1. automotive and vehicles

ECUreader 4.10
Autodiagnosis 1 of 4
Year 2007
Summary
Welcome
The Update from 4.00 to 4.10
Cars / Bikes
Technical Bulletin
Special Procedures
Q&A
Autodiagnostic 4.10 - 03.04.07
ATA – TECNOTEST T & M
The Update 4.10
Autodiagnostic 4.10 - 03.04.07
ATA – TECNOTEST T & M
New entries 4.10
Q7
Autodiagnostic 4.10 - 03.04.07
ABS
(-07)
AIRBAG
(-07)
SUSPENSION CONTROL
(-07)
LANE CHANGE ASSIST
(-07)
MAINTAIN LANE ASSIST
(-07)
RADIO / CD
(-07)
SUNROOF
(-07)
A/T
(-07)
CLIMA
(-07)
VOCAL CONTROL
(-07)
STEERING WHEEL ELECTRONICS
(-07)
ATA – TECNOTEST T & M
New entries 4.10
Q7
Autodiagnostic 4.10 - 03.04.07
REAR A/C PANEL
(-07)
TRAILER FUNCION
(-07)
SPECIAL FUNCTION
(-07)
ENGINE MANAGEMENT
(-07)
ENGINE MANAGEMENT 2
(-07)
ENGINE MANAGEMENT 3
(-07)
CHASSIS MANAGEMENT
(-07)
DRIVER IDENTIFICATION
(-07)
IMMOBILIZER
(-07)
MEDIA PLAYER 1
(-07)
MEDIA PLAYER 2
(-07)
ATA – TECNOTEST T & M
New entries 4.10
Q7
Autodiagnostic 4.10 - 03.04.07
PASSENGER SEAT REG.
(-07)
STEERING COLUMN/SEAT ADJ.
(-07)
HEADLIGHT LEVEL
(-07)
REAR SEAT REGULATION
(-07)
BATTERY MANAGEMENT
(-07)
A.C.C. (adaptive cruise control)
(-07)
VEHICLE POSITION RECOGNIT.
(-07)
AUTONOM./SUPPL. HEAT
(-07)
DIGITAL TV TUNER
(-07)
CENTR. ELECTRIC SYS.
(-07)
DASH DISPLAY UNIT
(-07)
ATA – TECNOTEST T & M
New entries 4.10
Q7
Autodiagnostic 4.10 - 03.04.07
CENTR. ELECTR. SYS. 2
(-07)
HATCHBACK ELECTR. SYS
(-07)
CONFORT SYSTEM
(-07)
SUSPENSION CONTROL
(-07)
BRAKE PADS REPLACEMENT
(-07)
SOUND SYSTEM
(-07)
ELECTRIC POWER STEERING
(-07)
PHONE
(-07)
STEERING WHEEL ELECTRONIS
(-07)
DIGITAL RADIO TUNER
(-07)
SAT. RADIO TUNER
(-07)
DIGITAL TV TUNER
(-07)
DASH DISPLAY UNIT
(-07)
ATA – TECNOTEST T & M
New entries 4.10
Serie 3 (E90-91)
ABS+TRACT.CONTR.
