REDROCK MEMS-BASED REED SENSOR ™

REDROCK™ MEMS-BASED REED SENSOR
Top View
RedRock™ MEMS-Based Reed Sensor
Ideally suited to the needs of Medical, Industrial, Instrumentation, Automotive, and
other applications where small size, zero power operation, and directional magnetic
0.84(0.033)
sensitivity are required, the RedRock ™ MEMS-Based Reed Sensor is a single-pole,
single throw (SPST) device with normally open ruthenium contacts. The sensor may
1.35(0.053)
be actuated by an electromagnet, a permanent
magnet, or a combination of both.
RedRock™ MEMS-Based Reed Sensor
u 1.13mm 2 Footprint – World’s Smallest Reed Sensor
Side View
u Highly Directional Magnetic Sensitivity
APPLICATIONS
u Hot Switchable
1.11(0.044)
u Medical
u 50 G Shock Resistance
Devices
u Battery Powered Devices
u Wide Operating Temperature Range
u Prosthetics
u Hermetically Sealed
u Robotics
u Ideal for SMD Pick and Place
u Animal Tracking
u Tape and Reel Packaging
u High Resolution Position &
u RoHS Compliant
Bottom View
0.300 0.435
Level Sensing
(0.012) (0.017)
DIMENSIONS0.686(0.027)
0.418(0.016)
in Millimeters (Inches)
0.735(0.029)
Top View
Pad Dimensions in millimeters as viewed
from bottom of die (pad side)
1.285(0.051)
0.84(0.033)
0.55(0.022)
1.35(0.053)
0.80(0.031)
0.185
(0.007)
Side View
0.744(0.029)
1.11(0.044)
Ordering Information
Part Number RR100-X W TR
Product Packaging
Model Number
TR=Tape/Reel
RR100
Bottom View
0.300 0.435
(0.012) (0.017)
Typical Magnetic Sensitivity
J=20mT
K=12mT
0.686(0.027)
0.418(0.016)
Package Style
W=Wafer Level
Operating Temperature Range is -40ºC to +85ºC
Ordering Information (Evaluation Kit)
0.735(0.029)
Part Number: RR100-EK1
1.285(0.051)
0.55(0.022)
All specifications are typical unless otherwise specified and subject to change without notice.
For more information please refer to Coto Technology’s Product Warranty, Trademarks & Disclaimers.
0.80(0.031)
0.185
(0.007)
rev. 11062014
COTO TECHNOLOGY | tel: (401) 943.2686 | cotorelay.com
REDROCK™
RR100
Parameters
OPERATING CHARACTERISTICS
Units
Min
Typ
Max
Operate Sensitivity1 - K
J
mT
12
20
Operate Time (including bounce)
μs
500
Release Time
μs
500
Switched Voltage
VDC
6
Switched Current
mA DC
1
ELECTRICAL CHARACTERISTICS
Breakdown Voltage
VDC
50
Contact Resistance (Initial)
W
10
Contact Capacitance
pF
0.2
Insulation Resistance (Min.)
W
1012
Operations
107
ºC
-55 to +150
ºC
-40 to +85
LIFE EXPECTANCY
1.2VDC, 1mA switching load2
ENVIRONMENTAL RATINGS
Storage Temperature
Operating Temperature
Vibration Resistance - Functional
G
100
Shock Resistance - Functional4
G
750
gm
400
3
Shear Force
5
Notes:
Individual switches may vary in magnetic closure sensitivity by ± 4 mT (Model K) or ± 7 mT (Model J) from the typical value.
If your application requires a different sensitivity range, please contact Coto at [email protected].
2
Life expectancy defined as mean cycles before failure with end of life defined as contact resistance >1000 W.
3
Functional Vibration Resistance is defined as the mechanical-only force (in G, 110 Hz - 3 kHz), that a switch can withstand without causing a
contact closure.
4
Functional Shock Resistance is defined as the mechanical-only force (in G), that a switch can withstand without causing a contact closure.
5
Shear Force is the mechanical force (applied to the top half, in a plane parallel to the PCB) that a switch can withstand without causing damage
to the switch.
1
For all inquiries,
please contact [email protected]
rev. 11062014
COTO TECHNOLOGY | tel: (401) 943.2686 | cotorelay.com