1. No category

3rd International Through-life Engineering Services Conference
4th & 5th November 2014
Vincent Building
Cranfield University, UK
Detailed Programme
Day 1 – Tuesday 04th September 2014
Keynote Speakers:
9:50
Keynote 1: Professor Rainer Stark, Fraunhofer IPK, Berlin
“Advanced technologies in life cycle engineering”
10:30
Keynote 2: Dr Maureen McCue, Head of Research and Technology
BAE SYSTEMS Military Air and Information
“Technology – What do we want, when do we want it, why now?”
Conference Sessions and Papers:
Session 1-1-1
The Challenge of No-Fault-Found in Through-Life Engineering Service Provision
Chair: C. Hockley
11:40 Paper 1-1-1-A
“The contribution of maintenance human factors to no fault founds on aircraft systems engineering”
N. Pickthall
12:00 Paper 1-1-1-B
“The performance of observer-based residuals for detecting intermittent faults: The limitations”
T. Sedighi, P.D. Foote, S. Khan
12:20 Paper 1-1-1-C
“Study on intermittent faults and electrical continuity”
W.S. Ahmad, S. Perinpanayagam, I. Jennions, S. Khan
12:40 Paper 1-1-1-D (Invited Paper)
“Potentials of applying methods, tools, processes and knowledge from testing in product development to the NFF
problem”
C. Hans, K. Hribernik
Session 2-1-1
Reliability, Prognostics and Self-Healing
Chair: A. Tiwari
11:40 Paper 2-1-1-A
“Fault tolerant quadded logic cell structure with built-in adaptive time redundancy”
P. Schiefer, R. McWilliam, A. Purvis
12:00 Paper 2-1-1-B
“The design of reliable circuits using logic redundancy”
T.C. Cavalcante, R. McWilliam, A. Purvis
12:20 Paper 2-1-1-C
“Self-healing fuel pump controller mapped into memory based finite state machine”
P. Schiefer, R. McWilliam, A. Purvis
12:40 Paper 2-1-1-D
“Modelling, simulation and optimisation of a piezoelectric energy harvester”
M. Farnsworth, A. Tiwari, R. Dorey
Session 3-1-1
11:40 Industrial workshop: Obsolescence Management
Chair: J. Erkoyuncu
Keynote Speakers:
14:00
Keynote 3: Professor Benoît Iung, CRAN, University of Lorraine
“Advanced maintenance services for promoting sustainability”
14:40
Keynote 4: Professor I S Jawahir, Institute for Sustainable Manufacturing, University of Kentucky
“The impact of novel material processing methods on component quality, life and performance”
Conference Sessions and Papers:
Session 1-1-2
Standards for Through-life Engineering Services
Chair: S. Kelly
15:30 Paper 1-1-2-A
“Establishing key performance drivers for through-life engineering services”
A. Shaw, P. Tasker, F. Frodl, M.L. Corcella, R. González Muñoz, S. Deshpande, Q. Wei
15:50 Paper 1-1-2-B
“Through-life engineering services – Innovation and the role of standards”
P. Tasker, A. Shaw, S. Kelly
Session 2-1-2
Cost Engineering for Through-Life Engineering Services
Chair: E. Shehab
15:30 Paper 2-1-2-A
“Cost drivers of integrated maintenance in high-value systems”
P. Amorim-Melo, E. Shehab, L. Kirkwood, P. Baguley
15:50 Paper 2-1-2-B
“Challenges in cost analysis of innovative maintenance of distributed high-value assets”
L. Kirkwood, E. Shehab, P. Baguley, P. Amorim-Melo, I. Durazo-Cardenas
Session 3-1-2
Obsolescence Management
Chair: J. Erkoyuncu
15:30 Paper 3-1-2-A
“Mitigating the risk of software obsolescence in the oil and gas sector”
J.A. Erkoyuncu, S. Ononiwu, R. Roy
15:50 Paper 3-1-2-B
“Software obsolescence in defence”
S. Rajagopal, J.A. Erkoyuncu, R. Roy
Session 1-1-3
Product Development for Through-Life Engineering Services
Chair: M. Karlberg
16:40 Paper 1-1-3-A
“Functional product business models: A review of the literature and identification of operational tactical
practices”
W. Reim, D. Rönnberg Sjödin, V. Parida, A. Persson
17:00 Paper 1-1-3-B
“Functional products lifecycle: Governed by sustainable win-win situations”
J. Lindström, A. Dagman, M. Karlberg
17:20 Paper 1-1-3-C
“Challenges and opportunities within simulation-driven functional product development and operation”
J. Pavasson, A.-L. Ljung, M. Karlberg, I.A.S. Larsson, S. Johansson, T.S. Lundström
17:40 Paper 1-1-3-D
“A decision support tool for optimising support site configuration of functional products”
P. Kyösti, S. Reed, S. Sjödin
18:00 Paper 1-1-3-E
“Context driven remaining useful life estimation”
C.-A. Johansson, V. Simon, D. Galar
Session 2-1-3
Condition Monitoring and Health Management –1
Chair: S. Perinpanayagam
16:40 Paper 2-1-3-A (Invited Paper)
“Can equipment failure modes support the use of a condition based maintenance strategy?”