TEVES
(04-07)
AIRBAG
CLIMA
PARKING AID
DASHBOARD
VISUAL./TELEMATICS
BOSCH
SIEMENS/VDO
BOSCH
SIEMENS/VDO/BORG
ALPINE
(04-07)
(04-07)
(04-07)
(04-07)
(04-07)
Autodiagnostic 4.10 - 03.04.07
ATA – TECNOTEST T & M
New entries 4.10
C1
ABS
BOSCH 8.0
C2
ENGINE MANAGEMENT
ENGINE MANAGEMENT
SIEMENS
SAGEM
1.4 HDI
1.4
ENGINE MANAGEMENT
ENGINE MANAGEMENT
SIEMENS
BOSCH EDC 16
1.4
1.4 HDI
C3
Autodiagnostic 4.10 - 03.04.07
ATA – TECNOTEST T & M
New entries 4.10
C3 PLURIEL
ENGINE MANAGEMENT
ENGINE MANAGEMENT
SAGEM
BOSCH EDC16
1.4
1.4 HDI
JUMPER2
ENGINE MANAGEMENT
ENGINE MANAGEMENT
ENGINE MANAGEMENT
BOSCH EDC15
BOSCH EDC15
BOSCH EDC15
2.0 HDI
2.3 HDI
2.8 HDI
XSARA2
REMOTE CONTROL CODING
ENGINE MANAGEMENT
Autodiagnostic 4.10 - 03.04.07
VALEO
BOSCH EDC16
1.4 HDI
ATA – TECNOTEST T & M
New entries 4.10
AIRBAG
ENGINE MANAGEMENT
ENGINE MANAGEMENT
PARKING AID
DISPLAYS/TELEMATICS
CLIMA
DASHBOARD
ENGINE MANAGEMENT
Autodiagnostic 4.10 - 03.04.07
BRAVO 07
BOSCH MOTRONIC 7.3
BOSCH EDC 16
VALEO
MARELLI CONNET3
PUNTO 05
DENSO
DELPHI
PUNTO 99
BOSCH MOTRONIC7.3
ATA – TECNOTEST T & M
New entries 4.10
DOBLO 03
ABS
AIRBAG
AIRBAG
KEY CODING
DIESEL MANAGEMENT
ENGINE MANAGEMENT
ENGINE MANAGEMENT
ENGINE MANAGEMENT
DASHBOARD
CHASSIS NETWORK
ENGINE MANAGEMENT
Autodiagnostic 4.10 - 03.04.07
ATE TEVES MK20
AUTOLIV
SIEMENS
DELPI/MARELLI
LUCAS
MARELLI 6JF CF3
MARELLI 49F/59F
BOSCH EDC15
MARELLI
DELPHI/MARELLI
BOSCH MOTRONIC7.3
ATA – TECNOTEST T & M
New entries 4.10
IDEA
PARKING AID
DISPLAYS/TELEMATICS
ENGINE MANAGEMENT
NUOVA PANDA
ENGINE MANAGEMENT (CNG)
DISPLAYS/TELEMATICS
PALIO
ENGINE MANAGEMENT
STILO
ENGINE MANAGEMENT
ENGINE MANAGEMENT
Autodiagnostic 4.10 - 03.04.07
VALEO
MARELLI CONNET3
BOSCH MOTRONIC7.3EOBD
METATRON
MARELLI CONNET3
BOSCH MOTRONIC7.3
MARELLI
BOSCH MOTRONIC7.3
ATA – TECNOTEST T & M
New entries 4.10
PALIO RESTYLING
ENGINE MANAGEMENT
ENGINE MANAGEMENT
PUNTO 03
ENGINE MANAGEMENT
ENGINE MANAGEMENT
ENGINE MANAGEMENT
SEDICI
REMOTE CONTROL CODING
ENGINE MANAGEMENT
ELECTRONIC 4WD
ABS
AIRBAG
CHASSIS NETWORK
ELECTRONIC POWER STEERING
IMMOBILIZER
DISPLAYS/TELEMATICS
Autodiagnostic 4.10 - 03.04.07
MARELLI 6F
BOSCH EDC15
MARELLI IAW 6F
BOSCH EDC15
BOSCH MOTRONIC7.3
NKS
BOSCH EDC16
TC
ABS
SRS
BCM
EPS TSM
CODE
MARELLI CONNECT 3
ATA – TECNOTEST T & M
New entries 4.10
FREELANDER
ABS
ENGINE MANAGEMENT
ENGINE MANAGEMENT
ENGINE MANAGEMENT
ATE
ROVER
BOSCH
BOSCH
(01-)
(99-)
(00-)
(01-)
1.8i
2.0 TD
2.0 TD4
ACCORD
ENGINE MANAGEMENT
Mitsubishi EDC Common Rail
2.2 i-CTDi
YPSILON
ENGINE MANAGEMENT
ENGINE MANAGEMENT
Autodiagnostic 4.10 - 03.04.07
BOSCH Motronic ME 7.3 H4 EOBD
Y
BOSCH Motronic ME7.3 H4
1.2 16v
1.2 16v
ATA – TECNOTEST T & M
New entries 4.10
ENGINE MANAGEMENT
PARKING AID
ENGINE MANAGEMENT
PARKING AID
DISPLAYS/TELEMATICS
ABS
Autodiagnostic 4.10 - 03.04.07
THESIS
BOSCH
VALEO
MUSA
BOSCH MOTRONIC7.3
BOSCH
VALEO
3.2 V6
1.4 16v
1.2 16v
1.2 16v
LYBRA
LUCAS TRW
ATA – TECNOTEST T & M
New entries 4.10
SERVICE RESET
SERVICE RESET
SERVICE RESET
SERVICE RESET
AIRBAG SETTINGS
Autodiagnostic 4.10 - 03.04.07
ZAFIRA B
SIGNUM
VECTRA C
ASTRA H
(04-)
(04-)
ATA – TECNOTEST T & M
New entries 4.10
1007
SERVICE RESET
ENGINE MANAGEMENT
DASHBOARD
ELECTRONIC POWER STEERING
DISPLAYS/TELEMATICS
AIRBAG
RADIO / CD
ABS+TRACT.CONTR.
