VESTIL MANUFACTURING
PURITY CYLINDER GASES, INC.
AND
2014/15 MATERIAL HANDLING GUIDE
CYLINDER EQUIPMENT
FORK TRUCK ATTACHMENTS
ERGONOMIC EQUIPMENT
PROTECTIVE BARRIERS
GANTRY AND JIB CRANES
DRUM HANDLING
Wall Mounted Cylinder Brackets
Portable Cylinder Clutcher
Simple design is easy to install. Simply bolt to wall and
then secure cylinder with strap. Edges are protected with
rubber guards on the steel units. Choose either steel or
CB-W-S
molded plastic construction. Maximum 12" cylinder diameter.
Installation hardware is not included.
PART NO.
CB-W-S
CB-W-2S
CB-W-3S
CB-W-P
CB-W-2P
MATERIAL
STEEL
STEEL
STEEL
PLASTIC
PLASTIC
CYLINDER
CAPACITY
1
2
3
1
2
CB-W-P
NET WT. LIST PRICE
(POUND)
EACH
2
$19.60
7
40.20
10
59.60
1
$15.30
CB-W-3S
2
26.00
PART NO.
CB-S-2S
CB-ST-4
CB-ST-6
AS-125
AS-125-4PK
OVERALL SIZE
CYLINDER
(W x D x H)
CAPACITY
2
273/32" x 1019/32" x 307/8"
35½" x 20¾" x 36½"
4
47½" x 20¾" x 36½"
6
ANCHOR BOLTS FOR CONCRETE (1) ½" x 5"
ANCHOR BOLTS FOR CONTRETE (4) ½" x 5"
CB-ST-4
NET WT. LIST PRICE
(POUND)
EACH
35
$169.00
58
$220.00
68
247.00
1
$3.80
2
15.20
Magnetic Cylinder Hand Truck
Designed and built to transport gas cylinders with ease, this
hand truck uses strong magnets to hold the tanks in place.
Units rolls easily on two (2) 10" x 2" rubber tires and two
(2) 4" x 1½" swivel casters. The tilt back design allows for
effortless transportation.
PART NO.
MCHT-350
OVERALL SIZE
(W x L x H)
185/8" x 35¼" x 59¾"
UNIFORM
CAPACITY
350 lb.
NET WT. LIST PRICE
(POUND)
EACH
104
$622.00
Cylinder Hand Truck
Ideal for transporting cylinders from storage to work space.
Tilt back design for effortless transportation. Chains and
contoured back cradle provide utmost safety. The two
mounted chains measure 28" long. Unit rolls smoothly on
two (2) 10" x 2" mold-on-rubber wheels and two (2) 4" x 13/8"
phenolic casters.
PART NO.
CYHT-350
OVERALL SIZE
(W x L x H)
30½" x 17" x 47"
NOSE PLATE
(W x D)
25½" x 7"
UNIFORM
CAPACITY
350 lb.
OVERALL SIZE
UNIFORM ACCOMMODATES NET WT. LIST PRICE
PART NO.
(W x L x H)
CAPACITY
CYLINDERS
(POUND)
EACH
8½" x 12½"
84
$647.00
OCC-2 3215/16" x 285/16" x 537/16" 250 lb.
Manual Cylinder Lifters
Manual Cylinder Lifters are easy to use and allow for
safely lifting cylinders. The pivoting design grabs and
squeezes the cylinder when lifted. Lifters feature a
rubber-coated center and handle holes. Straight lift
with one person or use for a 2 person team lift. Steel
construction with a powder coat yellow finish.
Cylinder Bracket Stands
Our Cylinder Bracket Stands allow for storage of cylinders
in the vertical position. The straps are included for securing
the cylinders to the stand. Stands have pre-drilled mounting
holes for attachment to the floor (floor mounting hardware is
not included). Stands are powder coat blue and steel brackets
feature gray painted finish. Assembly hardware included.
Designed for lifting and moving gas cylinders with automatic
operation. Simply raise and lower handle to operate. Unit
raises cylinders 2" off the ground. Works with cylinder
diameters between 8½" to 12½". Includes two (2) rigid and
one (1) swivel caster. Welded steel construction with painted
yellow finish.
NET WT. LIST PRICE
(POUND)
EACH
84
$132.00
PART NO.
CYL-M-7
CYL-M-9
CYL-M-9
CYLINDER SIZE
COLOR
7" DIAMETER
9" DIAMETER
YELLOW
YELLOW
NET WT. LIST PRICE
(POUND)
EACH
9
$142.00
8
142.00
Cylinder Storage Cabinets
Steel cabinets for storage of cylinders. Cylinder
storage capacity is based on cylinder size. Sides
are made of expanded steel mesh. Top is made of
solid sheet steel. Lockable doors protect cylinders
(padlock not included). Base includes lag holes for
securing cylinders. Vertical units include chains for
securing cylinders. Includes red lettered signage
noting “Flammable” contents. Meets NFPA 58 and
OSHA sec. 1910.110 design standards. Rugged steel
construction with safety yellow powder coat finish.
This style is only for sale in the USA.
CYLINDER OVERALL SIZE
PART NO.
CAPACITY
(W x L x H)
HORIZONTAL STORAGE CABINETS
4
30" x 32" x 35¼"
CYL-H-4-KD
8
30" x 32" x 68¼"
CYL-H-8KD
16
60" x 32" x 68¼"
CYL-H-16KD
4
30" x 32" x 35¼"
CYL-H-4
8
30" x 32" x 68¼"
CYL-H-8
16
60" x 32" x 68¼"
CYL-H-16
VERTICAL STORAGE CABINETS
5-10 30" x 32" x 68¼"
CYL-V-510
10-20 60" x 32" x 68¼"
CYL-V-1020
5-10 30" x 32" x 68¼"
CYL-V-510KD
10-20 60" x 32" x 68¼"
CYL-V-1020-KD
HORIZONTAL/VERTICAL STORAGE CABINETS
8H/10V 60" x 32" x 68¼"
CYL-H8-V510
CYL-H8-V510-KD 8H/10V 60" x 32" x 68¼"
CYL-V-510
CYL-H-4-KD
TYPE
NET WT. LIST PRICE
(POUND)
EACH
UNASSEMBLED
UNASSEMBLED
UNASSEMBLED
ASSEMBLED
ASSEMBLED
ASSEMBLED
ASSEMBLED
ASSEMBLED
UNASSEMBLED
UNASSEMBLED
ASSEMBLED
UNASSEMBLED
234
341
495
181
277
527
$542.00
831.00
1,442.00
$558.00
819.00
1,392.00
287
456
287
362
$767.00
1,203.00
$789.00
1,226.00
505
505
$1,692.00
1,765.00
Welding Cylinder Torch Carts
Designed for transporting cylinders and cutting torch. Includes two (2) tank compartments with heavy-duty ratchet straps. Brackets
are included for holding cutting torch and hose. Sturdy handles and large 16" diameter wheels for tilt-n-go portability. Heavy-duty
uniform capacity rating is 500 pounds. Convenient open-top storage tray included on all models, except models CYL-2 & CYL-2-FF.