D. Baglee, E. Jantunen
17:00 Paper 2-1-3-B
“Machine monitoring system based on MTConnect technology”
B. Edrington, B. Zhao, A. Hansel, M. Mori, M. Fujishima
17:20 Paper 2-1-3-C
“Development of generic methodology for designing a structural health monitoring installation based on the
acoustic emission technique”
D. Gagar, M. Martinez, P. Foote
17:40 Paper 2-1-3-D
“Electromagnetic monitoring of semiconductor ageing”
A.P. Duffy, J.F. Dawson, I.D. Flintoft, A.C. Marvin
Session 3-1-3
16:40 Industrial workshop: No Fault Found
Chair: C. Hockley
Conference Dinner at the Sculpture Gallery, Woburn Abbey
Day 2 – Wednesday 5th November 2014
Keynote Speakers:
09:00
Dr Youichi Nonaka, Chief Researcher, Hitachi
Fast path finding system with GPGPU computing for replacement tasks in plant maintenance
09:40
Dr Vijay Srinivasan, Chief of Systems Integration, National Institute of Standards and Technology,
USA
“On architecting and composing Through-Life engineering information services to enable
smart manufacturing”
Conference Sessions and Papers:
Session 1-2-1
Asset Life cycle Management
Chair: A. Starr
10:50 Paper 1-2-1-A
“A multidisciplinary, expert-based approach for the identification of lifetime impacts in asset life cycle
management”
R.J. Ruitenburg, A.J.J. Braaksma, L.A.M. van Dongen
11:10 Paper 1-2-1-B
“Precise vehicle location as a fundamental parameter for intelligent self-aware rail-track maintenance
systems”
I. Durazo-Cardenas, A. Starr, A. Tsourdos, M.Bevilacqua, J. Morineau
11:30 Paper 1-2-1-C
“Through-life engineering services: A wind turbine perspective”
J. Igba, K. Alemzadeh, C. Durugbo, K. Henningsen
11:50 Paper 1-2-1-D
“Semantic web service wrappers as a foundation for interoperability in closed-loop product lifecycle
management”
M. Franke, K. Klein, K. Hribernik, D. Lappe, M. Veigt, K.-D. Thoben
12:10 Paper 1-2-1-E
“Naval engineering: Data indicative of the material state”
G. Ford, C. McMahon, C. Rowley
Session 2-2-1
Recent Progresses in Jet-Engine Regeneration
Chair: B. Ernst
10:50 Paper 2-2-1-A
“Approaches for improving cutting processes and machine tools in re-contouring”
B. Denkena, V. Boess, D. Nespor, F. Rust, F. Floeter
11:10 Paper 2-2-1-B
“Multiscale optical inspection systems for the regeneration of complex capital goods”
J. Schlobohm, Y. Li, A. Pösch, B. Langmann, M. Kästner, E. Reithmeier
11:30 Paper 2-2-1-C
“Numerical investigation of circumferential coupled deterioration effects of a jet engine compressor front
stage compared to blisk geometry”
A. Kellersmann, G. Reitz, J. Friedrichs
11:50 Paper 2-2-1-D
“Recent progress in turbine blade and compressor blisk regeneration”
J. Aschenbruck, R. Adamczuk, J.R. Seume
12:10 Paper 2-2-1-E
“Crack repair of single crystal turbine blades using laser cladding technology”
B. Rottwinkel, C. Nölke, S. Kaierle, V. Wesling
Session 3-2-1
10:50 Industrial Workshop: Non-destructive testing in Maintenance
Chair: P. Addepalli
Session 4-2-1
10:50 Industrial workshop: Standards for Through-Life Engineering Services
Chair: P. Tasker, A. Shaw, and S. Kelly
Session 1-2-2
Condition Monitoring and Health Management –2
Chair: K. Tracht
13:30 Paper 1-2-2-A
“Integration of expert judgment into remaining useful lifetime prediction of components”
P. Schuh, H. Stern, K. Tracht
13:50 Paper 1-2-2-B
“State-based prognostics with state duration information of cracks in structure”
O.F. Eker, Z. Skaf, F. Camci, I.K. Jennions
14:10 Paper 1-2-2-C
“The application of Bayesian change point detection in UAV fuel systems”
O. Niculita, Z. Skaf, I.K. Jennions
Session 2-2-2
Functional and High Temperature Surface Engineering for Through-Life Engineering Services
Chair: J. Endrino
13:30 Paper 2-2-2-A (Invited Paper)
“The role of innovative nanomechanical test techniques in designing more durable, adaptive and
multifunctional coatings”
B.D. Beake
13:50 Paper 2-2-2-B
“Comprehensive environmental testing of optical properties in thin films”
I. Heras, E. Guillén, M. Krause, R. Wenisch, R. Escobar-Galindo
14:10 Paper 2-2-2-C
“Wear coatings for high load applications”
J. Rao, T. Rose, M. Craig, J.R. Nicholls
Session 3-2-2
Systems Design for Through-Life Engineering Services
Chair: F. Kimura
13:30 Paper 3-2-2-A
“A conceptual model for evaluating product-service systems leanness in UK manufacturing companies”
M. Elnadi, E. Shehab
13:50 Paper 3-2-2-B
“Improvement of system design process: Towards whole life cost reduction”
P. Sydor, E. Shehab, T. Mackley, P. John, A. Harrison
14:10 Paper 3-2-2-C
“An aerospace requirements setting model to improve system design”
X. Tomas Centrich, E. Shehab, P. Sydor, T. Mackley, P. John, A. Harrison
N.B The paper numbers refer to room-slot-day-position in session
The conference organising committee reserve the right to change this programme