ABS
SAGEM
SAGEM
SAGEM
KOYO
SAGEM
AKF/AUTOLIV
CLARION
ATE-TEVES
1.4
107
BOSCH
206
SUNROOF
Autodiagnostic 4.10 - 03.04.07
ATA – TECNOTEST T & M
New entries 4.10
ENGINE MANAGEMENT
ENGINE MANAGEMENT
ENGINE MANAGEMENT
Autodiagnostic 4.10 - 03.04.07
BOXER
BOSCH EDC15
BOSCH EDC15
BOSCH EDC15
(02-06) 2.0 HDI
(02-06) 2.3 HDI
(02-06) 2.8 HDI
ATA – TECNOTEST T & M
New entries 4.10
GRAND SCENIC II
ENGINE MANAGEMENT
SIEMENS
1.5 dCi
ENGINE MANAGEMENT
BOSCH EDC 16
1.9 dCi F.A.P.
PARKING BRAKE
MEGANE II
ENGINE MANAGEMENT
SIEMENS
1.5 dCi
ENGINE MANAGEMENT
BOSCH EDC 16
1.9 dCi F.A.P.
SCENIC II
PARKING BRAKE
ENGINE MANAGEMENT
SIEMENS
1.5 dCi
ENGINE MANAGEMENT
BOSCH EDC16
1.9 dCi F.A.P.
Autodiagnostic 4.10 - 03.04.07
ATA – TECNOTEST T & M
New entries 4.10
ROVER 75
ABS
A/T
ABS
TCS
SORRENTO
JIMNY
SX4
ABS
AIRBAG
IMMOBILIZER
CHASSIS NETWORK
ELECTRONIC POWER STEERING
Autodiagnostic 4.10 - 03.04.07
ATA – TECNOTEST T & M
New entries 4.10
ABS
ENGINE MANAGEMENT
ABS
AIRBAG
DASHBOARD
AYGO
BOSCH
YARIS 05
DENSO
DENSO
DENSO
(07-)
(07-)
(07-)
(07-)
1.3 VVTi
CADDY
RADIO / CD
IMMOBILIZER
TRANSPORT MODE
DASHBOARD
COMFORT SYSTEM
ELECTRONIC POWER STEERING
Autodiagnostic 4.10 - 03.04.07
(04-06)
(04-06)
(04-06)
(04-06)
(04-06)
(04-06)
ATA – TECNOTEST T & M
Special Procedures
Autodiagnostic 4.10 - 03.04.07
ATA – TECNOTEST T & M
New entries
OPEL ASTRA H
SERVICE INTERVAL SETTING
The procedure allows to set up the service program according to the manufacturer
specs, in order to the country.
1 = 5000 km Cile, Taiwan 2 = 7500 km Malta, Marocco, Tunisia, Algeria, Cape
Verde 3 = 10000 km Oman, Qatar, Arabia, Filippine, Siria,Lebanon, Kuwait, Arab
Emirates, Cina, Bahrein, India, Giordania, Honk Kong
4 = 15000 km Ukraine, Belarus, Latvia, Lithuania,
Moldova, Estonia, Iceland, Kazakhstan, Australia/New Zeland
Israel, Japan, Mexico, Singapore , Other NON EU countries 5 = 30000 km
remaining european countries, engine type Z30LER or others, or FAP equipped
Autodiagnostic 4.10 - 03.04.07
ATA – TECNOTEST T & M
New entries
OPEL ASTRA H
AIRBAG CONFIGURATION
In case of replacing the airbag ECU, through this function is possible to set it in
order to the installed components/options.
WARNING:
Please follow carefully each step shown by the tool !
After reading all the information from the old ECU, it will ask to exit the
diagnostic, and with ignition OFF, the battery disconnection too ( please be sure
of the internal battery charge’s level ! ) .