CYL-2 models include lockable storage box for regulators. Box includes hose opening so regulator does not need to be disconnected
for storage. Lifting eye is 2" maximum diameter, material thickness is 7/16". Fork pockets for transportation is included on CYL-2
models. Usable size of each fork pocket is 77/8"W x 29/16"H. Units with fire protection include ½" (approximately 13mm) marinite 1
material which provides a 30 minute fire protection barrier as described by OSHA standards 1910.253 and 1926.350. Welded steel
construction with powder coat finish. Not designed for use as a storage means for gas cylinders. Models CYL-2-G & CYL-2-FF-G
feature a hot dipped galvanized finish.
CYL-2-FP
CYL-E
WHEEL
CUTTING
part no.
TYPE
TORCH BOX
CYL-E
PNEUMATIC
NO
CYL-E-FF
FOAM-FILLED
NO
CYL-EH
PNEUMATIC
NO
CYL-EH-FF
FOAM-FILLED
NO
CYL-EH-FP
PNEUMATIC
NO
CYL-EH-FP-FF FOAM-FILLED
NO
CYL-2
PNEUMATIC
YES
CYL-2-FF
FOAM-FILLED
YES
CYL-2-FP
PNEUMATIC
YES
CYL-2-FP-FF FOAM-FILLED
YES
CYL-2-G
PNEUMATIC
YES
CYL-2-FF-G
FOAM-FILLED
YES
OVERHEAD
LIFT EYE
NO
NO
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
FORK
POCKETS
NO
NO
NO
NO
NO
NO
YES
YES
YES
YES
YES
YES
OVERALL size
FIRE
NET Wt. LIST PRICE
(W x L x H)
PROTECTION (POUND) EACH
1 16
11 16
34¼" x 23 / " x 57 / "
NO
145
$426.00
35½" x 231/16" x 5711/16"
NO
133
459.00
34¼" x 231/16" x 66½"
NO
128
$659.00
35½" x 231/16" x 66½"
NO
122
692.00
34¼" x 231/16" x 66½"
YES
159 $1,198.00
35½" x 231/16" x 66½"
YES
195
1,229.00
36¼" x 28" x 691/8"
NO
248
$747.00
37½" x 28" x 691/8"
NO
273
780.00
36¼" x 28" x 691/8"
YES
277 $1,282.00
37½" x 28" x 691/8"
YES
234
1,315.00
36¼" x 28" x 691/8"
NO
272
$892.00
37½" x 28" x 691/8"
NO
275
925.00
Call Purity Cylinder Gases for more information 1-888-532-2375
TORCH BOX
CYL-2-G
Prices good through June 2015 or while supplies last!
Low Profile 90° Self-Dumping Steel Hoppers
Units feature a full 90° dump angle with a cushioned rubber bumper
stop. The low profile design is essential for convenient loading.
Dumping with a fork truck is quick and simple. A cable is pulled from
the seat of the fork truck to dump the hopper. The unit returns to an
upright and locked position when lowered to the ground. A locking
restraint is provided to secure the hopper to the fork truck. 22"L
usable fork pockets measure 7"W x 2"H on 22" centers. Powder
coat blue finish.
VOLUME
CAPACITY
part no.
CUBIC YARDS
LIGHT DUTY • 12 GAUGE STEEL
1
2,000 lb.
H-100-LD
1-1/2
2,000 lb.
H-150-LD
MEDIUM DUTY • 10 GAUGE STEEL
1
4,000 lb.
H-100-MD
1-1/2
4,000 lb.
H-150-MD
HEAVY DUTY • 8 GAUGE STEEL
1
6,000 lb.
H-100-HD
1-1/2
6,000 lb.
H-150-HD
OVERALL SIZE
(W x D x H)
FORK POCKET
CENTERS
NET WT.
(POUND)
LIST PRICE
EACH
49" x 51¼" x 28"
49" x 52" x 40"
22"
22"
347
374
$759.00
867.00
49" x 51¼" x 28"
49" x 52" x 40"
22"
22"
395
463
$778.00
961.00
49" x 51¼" x 28"
49" x 52" x 40"
22"
22"
462
540
$867.00
1,094.00
Lift Master
Booms
Fabricated from
structural steel with
welding to meet AWS.
Extends to 153" and
features an infinitely
adjustable locking
screw. Fork pockets measure 7½"W x 2½"H usable on 24"
centers. A 36" safety restraint secures the boom to the fork
truck for safe operation. Includes two lifting hooks.
PART NO.
LM-EBT-4-24
LM-EBT-6-24
CAPACITY
OVERALL SIZE
(W x D x H)
2,000 lb.
2,000 lb.
2,000 lb.
41¼" x 61" x 43"
56¼" x 69" x 52"
817/16" x 69" x 52"
18"
28"
28"
524
725
991
$806.00
1,019.00
1,648.00
6,000 lb.
6,000 lb.
6,000 lb.
41¼" x 61" x 43"
56¼" x 69" x 52"
817/16" x 69" x 52"
18"
28"
28"
622
777
991
$982.00
1,309.00
1,827.00
FORK POCKET NET WT. LIST PRICE
CENTERS
(POUND)
EACH
Portable Steel Hoppers make handling waste and bulk material
safer and more convenient. Fork truck entry tubes are designed to
move hopper over rough terrain (not to be used as a self-dumping
hopper). Usable fork pockets are 7" x 2". Foot operated caster
lock is included. Units tilt with assistance from operator handle for
dumping contents. Welded construction makes them durable. 8" x
2" glass filled nylon casters, two rigid and two swivel standard. 12
gauge steel. Powder coat blue finish.
PART NO.
P-HOP-0.5
P-HOP-1
P-HOP-1.5
2,000 lb.
2,000 lb.
2,000 lb.
OVERALL SIZE
FORK POCKET
(W x D x H)
CENTERS
11-5/8"
3413/16" x 52¼" x 375/8"
21-5/8"
5813/16" x 527/8" x 373/8"
21-5/8"
5813/16" x 533/8" x 493/8"
NET WT.
(POUND)
322
482
495
LIST PRICE
EACH
$770.00
831.00
870.00
Work Platforms
Convenient fork truck work platforms quickly and safely raise
maintenance personnel where they are needed. Attaches to fork
truck by inserting forks into fork pockets and securing the platform
to the truck with the included safety restraint. Tine lock must be
engaged to secure platform to forks. 42" high handrail with 21"
high midrail on three sides. 60" high expanded metal backing on
fourth side. Includes a treadplate floor to provide a safe, non-slip
grip. The usable fork pockets are 7-3/4"W x 3-7/8"H in rear and
7-3/4"W x 1-7/8"H in front. Capacity is 1,000 pounds. Welded steel
construction. Powder coat finish.
Emergency
Shut Off Kit
PART NO.
WP-3636
WP-3648
WP-4848
WP-CA
WP-SB
PLATFORM
SIZE (W x L)
36" x 36"
36" x 48"
48" x 48"
FORK POCKET
EXPANDED
CENTERS
METAL BACK
16"
60"
16"
60"
24"
60"
(4) Poly Casters
Emergency Shut Off Kit
Call Purity Cylinder Gases for more information 1-888-532-2375
NET WT.
(POUND)
200
230
275
24
9
LIST PRICE
EACH
$475.00
521.00
637.00
$90.00
359.00
LIST PRICE
EACH
$799.00
1,162.00
SINGLE FORK
ATTACHMENT
FORK POCKET
PART NO.
