The 3rd International Seminar on Advances in Surface Engineering Special Focus on Thermally Sprayed Coatings and Their Applications
May 28-29 2015, Tampere University of Technology, Finland
Program 28.5.2015
Program 29.5.2015
8.30 Registration and coffee
8.30 Registration and coffee
Session 1, chairman Prof. Petri Vuoristo
9.00 Opening of the ASE seminar
Prof. Petri Vuoristo, Professor at Tampere University of Technology, Finland
9.05 Introduction to Thermal Spray Center Finland
Prof. Petri Vuoristo, Professor at Tampere University of Technology, Finland
9.20 Thermal spray processes and applications - development trends
Mr. Mathias Karlsson, Sales & Branch Manager at Oerlikon Metco, Linköping, Sweden
Session 3, chairman D.Sc.(Tech.) Maria Oksa
9.00 Wear properties of chromium carbide based HVOF and HVAF coatings up to 800 °C
Dipl.-Phys. Jonas Norpoth, Scientist at AC2T Research GmbH, Austria
9.40 Onsite thermal spraying for paper industry applications
Mr. Ingmar Vesterlund, Managing Director at PR Rolls Oy, Finland
10.00 Break
10.30 Industrial applications of thermal spray coatings in energy, mining and related
industries
D.Sc.(Tech.) Juha Sipilä, Project Manager at Telatek Service Oy, Finland
11.10 Computational materials engineering for thermal sprayed coatings
Mr. Tomi Suhonen, Senior Scientist at VTT Technical Research Centre of Finland
11.40 Approaches for linking the spray process to coating performance in high velocity
thermal spraying
Mr. Tommi Varis, Project Manager at Tampere University of Technology, Finland
10.20 Advanced hybrid thermal spray processes - principles and coating properties
Dr. Sophie Costil, Université de Technologie de Belfort-Montbéliard, Belfort, France
11.00 New trends in cold spray technology and coating materials
Dr. Heli Koivuluoto, Senior Research Fellow at Tampere University of Technology,
Finland
11.30 Developments in thermal spray process monitoring and control by novel
diagnostic equipment,
Dr. Jussi Larjo, Senior Scientist at Oseir Oy, Finland
12.00 Lunch
Session 2, chairman Dr. Heli Koivuluoto
13.00 Development on thermal spray materials
Mr. Olav Norheim, Sales Manager at H.C. Starck, Sweden
13.40 From powders to thermal sprayed coatings
M.Sc. Ulla Kanerva, Research scientist at VTT Technical Research Centre of Finland
14.00 Coffee break
14.30 Post treatment of thermally sprayed coatings for improved corrosion and
mechanical properties,
Mr. Petri Sorsa, CEO at Millidyne Oy, Finland
15.00 Exploitation of thermal spray coatings for high temperature corrosion protection Case studies of power plant boilers
D.Sc.(Tech.) Maria Oksa, Senior Scientist at VTT Technical Research Centre of Finland
15.30 Boiler supplier's perspective on coatings and claddings
Dr. Mikko Uusitalo, Material Technology Manager at Valmet Technologies, Inc., Finland
16:00 Laboratory tour and cocktails
Contact persons:
Dr. Minna Kotilainen, p. +358 40 849 0189
Prof. Petri Vuoristo, p. +358 40 849 0044
[email protected]
Tampere University of Technology,
Korkeakoulunkatu 6, Konetalo, Lecture hall K1703
33720 Tampere, FINLAND
10.20 Break
12.10 Lunch
Session 4, chairman Dr. Sophie Costil
13.10 Properties and performance of HVAF sprayed hard metal coatings
M.Sc. Ville Matikainen, Doctoral student at Tampere University of Technology, Finland
13.30 HVOF and HVAF coatings for protection of hydroturbines from wear
Mr. Nikolay Kh. Baldaev, Deputy Director for Technologies and Development at Plackart
JSC., Moscow, Russia
14.00 Liquid flame spraying for surface modifications - a review
Prof. Jyrki Mäkelä, Professor at Tampere University of Technology, Finland
14.20 Summary of thermal spray developments
Prof. Petri Vuoristo, Professor at Tampere University of Technology, Finland
14.40 End of Seminar
www.tut.fi/ase3