Then it will ask to connect the new ECU, start the diagnostic and once in
comunication the old value will be loaded.
Autodiagnostic 4.10 - 03.04.07
ATA – TECNOTEST T & M
New entries
RENAULT MEGANE II - Engine Management
BOSCH EDC 16 - INJECTOR CODING
As most of common rail systems, also this one needs to know each injector code
installed in each cylinder. In case of replacing one or all the injectors, the new
codes (written on the injector’s body or in the documentation delivered with)
must be sent to the ECU to replace the old ones.
This function allow to to that, just selecting the cylinder ID and following each
step shown by the tool. Each injector’s code is 6 digits/letters.
Please note:
1. Digits 0 or 9 and letters J and Q are not accepted by the ECU ( so, normally
they are not present )
2. French cars typically have the cylinder #1 placed to the GEARBOX side
3. In case of replacement of ALL injectors, you can select the option “1-2-3-4”
from the list of functions, and the tool will ask for all codes step by step
automatically.
Autodiagnostic 4.10 - 03.04.07
ATA – TECNOTEST T & M
New entries
RENAULT MEGANE II - Engine Management
BOSCH EDC 16 – F.A.P. regeneration
This procedure permits to run the F.A.P. REGENERATION, and it must be used
ONLY when the FAP warning lamp is ON.
Please take care about it, because during the regeneration phase the exaust pipe
and the FAP will reach very high temperature values.
Due to that, please check for NO OCCLUSIONS in the exaust pipe and run it only
with the vehicle placed on a clean pavement.
WARNING:
Run the regeneration function ONLY with the engine at the operating temperature
( 80°C). To be sure of it, just check the engine temp value at the LIVE DATA page.
Autodiagnostic 4.10 - 03.04.07
ATA – TECNOTEST T & M
New entries
FIAT PUNTO 05 - CLIMA DENSO
Steppers Basic Settings
In case of replacing Clima ECU or air distribution’s actuators (steppers), this
procedure needs to be runt. It will allow the ECU to learn the range of each stepper
Warning:
Remember to run the procedure with engine OFF.
Autodiagnostic 4.10 - 03.04.07
ATA – TECNOTEST T & M
New entries
FIAT PUNTO 05
PROXY SERVER CONFIGURATION
( body network setup )
The body network ECU needs to know all the other ECUs connected to the
network, and that depends to the installed options on the vehicle. The procedure is
automatic, just run it.
Please mind that it could be better to check first if this is necessary; looking at the
live data page is possible to see if the setup needs to be done.
LAND ROVER – Engine Management DDE 4
Idle setting
In case of need, the idle can be increased or decreased through this function.
Please note that the idle can be changed by selecting some preset values
programmed by the manufacturer in the ECU.
Note: the adjustment will take effect at the next engine start
Autodiagnostic 4.10 - 03.04.07
ATA – TECNOTEST T & M
New entries
RENAULT MEGANE II
Engine Management SIEMENS
1.2 & 1.5 dCI
INJECTORS CODING
As most of common rail systems, also this one needs to know each injector code
installed in each cylinder. In case of replacing one or all the injectors, the new codes
(written on the injector’s body or in the documentation delivered with) must be sent
to the ECU to replace the old ones.
This function allow to to that, just selecting the cylinder ID and following each step
shown by the tool. Each injector’s code is 6 digits/letters.
Autodiagnostic 4.10 - 03.04.07
ATA – TECNOTEST T & M
New entries
RENAULT MEGANE II
Engine Management SIEMENS
1.2 & 1.5 dCI
Fuel line/H.P. pump Bleeding
Through this function is possible to bleed the low pressure fuel line and refill the HP
pump when replaced or because maintenance/repars. Once set, the ECU will act a
strategy that will be performed at the next engine start.
How to:
1 = Run the function
2 = Leave the diagnosis
3 = Switch ignition Off, then wait for Immobilizer warning light ON
4 = Push START key and wait
WARNING:
Don’t leave the car or do something else until engine will start!
Cranking will be performed 20 seconds late (approx.)
Autodiagnostic 4.10 - 03.04.07
ATA – TECNOTEST T & M
New entries
FIAT PUNTO 99
Engine Management BOSCH ME 7.3.4 EOBD
Throttle box basic setting
In case of ECU or electronic throttle box replacing, the throttle position must be
learnt by the system to manage properly the idle.