SIZE (W x H)
SINGLE FORK ATTACHMENT
6" x 2¼"
S-FORK-4/6-S
S-FORK-4/6-R
6" x 2¼"
DOUBLE FORK ATTACHMENT
613/16" x 2½"
D-FORK-4-S
613/16" x 3½"
D-FORK-10-S
DOUBLE FORK
ATTACHMENT
CAPACITY
NET WT. LIST PRICE
(POUND)
EACH
4,000 lb.
4,000 lb.
18
18
$98.00
90.00
4,000 lb.
10,000 lb.
41
46
$213.00
375.00
Fork Extensions
Provide the extra support
needed to lift long or large
objects with a fork truck.
Welded steel construction
with cast steel tips. Steel
retaining strap prevents fork
extensions from sliding off forks during use. Maximum fork
thickness is 2". Powder coat yellow finish. OSHA regulations
require that extensions are no more than 150% of the existing
fork length. Additional sizes available.
Portable Steel Hoppers
CAPACITY
4,000 lb.
6,000 lb.
NET WT.
(POUND)
370
440
Convert your fork truck into a swivel hook in a matter of
seconds. The easy to attach Hoisting Hook does not require
the assistance of special tools. Secured to the fork truck
by means of a 36" long safety restraint and screw clamps.
Available in single or double fork design. All units are zinc
plated. Swivel hook with shackle included (model S-FORK-4/6-R
has a rigid hook).
Hopper automatically dumps when bumper release contacts side
of dumpster. Hopper returns to an upright and locked position
automatically after it dumps. Also includes a cable that may be
operated from the seat of the fork truck to manually dump the hopper.
A safety restraint is provided to secure the hopper to the fork truck.
Usable fork pockets are 7½"W x 2½"H. Powder coat blue finish.
VOLUME
CUBIC YARDS
½
1
1½
CAPACITY
Hoisting Hooks
Self-Dumping Steel Hoppers
with Bumper Release
VOLUME
PART NO.
CUBIC YARDS
LIGHT DUTY • 12 GAUGE STEEL
1
D-100-LD
2
D-200-LD
3
D-300-LD
HEAVY DUTY • 8 GAUGE STEEL
1
D-100-HD
2
D-200-HD
3
D-300-HD
OVERALL
HEIGHT
13"
13"
USABLE
INSIDE
NET WT. LIST PRICE
PART NO. FORK WIDTH WIDTH LENGTH (POUND)
PAIR
4"
4½"
63"
101
FE-4-63
$270.00
4"
4½"
72"
125
FE-4-72
292.00
5"
5½"
63"
135
FE-5-63
$281.00
5"
5½"
72"
173
FE-5-72
303.00
Fork Mounted Front Loader
The Front Loader is engineered for use with your fork
truck. “Dust Pan” design is ideal for transporting snow,
gravel, sand or refuse. Holds 1-1/3 cubic yard capacity.
Pull release cable to dump contents of scoop 90°.
Fabricated from steel. Attaches quickly and easily to most
fork trucks. Beveled front edge for better scooping ability.
The usable fork pockets measure 7½"W x 2½"H on 24"
centers. Durable powder coat finish.
PART NO.
FL-4000
OVERALL SIZE
(W x D x H)
69¾" x 621/8" x 211/8"
CAPACIT
4,000 lb.
NET WT.
(POUND)
650
LIST PRICE
EACH
$1,770.00
Prices good through June 2015 or while supplies last!
Adjustable Height Steel Gantry Cranes
Rugged steel construction will provide years of service. Large 8" diameter swivel glass filled nylon casters with roller
bearings will facilitate easy mobility from one area to another. Casters include four-way position swivel locks. More
economical and flexible than permanent cranes. Deduct 12" from overall span for distance between uprights. Travel trolley
length is overall span minus 30". Height is adjustable in 6" increments. Hoist and trolley sold separately.
PART NO.
AHS-2-15-12
AHS-4-15-12
AHS-6-15-12
OVERALL BEAM
LENGTH / HEIGHT
15' / 6"
15' / 8"
15' / 10"
CAPACITY
2,000 lb.
4,000 lb.
6,000 lb.
UNDER I-BEAM
USABLE HEIGHT
7'6" to 12'
7'6" to 12'
7'7" to 12'1"
STRADDLE
WIDTH
77"
77"
78"
FLANGE
WIDTH
3"
6"
5"
NET WT.
(POUND)
976
1059
1298
LIST PRICE
EACH
$2,346.00
2,503.00
2,761.00
ADJUSTABLE
HEIGHT
Adjustable Height Aluminum Gantry Cranes
Heavy duty aluminum construction for years of dependable use. Entire unit is pinned and bolted together for easy
assembly and portability. Glass filled nylon casters are ideal for use on smooth surfaces. Hoists and trollies are sold
separately. All units comply with applicable CMAA and ANSI specifications. Deduct 12" from overall I-Beam length for
distance between uprights. Travel trolley length is overall I-Beam length minus 20". Height is adjustable in 6" increments.
PART NO.
AHA-2-10-10
AHA-2-10-12
AHA-4-10-10
AHA-4-10-12
OVERALL BEAM
LENGTH / HEIGHT
10' / 6"
10' / 6"
10' / 8"
10' / 8"
CAPACITY
2,000 lb.
2,000 lb.
4,000 lb.
4,000 lb.
UNDER I-BEAM
USABLE HEIGHT
7'8" to 10'2"
9'6" to 12'
7'8" to 10'2"
9'6" to 12'
STRADDLE
WIDTH
53¾"
53¾"
5315/16"
5315/16"
FLANGE
WIDTH
35/16"
35/16"
43/16"
43/16"
Quick Install Manual Trollies
Designed to easily adjust to the width of virtually any S, H, W and
M type I-beam. Width is adjusted with manual screw mechanism.
Includes locking ring to prevent trolley width from changing
accidentally. Includes four rollers with sealed bearings for long life.
A lifting eye is located at the bottom of the trolley for attaching a
hoist (not included). Steel construction and powder coat finish.
PART NO.
QIT-1
QIT-2
QIT-4
FITS BEAM
FLANGE WIDTH
3" to 5"
3" to 5"
3" to 7½"
CAPACITY
1,000 lb.
2,000 lb.
4,000 lb.
NET WT.
(POUND)
15
20
25
PART NO.
LPC-20
LPC-40
LPC-60
THROAT
DEPTH
2.30"
2.95"
3.34"
LIST PRICE
EACH
$116.00
127.00
178.00
BALE
OPENING
1.75"
2.2"
1.9"
PART NO.
BOL-42-4.5
BOL-42-5.5
NET WT.
(POUND)
12
25
32
WTJ-2
WTJ-4
Guard Rail Systems
LIST PRICE
EACH
$298.00
392.00
472.00
HPRO-36-42-4
HPRO-48-24-4
LPRO-48-9-4
LPRO-48-16-4
DESCRIPTION
4' Long Galvanized Guard Rail
6' Long Galvanized Guard Rail
8' Long Galvanized Guard Rail
18" High Tubular Post
Plastic End Cap
ADJUSTABLE NET WT. LIST PRICE
HEIGHT
(POUND)
EACH
0 TO 105"
135
$277.00
13" TO 90½"
0 TO 77½"
145
$346.00
12" TO 70"
NET WT.
(POUND)
44
66
89
41
7
LIST PRICE
EACH
$98.00
108.00
42"
39½"
24"
9"
16"
51½"
51½"
51½"
4½"
4½"
4½"
4½"
HPRO
LPRO
NET WT.
