4-Cycle Engines
E0502
HONDA Overhead Valve Engines From 4 to 22 HP. Overhead valve design delivers exceptional performance while keeping size and weight to a minimum.
Built with a full range of features to keep them running for a long time. Honda’s superior four-stroke technology includes: • Cast Iron cylinders • Ball
bearing supported forged crankshaft • Chrome top piston ring • Mechanical governor • Fixed jet float type carburetor • Replaceable valve guides and automatic
decompression for easy starting • “Oil Alert” system which shuts down the engine if oil supply reaches an unsafe level • Transistorized ignition systems on all
except 11 & 13 HP models which have CDI systems with Electronic Advance. Note: Honda has revised the advertised horse power ratings to comply
with the more conservative SAEJ1349 standards.
For optimum performance and safety, we recommend you read the
Owner's Manual before operating your Honda Power Equipment.
OIL ALERT™ SYSTEM
Honda’s Oil Alert™ System offers added protection for your Honda engine. It shuts off the engine automatically before the oil level in the crankcase falls
below the safe limit. Honda’s Oil Alert is a simple, reliable means of preventing engine problems and assuring your engine of more time on the job.
Horizontal
Shaft Engines
7.9 to 22.1 HP
Overhead Valve Engines
3.5 • 4.8 • 5.5 H.P.
Rewind Starters
HORIZONTAL-SHAFT
D
GX340
TX Series - Ideal for use as a Replacement Pump Engine
GX240 7.9-HP & GX270 8.4-HP Series
Overhead valve style. Mid-size all purpose engine. All
standard Honda features plus a transistorized ignition system, dual oil fillers,
bottom intake air-cleaner and exclusive oil alert feature. Fuel tanks are 6.4 Qt.
GX240K1QA Standard Model: With Rewind Starter.
GX240K1QAE Electric Start Model: With 12-Volt starting system.
GX240K1HA Gear Reduction Engine: Features a fully enclosed 6 to 1
internal reduction gear. PTO is 3-15/64 x 1".
GX270QAE2 Standard Model: With 12 Volt starting system.
GX270PA2 Standard Model: Pump engine, 1” threaded shaft.
D
GX340 10.7-HP Series
GX120
OHV Style. All Honda standard features plus transistorized ignition system, dual oil
fillers, rewind starters, bottom intake air cleaner and oil alert feature.
3.5-HP GX120 Series
GX120K1QX: Has a 3/4" O.D. Keyed shaft, drilled & tapped 5/16"-24.
GX390 11.7-HP SERIES
4.8-HP GX160 Series
The largest of Honda’s single cylinder industrial engines. All standard
Honda features plus CDI ignition w/electronic advance, oil alert feature and
automatic decompression release. Fuel tanks are 7.4 Qt.
Crankshaft: 1" diameter tapped 3/8-24 UNF with keyway.
GX390K1QA Standard Model: With rewind starter.
GX390K1QAE Electric Start Model: With a 12-Volt starter.
GX160K1QX: Has a 3/4" O.D. Keyed shaft, drilled & tapped 5/16"-24.
GX160K1QXE: Same as GX160K1QX except with electric start.
GX160K1TX: Pump Engine has a 5/8"-18 threaded shaft and mounting
flange for use with close-coupled Centrifugal pumps.
GX160K1HX: Has a 6:1 Gear Reduction with 3/4" O.D. Keyed shaft.
5.5-HP GX200 Series
V-Twin Engines
GX200QX2: Has a 3/4" O.D. Keyed shaft, drilled & tapped 5/16"-24.
GX200UTQXE2: Has a 3/4” O.D. Keyed shaft with an electric start.
GX200HX2: Has a 6:1 Gear Reduction with 3/4" O.D. Keyed shaft.
Part No.
H.P.
AE GX120K1QX
3.5
AE GX160K1QX
4.8
AE GX160K1QXE *4.8
AE GX160K1TX
4.8
AE GX160K1HX
4.8
AE GX200QX2
5.5
AE GX200UTQXE2 *5.5
AE GX200HX2
5.5
*Has Electric Start.
Engine Style
Standard
Standard
Standard
Centrifugal Pump
Gear Reduction
Standard
Standard
Gear Reduction
Crankshaft
3/4" with Keyway 3/4" with Keyway
3/4" with Keyway
Threaded 5/8"-18
3/4" with Keyway
3/4" with Keyway
3/4” with Keyway
3/4" with Keyway
Overhead valve style. Includes all standard Honda features plus dual-element
air cleaner, synchro balancer, CDI ignition with electronic advance and oil
alert feature. Fuel tanks are 7.4 Qt.
Crankshaft: 1" diameter , keyed and tapped 7/16"-20.
GX340K1QA Standard Model: With rewind starter.
GX340K1QAE Electric Start Model: With a 12-Volt starting system.
GX630RQZB2 20.3 HP & GX690RTXA2 22.1 HP
The largest of Honda’s industrial engines. All standard Honda features
plus Full-flow Oil Filter, 12-Volt starter, fuel pump, CDI ignition w/electronic
advance, oil alert shut-down and 20 amp
charging system.
Wt.
Net Ea.
29 lbs. $ 299.00
34 lbs. 315.00
34 lbs. 497.00
33 lbs. 345.00
39 lbs. 475.00
36 lbs. 329.00
36 lbs. 589.00
41 lbs. 509.00
These engines do not include fuel tank or
exhaust system see options below.
Muffler Options: High mount left outlet
(VHLM6), high mount right outlet (VHRM6).
D
Engines Cannot Ship by UPS due to Concerns with Damage in Shipment
GX690 22.3-HP Series
Part No.
H.P.
Crankshaft
Starter
Wt.
Net Ea.
AE GX240K1QA
7.9
1" Diameter
Rewind
49 lbs. $ 544.00
AE GX240K1QAE
7.9
1" Diameter
12-Volt
72 lbs.
712.00
AE GX240K1HA7.9
Gear Reduction
Rewind
75 lbs.
663.00
AE GX270QAE2
8.4
1” Diameter
12-Volt
62 lbs.
731.00
AE GX270PA28.4
1” Threaded
Rewind
56 lbs.
615.00
AE GX340K1QA
10.7
1" Diameter
Rewind
73 lbs.
577.00
AE GX340K1QAE 10.7
1" Diameter
12-Volt
79 lbs.
771.00
AE GX390K1QA
11.7
1" Diameter
Rewind
73 lbs.
607.00
AE GX390K1QAE 11.7
1" Diameter
12-Volt
79 lbs.
779.00
AE GX630RQZB2 20.3
1" Diameter
Electric 101 lbs. 1289.00
AE GX690RTXA2
22.1 1-1/8” Diameter Electric
98 lbs. 1481.00
AE VHLM6
Muffler, Left Side 630/690 Series.....................136.00
AE VHRM6
Muffler, Right (Oil Filter Side)630/690 Series...136.00
SERVICE & REPAIRS
Did you know? We can
service almost every
brand of pump we sell
in our catalog.
Call us at 1-800-228-9666
(Omaha, NE) for a quote!
DULTMEIER SALES • OMAHA, NE
(800) 228-9666
•
www.dultmeier.com
• DAVENPORT, IA
(800) 553-6975
E0502