PENDANT MOUNT REGULAR LIT CORNER PATTERNS
1.800.263.AXIS
[ T ] 514.948.6272
[ F ] 514.948.6271
www.axislighting.com
PROJECT INFORMATION
Project:
Type:
IMPORTANT – all corner patterns must be submitted with drawings indicating dimensions and angles degree.
11'
8'
900
1200
900
600
900
900
7'
8'
900
9'
1300
900
11'
9'
11'
500
6'
BMDPAT
REC
90+90+90+90
38'
BDPAT
1
2
3
5
1
TOP VIEW - Rectangle Corner Patterns
ASO 120+60+50+130 30'
2
3
BBDPAT
5
OPR 90+90 31'
1
TOP VIEW - Corner Patterns
2
3
5
TOP VIEW - Open Shape Corner Pattern
NOTE: Pattern length is determined by lamp length
ORDERING CODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PRODUCT SPECIFICATIONS
1 PRODUCT ID
BDPAT
BIPAT
TBPAT
TBDPAT
TBIPAT
BMDPAT
BMIPAT
BBPAT
BBDPAT
BBIPAT
B6PAT
B6DPAT
B6IPAT
2 PATTERNS
3 CORNER DEGREES
beam2 pendant direct
SQ square regular lit corners
90 90 degrees
beam2 pendant indirect
REC rectangle regular lit corners
# other degree
twinbeam pendant direct/indirect ASO other shape regular lit corners
twinbeam pendant direct
OPR open shape regular lit corners
twinbeam pendant indirect
beam3 pendant direct
beam3 pendant indirect
beam4 pendant direct/indirect
beam4 pendant direct
beam4 pendant indirect
beam6 pendant direct/indirect
beam6 pendant direct
beam6 pendant indirect
4 OPTICS DIRECT
5 LENGTH/FT
S satin lens
F frosted lens(1)
# total pattern length
6 SPECIFY LENGTH
NL
NL4
EX
EX4
nominal (3’ & 4’ lamps)
nominal (4’ lamps only)
exact (3’ & 4’ lamps)
exact (4’ lamps only)
(1) not recommended with
staggered lamping
7 LAMP
T5 T5
T5HO T5HO
T8 T8
8 DOWN LAMP
0
1
2
+S
9 UP LAMP
0
1
2
+S
0 lamp
1 lamp
2 lamps(2)
staggered(3)
(2) not available for beam2 and beam3
(3) only T5/T5HO 1 lamp staggered for beam2
and beam3
13 CIRCUITS
1
2
2A/B
+E#
+NL#
+GTD#
0 lamp
1 lamp
2 lamps(2)
staggered(3)
(2) not available for beam2 and beam3
(3) only T5/T5HO 1 lamp staggered for beam2
and beam3
14 MOUNTING/SUSPENSION
1 regular
2 regular
2 alternating
emergency section
night light section
generator transfer device
CA#
CT9-#
CT15-#
CTS#
SA
10 FINISH
AP aluminum paint
W white
C custom
drywall+cable length (36”std)
TB/TG 9/16+cable length (36” std.)
TB/TG15/16+cable length (36” std.)
ST+cable length (36” std.)
drywall+stem length>48 (18”std)
11 VOLTAGE
120
277
347
UNV
120V
277V
347V(5)
universal
(5) Please consult factory
15 BATTERY
B# battery pack 4’ sections
16 OTHER
F fuse
D dust cover
12 BALLAST
D
E
ERS
T
BI
dimming
instant start
rapid start
step dimming(6)
bi-level dimming
(6) In T5HO, only available for 2x4’ lamp configuration
17 CUSTOM
C custom
Please specify
FILE NAME:Beam Pendant LC
October 30, 2014
Product design and development is an ongoing process at Axis Lighting. We reserve the right to change specifications. Contact Axis for the latest product information.
© 2011 Axis Lighting Inc. Page: 1 / 3
PENDANT MOUNT - REGULAR LIT CORNERS
1.800.263.AXIS
[ T ] 514.948.6272
[ F ] 514.948.6271
www.axislighting.com
LIT CORNER FEATURES
The Lit Corner system allows continuous illumination all the way
through the corner section
To optimize corner illumination, lit corners are created as integral
components of the linear sections. Linear sections have mitered
ends that connect to corresponding mitered ends of neighboring
linear sections.
Regular Illuminated Corner - A fully illuminated corner that lies on
the same plane, for example, the ceiling. There are two corner options
available for Regular Lit Corners: Open Shape Corner and Closed
Shape Corner
Illuminated Corners are more complex. Because the corner is
fully illuminated, the corner is not independent of the straight
sections, but integrated into the straight segment’s housing. The
corner is mitered, allowing a seamless line of light.
TIP: Provide sketches illustrating corner
types and locations required.
Closed Shape Corner
Open Shape Corner
FILE NAME:Beam Pendant LC
October 30, 2014
Product design and development is an ongoing process at Axis Lighting. We reserve the right to change specifications. Contact Axis for the latest product information.
© 2011 Axis Lighting Inc. Page: 2 / 3
IMPORTANT – all corner patterns must be submitted with drawings indicating dimensions and angles degree.
1.800.263.AXIS - www.axislighting.com - [email protected]