(POUND)
53
89
69
60
73
LIST PRICE
EACH
$143.00
174.00
169.00
$156.00
176.00
Pipe Safety Railings
Protect personnel and equipment both visually
and physically with our Guard Rail Systems.
These economical systems can be utilized indoors
or outdoors. Ideal for protecting corners of buildings and
machinery from fork truck and vehicle damage. Choose
between one, two, or three rail high systems. Tubular posts
are machined for continuous or perpendicular rail mounting.
PART NO.
GR-4
GR-6
GR-8
GR-TP18
GR-CAP
NET WT.
(POUND)
36
72
Heavy-duty steel construction for protecting racks,
building walls, expensive equipment and hundreds
of other applications. All 42” high units include a 21”
midrail to comply with OSHA handrailing requirements.
Two base plates with four pre-drilled
mounting holes in each plate. Welded steel
construction. High visibility yellow powder
coat finish.
OUTSIDE
PART NO.
HEIGHT
LENGTH
DIAMETER
24"
39½"
4½"
HPRO-36-24-4
Installed in your pick-up truck bed, this winch
operated jib crane will help lift loads up to 1,000 lbs.
Lift items from ground to truck bed height, then rotate
into cargo area. Includes telescopic boom design with
manual hydraulic hand pump to pivot boom up and
down. Manual cable winch (with ¼" cable diameter)
to lift and lower loads. Mounting plate is 10½" by
10½". Base height is 12½". The crane swivels on
a 360° base. Safety yellow in color. Welded steel
construction.
CAPACITY
BOOM
REACH
EXTENDED
500 lb.
491/4"
RETRACTED 1,000 lb. 32¾"
EXTENDED 1,000 lb.
46"
RETRACTED 2,000 lb.
31"
OUTSIDE
DIAMETER
4½"
5½"
HEIGHT
42"
42"
Machinery & Rack Guards
Winch Operated Truck Jib Crane
PART NO.
ADJUSTABLE
HEIGHT
Bollards can be used both indoors and outdoors to protect work
areas, racking and personnel. Powder coated safety yellow finish.
Molded rubber caps are removable. Base plate measures 8" x 8",
and include four (4) pre-drilled mounting holes. Mounting kits and
replacement caps available. Welded steel construction.
Grips sheet until release ring is pulled. Serrated gripper is hardened
tool steel. Forged head and gear. Safety factor is 2 to 1. Power
coated finish. Designed to meet ASME B30.20 standards. Do not
use plate clamps to lift loads less than 20% of rated capacity. Lift
only one plate at a time. Plate must be clean and free of oil.
WORKING
LOAD
LIMIT
2,000 lb.
4,000 lb.
6,000 lb.
LIST PRICE
EACH
$3,030.00
3,191.00
4,686.00
5,078.00
Steel Pipe Safety Bollard
Positive Locking Plate Clamps
MAXIMUM
PLATE
THICKNESS
0.80"
1.1875"
1.5625"
NET WT.
(POUND)
200
209
309
335
Protect people from uneven walkways and mezzanine
drop off's. These durable railings are made of schedule
40 pipe (15/8" O.D.). Handrails are 42"
high with a 21" midrail. The optional
cast steel sockets accept wood 2" x 4"
or 2" x 6" when toe boards are required.
Powder coat safety yellow finish.
PART NO.
VDKR-6
VDKR-7
VDKR-8
VDKR-P101
VDKR-P102
TOP RAIL
HEIGHT
42"
42"
42"
MIDRAIL
OUTSIDE
HEIGHT LENGTH DIAMETER
21"
72"
15/8"
21"
84"
15/8"
21"
96"
15/8"
SINGLE SOCKET
DOUBLE SOCKET
Crowd Control Interlocking Barriers
LIST PRICE
EACH
$65.00
97.00
136.00
$98.00
46.00
Call Purity Cylinder Gases for more information 1-888-532-2375
Lightweight one-piece handrail is attractive and functional.
Interlocking portable railing has many commercial and
industrial applications. Upright bars are vertically spaced at
5-7/8" intervals. Includes connectors to attach multiple units
together to form long runs.
NET WT.
(POUND)
38
43
48
7
12
LIST PRICE
EACH
$101.00
106.00
117.00
$32.00
47.00
PRAIL-102-Y
PRAIL-102-G
RAIL
NET WT. LIST PRICE
PART NO.
FINISH
HEIGHT LENGTH DIAMETER (POUND)
EACH
5 8
/"
56
GALVANIZED
395/16" 10013/16"
$94.00
PRAIL-102-G
102"
1¼"
56
114.00
PRAIL-102-Y YELLOW POWDER COAT 395/16"
Prices good through June 2015 or while supplies last!
Electric Hydraulic Scissor Lift Tables
Lite Load Lifts
Electric hydraulic scissor lift tables are used by all
types of manufacturing and warehouse facilities. Safety
features include: electric toe guard, brass velocity fuse,
push-button hand control, maintenance prop, and upper
travel limit switch. 2HP, 460V, 3 phase, 60 Hz totally
enclosed motor standard. 3000 psi hydraulic component
rating. Other sizes available.
PART NO.
EHLT-4048-3-43
EHLT-4848-3-43
PLATFORM
(W x L)
40" x 48"
48" x 48"
SERVICE
RANGE
8" to 43"
8" to 43"
Lift and transport loads from delivery trucks to docks or use to
inventory items on storage systems. Units roll smoothly on 4" x 2"
mold-on-rubber rear wheels with 2" steel front wheels. Located on
the handle are two rollers to ease loading into delivery trucks. The
platform lifts approximately 1" per winch rotation. Horizontal load
center is 10". Low Profile units have 2" high side lips and a deck
height of 1/4" for easy loading. Capacity 400 lbs.
NET WT.
(POUND)
800
825
CAPACITY
3,000 lb.
3,000 lb.
LIST PRICE
EACH
$2,998.00
2,998.00
Portable ergonomic elevating carts minimize
worker bending and lifting. Foot pump includes
a soft-lowering down valve.
CART-400 has a single speed foot pump while the
others include a two speed foot pump. Move
easily on four polyurethane casters, two swivel
with brakes and two rigid. All models feature an
internal hydraulic velocity fuse in each cylinder.
CART-1000-TS
Steel construction.
PLATFORM
SERVICE
CAPACITY
(W x L)
RANGE
17½" x 27½" 400 lb.
8¾" to 29"
20" x 35½"
800 lb. 15½" to 50¾"
19¾" x 32" 1,000 lb. 15½" to 35½"
CART-800-D-TS
NET WT.
(POUND)
108
330
205
LIST PRICE
EACH
$420.00
915.00
758.00
This lightweight yet strong tubular frame design
handles evenly distributed loads. Large wheels
allow for movement over most surfaces. Use at
construction sites, gravel pits, and nurseries.
Features large 16" front pneumatic tires and 10"
pneumatic steering wheels. Individual forks are
4"W x 2"H (4¾"W on model ALL-T-HD). Easy to
operate with three position handle, UP, DOWN,
and NEUTRAL. Service range is 3" to 9".
