, 3 of which are suitable for different positions
centering pulleys choice between Glass, mono-Iron, and Sliding,
giving shape to the configuration.
The remaining free holes and the hole in the graft may be used if
necessary to balance the head with the common lead.
CNC machined from full, a sturdy Delrin, no additional parts except
the steel locking pin goes anyway wire integrated in the bottom
profile of the head.
03.0018.01
03.0018.02
03.0018.03
03.0018.04
Roll-Sliding
Roll-Iron
Roll-Glass
Inv
€
€
€
€
85,00
95,00
95,00
82,00
Comprise a screw M4 x 60 complete with 2 large washers, nut and plastic
shims.
03.0018.05
Inv+Stopper
€ 100,00
It includes Stopper Inverter, 1 screw M4 x 60 complete with 2 large washers,
nut and plastic shims.
03.0018.06 Doble Roll-Inv Sliding
03.0018.07 Doble Roll-Inv Glass
03.0018.08 Doble Roll-Inv Iron
€150,00
€ 160,00
€ 160,00
The equipment of the Doble Roll-Inv includes over the head Roller, an axis 6 x
38, 2 Pulleys Inverters, Inverter 1 stopper, 1 screw M4 x 60 complete with 2
large washers, 1 nut M4, 2 plastic washers 3 mm thick.
Pulley Inverter
The pulley Inverter and turned from solid Delrin, has a central
Microbearings
steel that makes it optimal for all those systems that require a
high operating load.
04.3011.01 6 x 30 x 11 gola 26
Kit Steel Wood
Inverter
the kit Steel Wood is composed of:
1 stopper stell
2 pulegge inverter
1 axi m4 x6 x 38mm complete with spacer washers large
washers and screws poliers
03.0019.00 Kit Steel Wood Inverter
6
€ 18,00
€ 48,00
Kit Plastic Wood
Inverter
U stopper Inverter
03.0021.00 Kit plastic Wood Inverter
€ 54,00
Il kit Plastic Wood is composed of :
1 stopper in Delrin
2 pulley inverter ;1 axi m4 x6 x 38mm complete with spacer
washers large washers and screws poliers
03.0021.00 U stopper Inverter
€ 18,00
Stopper in Delrin for heads Inverter, or wood.
Thanks to its U-shape, you can insert it into the wood from the
bottom.
Q stopper inverter
03.0021.01 Q stopper inverter
€ 18,00
to its square shape fits into our heads modular inverters
can also insert it into the wood from the bottom
Support reel
multi-block
The support reel Multi-block was designed to
install Ermes reels with 2 comfortable poliers large head screws
M4 x 8 (supplied), on commercial rifles tube D 28 mmsono are
3 mounting holes, laterally features 3 comfortable side hooks
for systems preloaded
03.0022.00 D 28 x L 80 mm Porta mulinello
€ 46,00
Bearing Inox
00000.000 cuscinetto inox Misura: 6 x 15 x 5
Replacement for the pulley inverter
7
Kit roller
03.0000.00 kit roller mono base pull.. 14 no bearing € 55,00
03.0000.00 kit roller mono base pull. 16 no bearing € 55,00
Kit roller
mono and double
The kit mono roller base is composed of:
1 pair of sliding pulley (diameter 28, throat 20, width 16 mm) on request, with width
14 mm; 1 board 6 x 54 mm; 1 stopper mono; 1 pair side; 1 hook pretension
03.0001.00 Kit roller mono Iron 14
03.0001.01 Kit roller mono Iron 16
€ 65,00
€ 65,00
Cwith pulleys mono bearing stell of 14 or 16 mm.
03.0002.00 Kit roller mono Iron double bearing 16 € 70,00
The same composition but with pulley double bearing Iron.
03.0003.00 Kit mono roller glass
€ 70,00
With pulley glass.
Kit roller
Double
03.0004.00 Kit double roller base pulley 14
03.0004.01 Kit double roller base pulley 16
€
€
90,00
90,00
The kit double roller base is composed of:
2 pair of pulleys sliding (diameter 28, throat 20, width 16 mm) on request, with
width 14 mm or with pulleys Iron, Iron mono or Glass
2 axle 6 x 82 mm; 1 double stopper; 1 pair side; 2 hook pretension.
