TLT CR Tapelight Series 12VDC Damp Location Continuous Reel

TLT CR Tapelight Series
12VDC Damp Location
Continuous Reel
Super High Output Flexible Tapelight
Catalog No.
Type
Specifications/Features
Project
Tape Light
Flexible, low voltage linear LED accent lighting system provides high quality
illumination for many indoor applications including: Display Lighting, Under Cabinet,
Cove and Soffit, Accent and Edge Lighting.
High output LEDs provide excellent luminous intensities at low drive currents,
resulting in low power consumption and consistent, stable performance, delivering
334 lumens (Delivered lumens based on 1ft. of 3000K tape).
Modular “plug and play” system features a wide range of power supplies, controllers
and connectors. System is easy to install with no need for field soldering.
Available in 16' reels of continuous super high output tapelight (without mid-connectors) in 2700K (warm white), 3000K (neutral white), 4000K (cool white), and
6500K (cool white), dimmable using any of the TL series dimming controls.
Includes one female and one male end connector per reel.
Reel may be cut in 4" increments to provide optimal fit and flexibility for any
installation.
1/8"
Mounting
The TLT tapelight is easy to install using the 3M double sided adhesive on each
segment; tape can be directly mounted to most surfaces. For additional thermal
heatsinking, protection of the LEDs and an overall cleaner aesthetic, using the
aluminum mounting channel (standard, recessed, or angled) is recommended.
Custom curving of standard mounting channel is available, consult factory for details.
The aluminum mounting channel is easily installed utilizing the appropriate set of
mounting clips.
For added protection of the LEDs, as well as subtle diffusion and glare control, a
clear or frosted lens may be used. The lens must be used with the aluminum
channel and is easily installed by simply pressing the lens into the channel.
5/16"
16'
TLT12V3 Series Super High Output Tapelight Driver Sizing
Watts per foot: 3.6W/ft.; Max Run: 20 ft.
Warranty
This product is covered by ConTech’s full replacement guarantee after date of
purchase: Five (5) year replacement guarantee when tape light is installed using the
aluminum mounting channel; Three (3) year replacement guarantee when installed
without the aluminum mounting channel.
Listing
cCSAus Certified to UL standards.
Suitable for dry or damp locations. Not suitable for wet locations.
Input Voltage
Output
TLT
12V
3
TLT
12V - 12V DC
3 - Super High
Output
Wattage
12V DC
24W
6 ft.
TLP12VP36
Plug-In
12V DC
36W
10 ft.
Max Load
TLP12VP60
Plug-In
12V DC
60W
16 ft.
TLP12VHW20** Hardwire
12V DC
20W
5 ft.
TLP12VHW60** Hardwire
12V DC
60W
16 ft.*
Color Temperature
Length / Quantity
16CR
Tapelight Summary
27K 3K 4K 6K -
TLT12V327K
TLT12V33K
TLT12V34K
2700K
3000K
4000K
6500K
Supply Voltage
12VDC
12VDC
12VDC
12VDC
Watts (per ft)
3.6
3.6
3.6
3.6
TLT12V36K
363
Lumens (per ft)
297
334
346
Efficacy (Lm/W)
72
72
82
86
LED Beam Angle
120°
120˚
120˚
120˚
# of LEDs (per ft)
18
18
18
18
5/8"
5/8"
5/8"
5/8"
Cut Length
4"
4"
4"
4"
Max Run (ft)
20
20
20
20
www.contechlighting.com
16CR - 16' Continuous Reel
2700K
3000K
4000K
6500K
Color Temperature
1-847-559-5500
Input Voltage
TLT12V33K16CR
Tapelight Series
LED Spacing
Type
Plug-In
*If the max load exceeds the max run length, you may run multiple runs not to
exceed the max run length.
**Hardwire drivers may be remotely mounted up to 40' from start of run using
12 gauge wire. Refer to wiring chart on installation instructions for voltage
drop information.
Ordering Information
Example Order:
Model No.
TLP12VP24
Please
Recycle
All specifications subject to change without notice.
TLT CR Tapelight Series
12VDC Damp Location
Continuous Reel
Super High Output Flexible Tapelight
Type
Photometrics
Project
TLT12V33K12
Designed for 50,000 Hour Lamp Life1; LM-63 Test No. 80558
Light Output (Fixture Lumens): 334
Total Watts@120V: 4
Lumens Per Watt: 80
Color Rendering Index (CRI)¹: 82
Color Temperature (CCT)²: 2931K Warm White
Spectral Power Distribution Chart³
LM-79 Test No. 80559
For standard output, multiply results by 0.24, for high output, multiply results by 0.43
0
Candela Curve
75°
60°
100
3.5
45°
150
410
440
470
500
530
560
590
620
650
680
710
740
770
0°
Wavelength (nm)
1-847-559-5500
Candlepower Summary
90°
50
7
0
380
Catalog No.
www.contechlighting.com
15°
30°
FROM 0
0
5
15
25
35
45
55
65
75
85
95
Please
CANDELA
122
122
118
111
102
88
70
12
6
1
0
Recycle
LUMENS
12
33
51
63
67
61
34
12
2
0
Beam Distribution: 115°
Spacing Criteria: 1.3
All specifications subject to change without notice.