Here the steps to do:
1 = Switch ignition On and wait 60 seconds
2 = Switch ignition Off and wait 15 seconds
3 = Start with the diagnostic, then check out the relating items at the live data’s
page to be sure that the procedure could be succesfully done
WARNING:
during the procedure, DON’T TOUCH any pedal ( gas, clutch, brake, or A/T Selector
lever )
Autodiagnostic 4.10 - 03.04.07
ATA – TECNOTEST T & M
New entries
FIAT STILO
Engine Management MARELLI IAW 5NF EOBD
Throttle box basic setting
As per the previouse system, here too the procedure for electronic throttle box
basic setting.
Remember to clear the fault memory before proceeding with it.
To be sure of the procedure’s completion, mind to check at the live data page
the item relating to the learnt throttle position, that must be OK
(if “not ok” check all done steps and repeat it in case).
Autodiagnostic 4.10 - 03.04.07
ATA – TECNOTEST T & M
New entries
FIAT STILO
Engine Management
MARELLI IAW 5NF EOBD
VEHICLE SETUP RESET
Through this function the vehicle configuration stored in the engine ECU (
depending to the installed options like Abs, clima, A/T, electric sterring power
and so on) will be renewed.
NOTE:
Run this function in case of erratic configuration only or if trying/installing a
second hand ECU
Autodiagnostic 4.10 - 03.04.07
ATA – TECNOTEST T & M
New entries
NEW VW Airbag configuration procedure
All the new airbag units must be coded in order to the units/options installed on each individual
veichle. For all VW-AUDI models equipped with CAN Airbag’s version, here it is possible to do it in 3
different ways.
Manually
You must have a CODE to fill in, 5 digits.If less than 5, please put some “0” (zero) BEFORE the
digits
Copy&Paste
The following steps must be RESPECTED !
1. Start with the OLD ECU, so it has to work in therms of autodiagnostic
2. The REFERENCE CODE ( spare part #) MUST BE EXACTLY THE SAME. If small difference
found or in case of doubts, please stop ! Once set, the procedure is irreversible!
3. Follow carefully each step shown by the tool during the procedure
4. Before starting with it, be sure about the charge level of the INTERNAL BATTERY OF THE
TOOL ( the procedure will ask to disconnect the veichle’s battery)
Colour code
New ECUs are delivered in a carton box where you can see the spare part #: just near it you can
find the “colour code”, 3 digits or letters, and the first one that is always “0” (zero) must be
not considered
Autodiagnostic 4.10 - 03.04.07
ATA – TECNOTEST T & M
New entries
NEW VW Airbag configuration procedure
Here a dedicated function to configure Airbag ECUs: Lupo, Polo, Golf, Bora, New beetle, Passat
e Sharan indicativamente a partire dall' anno modello 1997 fino all'anno modello 2004.
Manually
You must have a CODE to fill in, 5 digits.If less than 5, please put some “0” (zero) BEFORE the
digits
Copy&Paste
The following steps must be RESPECTED !
1. Start with the OLD ECU, so it has to work in therms of autodiagnostic
2. The REFERENCE CODE ( spare part #) MUST BE EXACTLY THE SAME. If small difference
found or in case of doubts, please stop ! Once set, the procedure is irreversible!
3. Follow carefully each step shown by the tool during the procedure
4. Before starting with it, be sure about the charge level of the INTERNAL BATTERY OF THE
TOOL ( the procedure will ask to disconnect the veichle’s battery)
Colour code
New ECUs are delivered in a carton box where you can see the spare part #: just near it you
can find the “colour code”, 3 digits or letters, and the first one that is always “0” (zero)
must be not considered
Autodiagnostic 4.10 - 03.04.07
ATA – TECNOTEST T & M
New entries
PEUGEOT 1007 ABS/ESP MK60
Steering wheel sensor calibration
In case of dismounting/replacing parts like steering wheel or the sensor, or
maintenance on the alignment, the calibration on the steering wheel sensor
must be done. This function allows to do it.
WARNING:
Stop the car in a flat part of floor, no loads on, wheels aligned properly, then
run the procedure.
WHEEL SENSOR CALIBRATION CLEARING
In case of need , the stored calibration can be erased. Please note that this
must be done BEFORE dismounting the sensor.
Autodiagnostic 4.10 - 03.04.07
ATA – TECNOTEST T & M
Q& A
Autodiagnostic 4.10 - 03.04.07
Domande
ATA – TECNOTEST T & M