03.0005.00 Kit double roller Iron pulley 14
03.0005.01 Kit double roller Iron pulley 16
€ 110,00
€ 110,00
With pulley mono bearing of 14 or 16 mm;
03.0006.00 Kit doppio roller Iron puleg. Double cusc.16
with stell pulley double bearing of16 mm
€ 115,00
03.0007.00 Kit doppio roller glass
€ 115,00
With pulley glass.
Kit mono roller
Transformer
03.0008.00 Transformer base pulley No bearing
03.0009.00 Transformer Iron mono bearing
03.0010.00 Transformer Iron double bearing
03.0011.00 Transformer Glass
€ 65,00
€ 70,00
€ 75,00
€ 75,00
The roller kit mono transformer base is composed of:
1 pair of sliding pulley (diameter 28, throat 20, width 16 mm) on request, with
width 14 mm or with pulleys Iron, Iron mono or Glass
1 board 6 x 54 mm; 1 pair of stopper mono Transformer;
1 side simple Transformer; 1 side stand bar with Transformer;
1 hook pretension; 1 wire goes.
Kit double roller
Transformer
03.0012.00 Transformer base
03.0013.00 Transformer Iron mono bearing
03.0014.00 Transformer Iron double bearing
03.0015.00 Transformer Glass
€ 90,00
€120,00
€ 125,00
€ 125,00
Kit double roller Transformer base is composed of:
2 pairs of pulleys transformer (diameter 28, throat 20, width 16 mm) on request,
with width 14 mm or with pulleys Iron, Iron mono or Glass
1 axis 6 x 54mm; 1 axle 6 x 82 mm; 1 pair of double-stopper; 5 simple bank;
1 bank wire hanger; 2 hook pretension; 1 guide wire.
8
Accessories roller
Pulley
Transformer
Sliding
04.2814.00 Pulley Sliding D28 x H14
per unità €11,00
04.2816.00 Pulley Sliding D28 x H16
per unità€ 11,00
Pulley from the new concept, you can have with Delrin core, (sliding)
or with a bearing niro, (Iron mono) solution that gives greater weight.
dimensions
external 28, 20 throat, axis 6 mm
Pulley
Transformer
Iron mono bearing
04.2814.01 Pulley Iron mono bearing D28 x H14
per unità: € 20,00
04.2816.01 Pulley iron mono bearing D28 x H16
Per unità: € 20,00
Pulley from the new concept, you can have with Delrin core, (sliding)
or with a bearing niro, (Iron mono) solution that gives greater weight.
size:
external 28 mm, 20 mm throat, axis 6 mm
Pulley
Iron
04.2816.02 Pulley iron double bearing D28x H16
per unità: € 25,00
04.2816.16 pulley nude D28 x H16
per unità: € 7,00
Pulley Delrin with double steel bearing niro, static load 244 kg. size:
28 mm outer;
20 mm throat; axis 6 mm
Pulley
Glass
04.3016.02 Pulley glass D30 x 2 c D 19
per unità: € 20,00
Pulley
Inverter
The pulley Inverter and turned from solid Delrin, has a
central Microbearings
steel that makes it optimal for all those systems that
require a high operating load.
Pulley traditional dual-bearing glass Igus, prevents the maintenance
of the same. size:
30mm, 20mm throat, axis 6 mm
04.3011.01 6 x 30 x 11 gola 26 per unità: € 18,00
Axis
05.0305.48
05.0305.57
06.0406.38
06.0406.50
06.0406.54
06.0406.65
06.0406.82
Axis M3 x 5 x 48
Axis M3 x 5 x 57
Axis M4 x 6 x 38
Axis M4 x 6 x 50
Axis M4 x 6 x 54
Axis M4 x 6 x 65
Axis M4 x 6 x 82
€ 6,00
€ 6,00
€ 6,00
€ 6,00
€ 6,00
€ 6,00
€ 6,00
Essential to the project rollers, the ends are threaded internally,
comes with 2 M4 screws and 2 washers.