ADJUSTABLE FORK
FORK WIDTH LENGTH
2,000* 9½" to 26"
32"
2,000** 9½" to 26"
48"
2,500*** 12" to 26¾" 32"
CAPACITY
OVERALL SIZE NET WT. LIST PRICE
(W x L)
(POUND)
EACH
63¾" x 49" 51"
325
$846.00
65" x 63" x 51"
372
1,212.00
64" x 50" x 51"
519
1,327.00
*2,000 lb. at 12" horizontal load center, 1,500 lb. at 15" and 750 lb. at 24"
**2,000 lb. at 24" horizontal load center, 1,500 lb. at 27" and 1,000 lb. at 30"
***2,500 lb. at 12" horizontal load center, 2,000 lb. at 15" and 1,500 lb. at 24"
Traction-Drive Carts
NE-CART-1
Unique carts feature built-in traction-drive system
for easy transportability. Features 500W electric
drive motor with two 12V, 95Ah batteries for power.
115V AC-powered on-board battery charger is
included. Variable throttle speed control for precise
maneuvering and positioning is located in the
handle. Units roll smoothly on (2) 9" non-marking
solid foam steering wheels and (2) 10¼" drive
wheels. Slow travel speed is 0-1.5 mph when
unloaded and 0-2.5 mph when loaded. Handle
pivots back towards operator and includes horn and
emergency stop.
DECK SIZE
(W x L)
28" x 48"
24¾" x 46"
24¾" x 46"
24¾" x 46"
PART NO.
NE-CART-1
NE-CART-2
NE-CART-3
NE-CART-4
NO. OF
SHELVES
1
1
2
3
NE-CART-2
NE-CART-3
OVERALL
CAPACITY
750 lb.
750 lb.
500 lb.
400 lb.
NET WT.
(POUND)
324
406
429
442
LIST PRICE
EACH
$2,293.00
2,493.00
2,626.00
2,764.00
The Panel Cart is perfect for handling items such as sheets
of paneling, plywood, doors and lumber. A convenient,
removable plastic basket is included for carrying smaller
items and tools. Rollers are provided on one end for easy
loading and unloading. Two rigid and two swivel 4" x 2"
phenolic casters are included. Ships knockdown, assembly
required. Steel construction. Powder coat blue finish.
DECK SIZE
(W x L)
26" x 30"
CAPACITY
2,000 lb.
CASTER
SIZE
4" x 2"
176
$573.00
Quiet and lightweight unit transports and
positions loads quickly with just a push of
a button. High density 23½"W x 18½"L
polyethylene platform makes these lifts ideal
for clean room operations. 9" horizontal
load center. Service range 5-1/2" to 57".
Capacity 175 lbs. Poly casters; two swivel and
two-swivel locking. 24V battery with 115V ACpowered on-board charger.
PART NO.
PEL-88
PEL-88-A
PEL-HC
NET WT. LIST PRICE
CONSTRUCTION (POUND)
EACH
STEEL
225
$2,102.00
ALUMINUM
150
2,270.00
Detachable Hand Control
$110.00
PEL-88
PEL-88-A
Hefti-Lifts
NET WT.
(POUND)
174
PART NO.
HYD-5
HYD-10
PLATFORM
(W x L)
23" x 24"
23" x 24"
SERVICE
NET WT. LIST PRICE
CAPACITY
RANGE
(POUND)
EACH
3½" to 44"
880 lb.
245
$749.00
3½" to 59"
880 lb.
275
861.00
Hand Winch Lift Trucks
Compact lift trucks are used to lift material to and
from shelves, move office equipment and install
ceiling/wall appliances. Constructed of durable
steel-and-aluminum. The rugged 4" wide by 1¾" thick
steel forks measure 20½" wide by 22" long overall.
Operated by a hand-crank winch that features
a reversible handle and a hold-down device for
securing the carriage during transport. Forks can be
inverted to provide two different heights. Two 8" nonSTRADDLE DESIGN
marking rear wheels, two 2" front swivel casters.
Straddle Design: Adjustable straddle width: 21¾" to
36¼" (I.D.) and 28¾" to 43½" (O.D.). Overall size:
43¼"W x 42½"L x 68"H.
Standard Design: Fixed straddle width: 12¾" (I.D.)
STANDARD DESIGN
and 21" (O.D.). Overall size: 25"W x 35"L x 67½"H.
LOWERED HEIGHT RAISED HEIGHT
CAPACITY
PART NO.
FORKS DOWN/UP FORKS DOWN/UP
STRADDLE DESIGN
500 lb.
1¼" / 21¼"
47" / 67"
A-LIFT-S
400 lb.
1¼" / 21¼"
97" / 117"
A-LIFT-S-HP
STANDARD DESIGN
500 lb.
3½" / 23½"
47" / 67"
A-LIFT-R
400 lb.
3½" / 23½"
97" / 117"
A-LIFT-R-HP
LIST PRICE
EACH
$385.00
Call Purity Cylinder Gases for more information 1-888-532-2375
NET WT. LIST PRICE
(POUND)
EACH
140
145
$795.00
886.00
136
140
$748.00
864.00
Mobile Tilting Work Tables
Designed to bring work to an ergonomically
correct position. Platform height and tilt
angle are manually adjustable. Four 3½”
x 1¼” polyurethane swivel casters (two
double locking) allow unit to be transported
from one work area to another while loaded.
All steel construction.
WT-2424
Panel Cart
PART NO.
PRCT
20" x 20" ¼" to 55"
User-friendly portable hydraulic lifts provide reliable,
powerful lifting when moving and positioning loads.
Includes removable chrome platform for operations
requiring forks. Manual hydraulic foot pump yields ¾"
of platform travel per stroke. Units roll easily on two
rigid and two swivel poly-on-steel casters and include a
foot operated brake. Not for use with pallets. Each fork
is 4-3/8"W x 2½"H, the fork length is the same as the
platform length. Overall fork width is 21¾".
All Terrain Pallet Trucks
PART NO.
ALL-T-2
ALL-T-2-48
ALL-T-HD
LLPW-500-FW
DC Powered Quick Lifts
Hydraulic Elevating Scissor Carts
PART NO.
CART-400
CART-800-D-TS
CART-1000-TS
PLATFORM SERVICE NET WT. LIST PRICE
(W x L)
RANGE (POUND)
EACH
PART NO.
PART NO.
WT-2424
WT-2221
PLATFORM
(W x L)
24" x 24"
22" x 21"
SERVICE PLATFORM
CAPACITY
RANGE*
TILT
31½" - 42"
30°
300 lb.
28" - 38"
45°
150 lb.
*SERVICE RANGE WITH PLATFORM IN LEVEL POSITION
WT-2221
NET WT.
(POUND)
120
85
LIST PRICE
EACH
$615.00
279.00
Prices good through June 2015 or while supplies last!
Fork Mounted Drum Carrier/Rotator
Automatic Eagle Beak™
Drum Lifters
This product allows you to easily transport and rotate
55 gallon steel drums using a fork truck. Drums are
held securely in place by a durable chain locking
system. Each unit is provided with a 15 foot long
chain to allow the drum to be rotated up to 360°
from the fork truck operator's seat. Fork pockets
measure 7½" wide by 2½" high usable. Safety
restraint is used to secure unit to fork truck. A Bung
Nut Wrench is also included for opening and closing
drums. Drums must be full to rotate at rated capacity.
CRANK TURNS
PER 90° ROTATION
10
10
PART NO.
DCR-205-8
DCR-205-15
NET WT.
(POUND)
221
259
CAPACITY
800 lb.
