PENDANT MOUNT INSIDE & OUTSIDE LIT CORNER PATTERNS Project: Type:
PENDANT MOUNT INSIDE & OUTSIDE LIT CORNER PATTERNS 1.800.263.AXIS [ T ] 514.948.6272 [ F ] 514.948.6271 www.axislighting.com PROJECT INFORMATION Project: Type: IMPORTANT – all corner patterns must be submitted with drawings indicating dimensions and angles degree. 90 900 900 0 900 900 8' 8' 8' 8' 8' 900 8' 8' 900 900 8' BMDPAT SQO 90+90+90+90 S 32' BMDPAT SQI 90+90+90+90 S 32' 1 2 3 4 5 1 2 3 4 5 3D VIEW - Square Outside Lit Corner Pattern 3D VIEW - Square Intside Lit Corner Pattern NOTE: Pattern length is determined by lamp length ORDERING CODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PRODUCT SPECIFICATIONS 1 PRODUCT ID BDPAT BMDPAT BBDPAT B6DPAT 2 PATTERNS SQI SQO RECI RECO beam2 pendant direct beam3 pendant direct beam4 pendant direct beam6 pendant direct 3 CORNER DEGREES square inside lit corners square outside lit corners rectangle inside lit corners rectangle outside lit corners 90 90 degrees # other degree 4 OPTICS DIRECT 5 LENGTH/FT S satin lens F frosted lens(1) # total pattern length 6 SPECIFY LENGTH NL NL4 EX EX4 nominal (3’ & 4’ lamps) nominal (4’ lamps only) exact (3’ & 4’ lamps) exact (4’ lamps only) (1) not recommended with staggered lamping 7 LAMP T5 T5 T5HO T5HO T8 T8 8 LAMP CONFIG. 0 1 2 +S 9 FINISH AP aluminum paint W white C custom 0 lamp 1 lamp 2 lamps(2) staggered(3) (2) not available for beam2 and beam3 (3) only T5/T5HO 1 lamp staggered for beam2 and beam3 13 MOUNTING/SUSPENSION CA# CT9-# CT15-# CTS# SA# drywall+cable length (36”std) TB/TG 9/16+cable length (36” std.) TB/TG 15/16+cable length (36”std) ST+cable length (36”std) drywall+stem length>48 (18”std) (5) Please consult factory 14 BATTERY B# battery pack 4’ sections 10 VOLTAGE 120 277 347 UNV 120V 277V 347V(5) universal 11 BALLAST D E ERS T BI dimming instant start rapid start step dimming(6) bi-level dimming 12 CIRCUITS 1 2 2A/B +E# +NL# +GTD# 1 regular 2 regular 2 alternating emergency section night light section generator transfer device (6) In T5HO, only available for 2x4’ lamp configuration 15 OTHER F fuse 16 CUSTOM C custom Please specify Ballast, Battery Pack and Integrated Control Details and Custom Description: FILE NAME:Beam Pendant OU-IN-LC October 30, 2014 Product design and development is an ongoing process at Axis Lighting. We reserve the right to change specifications. Contact Axis for the latest product information. © 2011 Axis Lighting Inc. Page: 1 / 3 PENDANT MOUNT INSIDE & OUTSIDE LIT CORNER PATTERNS 1.800.263.AXIS [ T ] 514.948.6272 [ F ] 514.948.6271 www.axislighting.com LIT CORNER FEATURES The Lit Corner system allows continuous illumination all the way through the corner section To optimize corner illumination, lit corners are created as integral components of the linear sections. Linear sections have mitered ends that connect to corresponding mitered ends of neighboring linear sections. Inside Illuminated Corner. A fully lit corner on the inside planes. Outside Illuminated Corner - A fully lit corner on the outside planes. Illuminated Corners are more complex. Because the corner is fully illuminated, the corner is not independent of the straight sections, but integrated into the straight segment’s housing. The corner is mitered, allowing a seamless line of light. TIP: Provide sketches illustrating corner types and locations required. Outside lit Corner FILE NAME:Beam Pendant OU-IN-LC Inside lit Corner October 30, 2014 Product design and development is an ongoing process at Axis Lighting. We reserve the right to change specifications. Contact Axis for the latest product information. © 2011 Axis Lighting Inc. Page: 2 / 3 IMPORTANT – all corner patterns must be submitted with drawings indicating dimensions and angles degree. 1.800.263.AXIS - www.axislighting.com - [email protected]
© Copyright 2024