9
Stopper claw
07.0060.00 Stopper claw 60
07.0120.00 Stopper claw 120
€ 12,00
€ 15,00
Stopper for textile spinners, have 2 nails for the accommodation of
the line and its capture of the auction, in 2 sizes, suitable for mono
and double roller.
Stopper couples
07.2065.00 Stopper 65 (2 pz)
07.2130.00 Stopper 130 (2pz)
€ 7,00
€ 8,00
Stopper in pairs, are placed at a distance and at the desired depth,
thanks to the anchor points in 2 sizes for mono and double roller.
Stopper Tube
Stopper mono
Transformer
Stopper double
Transformer
Bank
transformer with
nail winders
Banks wave
cut from a tube with outer diameter of 16 mm and 13 mm
inside, with numerous lightening design clean, avoid cutting
the wire in abutment with the stopper due to its wraparound
shape, measures have been optimized for the best single and
double roller, simulating all construction needs.
Stopper Tube 16x1,5x110
€ 25.00
Stopper Tube 16x1,5x110
€ 30.00
07.2200.00 Stopper (2pz) mono Transformer € 16,00
Designed to transform a simple speargun in a roller, with a simple
modification.
07.2201.00 Stopper (2pz) double Transformer € 20,00
08.2431.01 bank 4 x 31 (2pz)
€ 8,00
wheelbase 31 mm with 2 nails grommet, a front and a central
removable if necessary.
08.2568.00 banks 5 x 68 (2pz) foro 5 mm
08.2582.00 banks 5 x 82 (2pz) foro 5 mm
08.2668.01 banks 6 x 68 (2pz) foro 6 mm
08.2682.01 banks 6x 82 (2pz) foro 6 mm
€
€
€
€
10,00
11,00
10,00
11,00
Holding sides of the bands, have a nail for winding the line in 2 sizes
suitable for mono and double roller.
10
Trailer
pretension
mono Crocolock
Trailer pretension
double
Crocolock
Trailer
pretension plan
09.0001.01 trailer pret. Crocolock mono
€ 9,00
Allows you to keep the bands lined up under the trunk of your roller.
Supplied with 2 self-tapping screws
09.0002.01 trailer pret. Crocolock doppio
€ 14,00
Aligns perfectly elastic under the trunk of your double roller.
Supplied with 4 screws.
09.0003.00 trailer pret. Croco plan
€ 6,00
trailer tension. Preventing leakage of the bands, original locking
system.
Trailer
pretension
Eagle
09.0026.00 trailer pret. Eagle
Slid-ring
transformer
10.0004.00
€ 7,00
It allows him to keep the elastic perfectly aligned under the trunk of
your roller. Supplied with 2 self-tapping screws.
Slid-ring
€ 7,00
Its shape is designed to fit all the spearguns on the market, you can
adjust the angle of the slide with a simple gripper. Supplied with 2
self-tapping screws.
11
Accessories & Findings
Elsa
10.0000.00 Elsa
€ 7,00
Elsa para trigger is supplied folded to L, the you
could shape with the desired shape is fixed with a
screw and a nail integrated
Elsa piana large
10.0001.00 Elsa piana large
€ 7,00
Elsa moldable large.
10.0002.00 Elsa small
Elsa piana
small
Elsa moldable small.
Eyelet D.10
10.0003.00 eyelet D.10
€ 6,00
€ 6,00
Eyelet multipurpose float line with internal diameter
10 mm
From loading
multipurpose
knife
Release
Polynesia
10.0006.00 from loading multipurpose knife
€ 10,00
From loading multipurpose for roller
00.0405.01 Release Polynesia
€ 6,00
Release lever line star, its particular shape allows you
to interact with the rod, being always in the correct
position.
12
Release Ocean
release Ocean
€ 6,00
Release lever of the line suitable for the mechanisms
of steel series
Kit
compartment
leads
Kit
Thread guide
11.0001.00 Kit compartment leads
€ 8,00
Cover for the ballast compartment allows you to set
the rifle properly.
11.0000.00 kit Thread guide
€ 12,00
Toe cap and scroll line.