1,500 lb.
LIST PRICE
EACH
$659.00
806.00
Fork Mounted Drum Gripper
For use with both 30 and 55 gallon steel drums.
Heavy-duty welded steel construction. Powder
coat finish. Arms fold up for storage purposes.
Available for one or two drums.
NUMBER
PART NO. OF DRUMS
1
DGS-A
2
DGD-A
CAPACITY
800 lb.
1,500 lb.
NET WT.
(POUND)
72
96
LIST PRICE
EACH
$371.00
500.00
NET WT.
(POUND)
38
CAPACITY
1,000 lb.
LIST PRICE
EACH
$119.00
LIST PRICE
EACH
$364.00
336.00
PART NO.
OCTO-55
DRUM--HD
CAPACITY
800 lb.
ACCEPTABLE
DRUM TYPES
55 GALLON
55 GALLON
880 lb.
LIST PRICE
EACH
$888.00
NET WT.
(POUND)
20
LIST PRICE
EACH
$146.00
CASTER
TYPE
CAST IRON
PHENOLIC
OCTO-55
DRUM-HD
CAPACITY
2,000 lb.
2,000 lb.
NET WT.
(POUND)
51
57
LIST PRICE
EACH
$110.00
109.00
Round steel drum dolly designed exclusively for
55 gallon drums. Tilts drums 10° for better liquid
extraction. Tilting feature is foot-operated and
locks into place when activated. Dolly includes
four swivel casters for maximum maneuverability.
Patent pending.
LIST PRICE
EACH
$106.00
190.00
137.00
156.00
$22.00
PART NO.
DRUM-QUAD-C-TLT
DRUM-QUAD-H-TLT
Practical design is easy to operate and
features a capacity of 1,000 lbs. Includes two
rigid and two swivel casters. Two retractable
wooden handles included for easy operation.
Steel handle also included for holding drum
during tipping operation. Steel handle includes
built-in bung nut wrenches as a bonus.
Shipped unassembled.
NET WT.
(POUND)
27
32
6
2
NET WT.
(POUND)
170
CAPACITY
Tilting Drum Dolly
Deluxe Rotating Drum Carts
DESCRIPTION
5" POLY-ON-STEEL
5" Polyolefin
5" Steel
Optional Drip Pan
JAW SERVICE
RANGE
30¼" TO 47"
The Octo Drum Dolly, model OCTO-55, rolls on (8) 4"
x 1¼" cast iron swivel casters for maximum stability.
Transport 55-gallon drums with the Heavy-Duty Drum
Dolly, model DRUM-HD. Transport your heavier
drums from location to location. (4) 4" x 2" locking
swivel phenolic casters with brakes standard.
Easy to operate. Includes two rigid and two swivel
casters. Handle is NOT included -- must be purchased
separately. Handle includes built-in drum tipper and
bung nut wrenches as a bonus. Capacity 800 lbs.
Shipped unassembled.
PART NO.
RDC-1000-5PU
RDC-1000-5PO
RDC-1000-5SS
RDC-1000-DPN
LIST PRICE
EACH
$913.00
1,251.00
Octo & Heavy Duty Drum Dollies
Economy Rotating Drum Carts
DESCRIPTION
None
5" POLYURETHANE
5" Polyolefin
5" Steel
Optional Handle
1,000 lb.
2,000 lb.
NET WT.
(POUND)
240
340
Simple three-arm design for use with closed head 30 and
55 gallon steel, plastic and fiber drums with a top lip. Each
removable arm also functions as a wrench for use on drum
plugs, faucets and rim ring bolts. Mechanical operation.
Requires assistance from an overhead lifting device.
Durable powder coat finish. Steel construction.
PART NO.
PDL-800-M
NET WT.
(POUND)
27
32
32
34
6
OVERALL SIZE
(W x L x H)
26½" x 46½" x 29"
42" x 49½" x 29"
CAPACITY
Overhead Drum Lifter/Wrench
Hand truck designed for moving steel and fiber 55 gallon drums.
Spring allows for easier tilting of fully loaded drums. Removable
hook bar includes built-in bung nut wrenches. Steel construction
with powder-coat yellow finish.
PART NO.
RDC-60-NC
RDC-60-5-PU
RDC-60-5-PO
RDC-60-5-SS
RDC-60-HDL
NUMBER
OF DRUMS
1
2
PART NO.
DCR-880-M
Drum Truck with Spring Assist
WHEEL
NET WT.
PART NO.
TYPE
(POUND)
58
DBT-SA-MR Mold-On-Rubber
Poly-On-POLY
61
DBT-SA-PO
PART NO.
FMDL-1
FMDL-2
FMDL-2
Designed to lift and transport plastic, steel and fiber drums.
Steel jaws securely grip the top lip of the drum. Manual
mechanical ratchet lift mechanism. Straddle legs rotate
for access to drums on pallets. Unit rolls on (4) 8" x 2"
glass filled nylon casters, front casters are lockable to rigid
position. The push handle folds down for easy access
to ratchet and foot pump. All welded steel construction.
Powder coated finish.
Reduce injuries caused by manually lifting and
moving drums. Transport (1) 55 or 30 gallon drum
or (2) 5 gallon pails. Unit rolls easily on two 6" x 2"
rigid mold-on-rubber wheels and one 3" x 1" swivel caster.
The removable handle doubles as a bung nut wrench and
seal remover. Cradle height is ½". Inside cradle diameter is
23½”. Steel construction.
STRADDLE
(W x D)
281/8" x 211/16"
This time tested and proven design allows a
fork truck operator to easily secure, move and
release drums without leaving the seat of the
fork truck. For use with open and closed head 30
and 55 gallon plastic, steel and fiber drums with
a top lip strong enough to support the weight of
the drum. Choose single-drum or double-drum
configuration. Includes safety restraint to secure
unit to the fork truck. Welded steel construction.
Powder coat finish. Fork pockets measure 7½"
wide x 2½" high usable.
Mechanical Drum Transporters
DGS-A
Lo-Profile Drum Caddies
with Bung Wrench Handle
PART NO.
LO-DC-MR
FMDL-1
WHEEL
TYPE
CAST IRON
NET WT.
(POUND)
1,200 lb.
28
CAPACITY
HARDRUBBER 900 lb.
28
LIST PRICE
EACH
$126.00
110.00
Drum Bung Nut Wrenches
These multipurpose drum tools not only
open and close drum bungs or plugs, they
also work as a bung wrench, ring wrench
and faucet wrench all in one! Wrenches are
universal in that they fit all types of industrial
drum plugs and bungs in metal or plastic.
LIST PRICE
EACH
$228.00
196.00
201.00
$46.00
OPTIONAL
DRIP PAN
Call Purity Cylinder Gases for more information 1-888-532-2375
PART NO.
BNW-A
BNW-B-W
BNW-IX-W
BNW-A
DESCRIPTION
NON-SPARKING ALUMINUM
NON-SPARKING BRONZE ALLOY
POLISHED ZINC CAST STEEL
BNW-B-W
BNW-IX-W
NET WT.
(POUND)
1
6
2
LIST PRICE
EACH
$16.00
94.00
27.00
Prices good through June 2015 or while supplies last!
