BWT PERMAQ® Compact 950 Product data sheet 09/2014 Combined softening and reverse osmosis system Softening and reverse osmosis system integrated in one cabinet Benefits: Reliable and maintenance-friendly This system is the perfect solution for autoclaves, steam generators, dairies, hospitals, car washes, where a low conductivity (< 20 µS/cm) is required and where space is limited. Features: Simple reverse osmosis system, incl. softening The system’s size makes it easy to position when space is limited Built-in control - no additional electronics required Direct reading of permeate flow during operation Manometer for reading the pressure The system will automatically stop if there is no supply pressure Alarm output Water quality with a conductivity of < 20 µS/cm All combined into one cabinet High performance due to the built-in softening of raw water Can have a conductivity meter fitted The combination with a mixed-bed system can provide an even lower conductivity (< 0.5 µS/cm) Installation kit for quick and easy connection Equipped with wheels - easy to position when space is limited Integrated reservoir and transport pump Option with the possibility of frequency-controlled pump The flexible design allows for expansion with: Conductivity meter with alarm function – giving the system the best possible protection Integrated mixing valve for adjusting the conductivity - the possibility to supply water quality according to special needs Mix-bed system as a further treatment - providing even lower conductivity (< 0.5 μS/cm) Installation kit - quick and simple connection Benefits: Robust design - less maintenance Withstands multiple starts and stops – longer service life of the pump Larger flow (4 m 3 at 3 bar) Larger hydrophore - gross 11 litres (only with CM pump) Frequency-control - allows for adjustment of the water pressure (CME pump only) Pressure transmitter with log function (only with the CME pump) BWT HOH A/S Geminivej 24 • DK-2670 Greve Tel.: +45 43 600 500 [email protected] • www.bwt.dk Der tages forbehold for trykfejl og tekniske ændringer. BWT PERMAQ® Compact 950 Product data sheet 09/2014 Combined softening and reverse osmosis system Technical data: ® Unit 951-S 952-S 953-S Nominal permeate performance * l/h 400 600 800 Salt reduction % > 98.0 Water utilisation WCF (min/max) ** % 75 l 500 BWT PERMAQ Compact 950 Permeate tank volume Inlet pressure (min/max) bar 2.0 / 7.0 V / Hz 3x400 / 50 A 16 Power consumption kW 3.1 Protection class IP 54 Raw water temperature °C 5 – 25 Ambient temperature Electrical connection Fuse °C 5 – 35 Inlet ” ¾ Outlet ” ¾ Drain ” ¾ Width mm 1500 Depth mm 660 Height mm 1350 Iron and manganese (Fe+Mn) mg/l < 0.1 Weight dry, approx. kg 203 215 Product number 421068520 421068530 * For water quality of: 10°C, 3 bar, TDS ≤ 500 mg/l ± 15%, SDI ≤ 3.0, oxidants ≤ 0.05 mg/l. ** Based on a water quality of TDS ≤ 500 mg/l, without softening as a pre-treatment. BWT HOH A/S Geminivej 24 • DK-2670 Greve Tel.: +45 43 600 500 [email protected] • www.bwt.dk Der tages forbehold for trykfejl og tekniske ændringer. 226 421068540
© Copyright 2024