11.0002.00 kit complete acc. Drum
€ 23,00
Complete kit
drum
accessories
Consisting of a hilt bent L-shaped and modeled, a kit
compartment leads, and a wire kit
Midle hand
11.0004.00 Kit Midle Handle
€ 45,00
Steel handle for hand guns midle American type.
13
Kit
Remote trigger
11.0003.00 Kit remote trigger
€ 12,00
Accessories for the handle of steel, allows a
mechanism to retract the desired distance, consisting
of a trigger, a control rod, and two supports.
line of high
tenacity
D. 1.6 mm
Dynema Braid
1,5 mm
14.0015.00 line 1,6 mm white
for meter € 0,20
Double braided rope with outer and inner core braided
polyester high tenacità.Diametro 1.6 mmCarico
breaking: kg. 90
14.0015.00 Dynema braid 1,5 mm
for meter € 0.60
14.0020.00 Dynema braid 2 mm
For meter € 0.70
Double braided rope with high tenacity polyester
external to twisting opposed and balanced inner core
and braided Dyneema ® SK75.
D. 1.5 mm Breaking load: kg. 120
D. 2 mm Breaking load: kg. 240
Kit fixing
meccanism Evoback and
New-ocean
11.0010.00 kit fiss. Meccanism
Evo-Back/New-Ocean
€ 4,50
11.0009.00 kit fxing meccanism
€ 2,00
Kit fixing
meccanism
Kit fixing reels
Insert hex steel
14
11.0012.00 Kit fixing reels
€ 3,00
per unità: € 1,50
per unità: € 2,00
Insert threaded
Extension
spring with
eyelets
for unit: € 1,50
Torsion spring
steel
for unit:€ 1,50
Torsion spring
steel double
Pins and steel
parts
Dowel pin
stainless
Screws
stainless button
head bolts hex
wrench
for unit: € 2,00
d 3 x L 55
d 4 x L 16
for unit: € 0,50
for unit: € 0,30
D 3 x 14
D 3 x 16
for unit: € 0,40
for unit: € 0,40
M3xL6
M3 x L 10
M4 x L 6
M4 x L 8
M4 x L 12
M4 x L 14
M4 x L 20
M4 x L 25
M4 x L 60 serie lunga
M4 x L 90 serie lunga
for unit: € 0,10
for unit: € 0,10
per unit: € 0,15
for unit: € 0,15
for unit: € 0,15
for unit: € 0,15
for unit: € 0,15
for unit: € 0,15
for unit: € 0,40
for unit: € 0,60
15
Countersunk
flat head
screws hex
wrench steel
Large round
head screws
with slotted
steel type
poliers
Low
self-locking hex
nut stainless
steel
Wingnut M4
Special
washers
stainless
Snap rings
stainless safety
Circlip
Stainless
Plastic washer
16
M4 x L 16
M4 x L 20
M5 x L 14
for unit: € 0,15
for unit: € 0,15
for unit: € 0,20
M4 x L 8
M4 x L 12
for unit: € 0,15
for unit: € 0,15
Autobloccante M4 x h 5
for unit: € 0,10
normale M4
for unit: € 0,10
M4
for unit: € 0,40
d 4,3 x D 10
d 4,3 x D 9
d 4,3 x D 12
d 4,3 x D 7 sp. 0,5
M4 elastic
for unit: € 0,05
for unit: € 0,05
for unit: € 0,05
for unit: € 0,05
for unit: € 0,05
per albero da 4 mm
per albero da 8 mm
for unit: € 0,40
for unit: € 0,40
per albero da 4 mm
for unit: € 0,30
d 4,2 x D 8 x s 3
for unit: € 0,25
Self-tapping
screws round
head cross
stainless steel
insert
3,5 x L 13
3,5 x L 19
3,5 x L 25
3,5 x L 32
for unit: € 0,10
for unit: € 0,12
for unit: € 0,15
for unit: € 0,15
Self-tapping
screws
countersunk
head steel
insert cross
2,9 x L 13
3,5 x L 9,5
3,5 x L 13
3,5 x L 22
for unit: € 0,08
for unit: € 0,15
for unit: € 0,15
for unit: € 0,15
17