Horizontal Sheet Rack
Medium-Duty Cantilever Racks
Designed for storage of sheet goods and similar
materials. Five shelf design allow for generous
storage of multiple thickness materials. Distance
between shelves is 9½". All welded steel frame
allows for 2,000 pound capacity per shelf. Four
sided access when using 4' x 8' sheet or smaller.
Supplied with lag down points.
OVERALL SIZE
(W x H x L)
54½" x 48" x 102¾"
PART NO.
SHEET-R-57
NUMBER OF
SHELVES
5
NET WT.
(POUND)
564
LIST PRICE
EACH
$1,328.00
Variable Height Sheet Racks
Store various sizes of sheet goods in the vertical position
for easy viewing of stock. These sheet racks are perfect
for use with multiple sizes of material. Four different bays
with heights from 16" to 42" increase visibility of stored
materials. Capacity per bay is 1,500 lbs. Unit is supplied
with lag down points. Powder coat blue finish.
PART NO.
OVERALL SIZE
(W x D x H)
NUMBER
OF BAYS
VHSR-4
467/8" x 36" x 41¾"
4
DISTANCE
BETWEEN
BAYS
67/8"
NET WT.
(POUND)
200
PRICE LIST
EACH
$643.00
Long Bar Pigeon Hole Rack
Five-hole high and three-hole wide frame allows for
easy identification and retrieval of materials. Frames
are held in place by separator and bracing bars. 7,700
lbs. capacity per frame. Extension bay kit, model
LBPH-EXT, consists of one frame and one set of cross
braces for joining to the starter set. Capacity is 2,000
pounds per level or 7,700 per frame. Steel construction.
Number of bays is 15.
PART NO.
LBPH-77
LBPH-EXT
DESCRIPTION
STARTER UNIT
EXTENSION BAY KIT
OVERALL SIZE
(W x D x H)
48½" x 60" x 48"
48½" x 60" x 48"
NET WT.
(POUND)
260
167
LIST PRICE
EACH
$925.00
600.00
Vertical Storage Rack
Designed for vertical storage of tubing and pipe. Each
rack has (4) bays that measure 9¾" wide each and
handle a capacity of 1,500 lbs. per bay. A restraint chain
securely holds items in storage bays. Fully welded steel
construction with powder coat blue finish. Unit is shipped
with lag down points.
PART NO.
SSRT-47
OVERALL SIZE
(W x D x H)
48½" x 24" x 61"
NET WT.
(POUND)
234
LIST PRICE
EACH
$519.00
Designed for the vertical storage of sheet goods.
Standard unit comes with four bays. Intermediate
floor bracing gives added steel support while
keeping material off the floor. Capacity per bay is
1,500 lbs. Unit is supplied with lag down points.
Powder coat finish.
OVERALL SIZE
(W x L x H)
50" x 84" x 44"
NUMBER
OF BAYS
4
DISTANCE
BETWEEN BAYS
10"
NET WT. LIST PRICE
(POUND)
EACH
400
$1,207.00
Designed for easy handling of bar stock,
pipe and tubing. Cradles are supported by
structural channel on the bottom and sides.
Cradles accept large bundles of stock. Swivel
casters at each end and a tilt pattern permit
the truck to turn in its own radius. Capacities
based on evenly distributed loads.
OVERALL SIZE
(W x H x L)
30" x 30" x 60"
30" x 30" x 96"
317/16" x 323/8" x 631/16"
317/16" x 323/8" x 991/16"
317/16" x 323/8" x 1231/16"
PART NO.
HEIGHT
96"
MU-C-8-12
96"
MU-C-8-24
96"
MU-C-8-36
DOUBLE-SIDED UPRIGHTS
BASE
253/8"
37"
493/8"
MAX. ARM
NET WT. LIST PRICE
CAPACITY
LENGTH
(POUND)
EACH
12"
7,600 lb.
150
$293.00
24"
5,300 lb.
160
347.00
30" / 36" 4,500 / 4,000 lb.
170
366.00
PART NO.
HEIGHT
96"
MDU-C-8-12
96"
MDU-C-8-24
96"
MDU-C-8-36
BASE
34"
58"
82"
MAX. ARM
NET WT. LIST PRICE
CAPACITY
LENGTH
(POUND)
EACH
12"
15,200 lb.
165
$336.00
24"
10,600 lb.
185
465.00
30" / 36" 9,000 / 8,000 lb.
210
488.00
STRAIGHT ARMS
CAPACITY
PART NO.
1,000 lb.
MSA-C-12
600 lb.
MSA-C-24
400 lb.
MSA-C-36
INCLINED ARMS
LENGTH
12"
24"
36"
NET WT.
(POUND)
11
15
19
LIST PRICE
EACH
$28.00
32.00
40.00
CAPACITY
PART NO.
1,000 lb.
MIA-C-12
600 lb.
MIA-C-24
400 lb.
MIA-C-36
BRACE SETS (includes two)
LENGTH
12"
24"
36"
NET WT.
(POUND)
11
15
19
LIST PRICE
EACH
$32.00
36.00
47.00
NET WT.
(POUND)
42
52
66
LIST PRICE
EACH
$96.00
118.00
139.00
PART NO.
MB-C-8-48
MB-C-8-72
MB-C-8-96
WIDTH
47"
71"
95"
CAPACITY
4,000 lb.
4,000 lb.
10,000 lb.
10,000 lb.
10,000 lb.
NET WT. LIST PRICE
(POUND)
EACH
203
$757.00
239
899.00
259
1,005.00
330
1,228.00
442
1,363.00
Call Purity Cylinder Gases for more information 1-888-532-2375
straight
arms
INCLINED
arms
BRACE SET
Heavy-Duty Cantilever Racking
Long, unwelded stock is handled quickly and efficiently
by forklift; instant accessibility to one piece or a full load.
Arms are adjustable up and down the length of the upright
wherever there are pre-drilled holes. All arms feature lips
to prevent product from falling off. All components sold
separately. Uprights and arms are sold separately, not in
pairs. Custom rack systems available, contact factory for
more information.
SINGLE-SIDED UPRIGHTS
BASE
28¼"
36½"
48½"
MAX. ARM
CAPACITY
LENGTH
18"
24,400 lb.
24"
20,900 lb.
30"/36" 17,800/15,600 lb.
NET WT.
(POUND)
340
348
370
LIST PRICE
EACH
$764.00
800.00
813.00
PART NO.
HEIGHT BASE
46"
HDU-C-12-18 144"
58"
HDU-C-12-24 144"
82"
HDU-C-12-36 144"
MAX. ARM
CAPACITY
LENGTH
18"
48,800 lb.
24"
41,800 lb.
30"/36" 35,600/31,200 lb.
NET WT.
(POUND)
350
385
430
LIST PRICE
EACH
$720.00
752.00
836.00
STRAIGHT ARMS
PART NO.
HSA-C-18
HSA-C-24
HSA-C-36
INCLINED ARMS
Heavy Duty Cradle Carts
PART NO.
DCC-2860-4
DCC-2896-4
DCC-2860-10
DCC-2896-10
DCC-28120-10
SINGLE-SIDED UPRIGHTS
PART NO.
HEIGHT
144"
HU-C-12-18
144"
HU-C-12-24
144"
HU-C-12-36
DOUBLE-SIDED UPRIGHTS
Standard Sheet Rack
part no.
VSSR-15
SINGLE-Sided
(shown with arms
Ideal for manual loading; open design allows easy forklift
and brace set)
accessibility. Store bar stock, pipe, tubing, lumber, and other
light hard-to-stock items that must be kept off the floor. Arms are
adjustable up and down the full length of the upright. All arms
feature lips to prevent product from falling off. All components
sold separately. Uprights are sold separately, not in pairs. Custom
rack systems can be designed for your special application.
CAPACITY
2,500 lb.
2,000 lb.
1,200 lb.
CAPACITY
PART NO.
2,500 lb.
HIA-C-18
2,000 lb.
HIA-C-24
1,200 lb.
HIA-C-36
BRACE SETS (includes two)
PART NO.
HB-C-14-4
HB-C-14-6
HB-C-14-8
WIDTH
48"
72"
96"
LENGTH
18"
24"
36"
NET WT.
(POUND)
16
19
24
LIST PRICE
EACH
$37.00
43.00
52.00
LENGTH
18"
24"
36"
NET WT.
(POUND)
16
19
24
LIST PRICE
EACH
$44.00
45.00
55.00
NET WT.
(POUND)
54
84
107
LIST PRICE
EACH
$117.00
213.00
265.00
Prices good through June 2015 or while supplies last!
Cross-Over Ladders
Semi-Automatic Stretch Wrap Machine
Mount where you need permanent access at
crossover points. The upper platform features
removable two sided 42" high handrail with 21"
midrail and fixed 4" toeboards. Serrated steps are
24" wide and 7" deep with a step height of 10". Legs
include rubber feet for stability. Capacity is 500 lbs.
Meets OSHA and ANSI A14.7 standards.
50" diameter powered turntable and counter-balanced stretch film
mast. Easy to operate, simply depress the foot pedal and manually
move the mast up and down. Powered by a 115V, 1/2 HP motor
with soft start/stop and variable speed control. Variable R.P.M.
3-12. The Approach Ramp option allows the operator to load and
unload the machine with a pallet truck.
PART NO.
COL-5-46-14
OPTIONAL
APPROACH RAMP
PART NO.
SWA-50
SWA-50-R-4848
TURNTABLE
MAXIMUM LOAD NET WT.
CAPACITY
HEIGHT
DIAMETER
(POUND)
2-1/16"
4,000 lb.
78"
597
PALLET TRUCK ACCESS RAMP
221
LIST PRICE
EACH
$4,527.00
$540.00
Plastic Pallets and Skids
Made of virgin polyethylene. Features four way entry.
Serrated deck with holes for drainage. Plastic pallets
are ideal for export, pharmaceutical, medical and food
applications. No steel inserts - not for use in unsupported
pallet rack. Uniform supported capacity is 4,000 lbs. Fork
openings are 9-3/4"W x 4"H. Other styles available.
PART NO.
PLP2-4840-BLUE
PLP2-4840-YELLOW
PLP2-4840-ORANGE
PLP2-4840-BLACK
PLP2-4840-RED
OVERALL SIZE
(W x L x H)
473/8" x 39½" x 6"
473/8" x 39½" x 6"
473/8" x 39½" x 6"
473/8" x 39½" x 6"
473/8" x 39½" x 6"
COLOR
BLUE
YELLOW
ORANGE
BLACK
RED
NET WT.
(POUND)
38
38
38
38
38
LIST PRICE
EACH
$102.00
102.00
102.00
102.00
102.00
Deluxe Roller Stands
Designed for use as an extra hand when
working with long materials. Each stand includes
chrome plated rollers and heavy-duty cast-steel
base. Choose either V-style roller design or
single horizontal roller design. The height of
each stand is adjusted with a friction lock screw.
Great for use in machine and wood shops.
Capacity 1,760 lbs. Roller diameter is 2".
PART NO.
STAND-H
STAND-V
STAND-H-HP
STAND-V-HP
DESCRIPTION
14" HORIZONTAL ROLLER
(2) 5" "V" ROLLERS (9"W ACROSS)
14" HORIZONTAL ROLLER
(2) 5" "V" ROLLERS (9"W ACROSS)
LIST PRICE
EACH
$94.00
99.00
$100.00
100.00
NET WT.
(POUND)
248
LIST PRICE
EACH
$1,047.00
Adjustable Step-Mate Stands
Our Step-Mate Stands can be used as either
a comfortable worker platform or a semipermanent step. Individual step size is 12"
deep. Top step is fixed 7" higher than bottom
step. Serrated steel surface ensures safe
footing. Legs adjust individually by screwing
them into or out of the leg base. Powder
coated finish. Welded steel construction.
OVERALL
PART NO. SIZE (W x D)
ASP-24 233/8" x 227/8"
ASP-36 36¼" x 227/8"
LOWER
STEP
6" TO 8¼"
6" TO 8¼"
UPPER
NET WT. LIST PRICE
CAPACITY
STEP
(POUND)
EACH
13" TO 15¼" 500 lb.
25
$234.00
13" TO 15¼" 500 lb.
33
252.00
Adjustable Work-Mate Stands
Minimizes fatigue by elevating workers to heights
that are comfortable and ergonomically correct.
Ergonomic matting deck style provides comfort for
the operator who stands all day. The height of each
leg can be adjusted individually to ensure proper
working height. Powder coated safety yellow finish.
Welded steel construction.
PART NO.
AHT-L-2436
AHT-L-2448
AHT-H-2436
AHT-H-2448
SERVICE
NET WT.
RANGE
(POUND)
23" to 38½"
66
23" to 38½"
66
27" to 42"
75
27" to 42"
75
NUMBER
OF STEPS
5
DECK SIZE
(W x L)
24" x 36"
24" x 48"
24" x 36"
24" x 48"
SERVICE
RANGE
6¼" to 8"
6¼" to 8"
10" to 16"
10" to 16"
CAPACITY
500 lb.
500 lb.
500 lb.
500 lb.
NET WT.
(POUND)
44
52
60
66
LIST PRICE
EACH
$281.00
328.00
$294.00
336.00
Commercial Spring Loaded Ladders
The all directional spring-loaded swivel casters feature
steel dome protection and include rubber pad bottoms to
minimize movement. Each step is covered with serrated
rubber so users will not slip. Powder coat finish. Capacity
is 300 lbs. Units feature three steps with a top step height
of 28-1/2". Additional sizes available from 1 to 5 steps.
PART NO.
LAD-3-Y
LAD-3-B
LAD-3-W
OVERALL
(W x D x H)
207/8" x 277/8" x 601/16"
207/8" x 277/8" x 601/16"
207/8" x 277/8" x 601/16"
COLOR
YELLOW
BLUE
WHITE
NET WT.
(POUND)
39
39
39
LIST PRICE
EACH
$222.00
222.00
222.00
Prices good through June 2015 or while supplies last! Not all items stocked at every location.
Call us or stop in for additional information regarding our services and options.
Grand Rapids
(626) 532-2375
1-888-532-2375
www.puritygas.com
Bulletin: OVERVIEW-0914
Angola
(260) 665-7241
Battle Creek
(269) 660-1907
Cadillac
(231) 779-2468
Elkhart
(574) 389-8760
Fort Wayne
(260) 497-7565
Kalamazoo
(269) 344-0518
Lansing
(517) 321-9555
Mt. Pleasant
(989) 775-0898
Saginaw
(989) 755-4344
Traverse City
(231) 922-0851
Warsaw
(574) 267-6066
Family Owned and Locally
Operated Since 1938