/AC 45 Dynamon SP

n
o
C
A
m
/
a
5
n
4
y
D SP
Superplasticizer based on modified acrylic
for precast concrete with a low water/cement
ratio and high early compressive strength
DESCRIPTION
Dynamon SP 45/AC is a liquid superplasicizer based on
modified acrylic polymer specially designed for precast
concrete industry, and is part of MAPEI Dynamon SP
system.
WHERE TO USE
Concrete with Dynamon SP 45/AC has a high level of
workability (consistency class plastic or fluid, according
to ASTM), and is consequently easy to apply when
fresh. At the same time it provides excellent mechanical
performances when hardened.
Dynamon SP 45/AC is especially suitable for precast
concrete and wherever there is the need for a very strong
water reduction and mechanical strengths at early age, in
different consistency classes with a curing temperature
higher than +15°C or with steam curing.
Its characteristics make it particularly suitable for
manufacturing self-compacting concrete, by ensuring
high workability and the accelerated development of
mechanical strength.
For self-compacting concrete the use of Dynamon
SP 45/AC is strongly recommended in order to avoid the
risk of segregation and ensures the mixture homogeneity
even with a very high slump flow.
The main applications of Dynamon SP 45/AC for
concrete are:
• manufacturing of pre-stressed reinforced beams with
a high level of workability and a minimum compressive
strength Rckj, to cut the pre-stressed tendons, equal to
35 N/mm2 and with an excellent appearance;
• manufacturing of cladding panels with a high level of
workability, a very refined surface and an excellent
appearance;
• self-compacting concrete for precasting. Dynamon
SP 45/AC is suitable for manufacturing self-compacting
concrete which can be poured without vibration. Its
characteristics of fluidity and resistance to segregation
are also suitable for a fast casting procedure.
TECHNICAL CHARACTERISTICS
Dynamon SP 45/AC consists of a water solution
containing new generation acrylic polymers. The polymers
efficiently disperse the cement grains and enable fast
hydration and strength gain of concrete.
APPLICATION PROCEDURE
Dynamon SP 45/AC develops maximum dispersing action
when added after the other mixture ingredients (cement,
aggregates, mineral addition or filler and at least 80% of
the mixing water).
COMPATIBILITY WITH OTHER PRODUCTS
Dynamon SP 45/AC is compatible with other products
for preparing special concretes, especially with:
• hardening accelerating chloride-free admixtures from
the Mapefast range for reaching very high mechanical
strengths at early ages;
• Mapeplast SF, silica fume based powder admixture
for manufacturing high quality concretes (in terms of
strength, impermeability, durability);
• Expancrete, expansive agent for manufacturing
shrinkage compensated concrete;
• fly ash for the production of self-compacting concrete
or pumpable concrete;
• different types of limestone fillers for manufacturing
self-compacting concrete;
• Mapeform and DMA form-releasing agents for releasing
concrete from formworks;
• Mapecure curing emulsions to protect form-released
concrete from rapid water evaporation.
TECHNICAL DATA (typical values)
Consistency:
liquid
Colour:
amber
Density (ISO 758) (g/cm³):
1.14 ± 0.03 at +20°C
pH:
6.3 ± 1.0
Main action:
increased workability and/or reduction of mixing water
and acceleration of mechanical strengths
Classification according to EN 934-2:
high range water reducing, hardening accelerating,
superplasticizer, tables 3.1, 3.2 and 7
Classification according to ASTM C 494:
type F and type C
Classification according to ASTM C 1017:
type I
Chlorides soluble in water according to EN 480-10 (%):
< 0.1 (absent according to EN 934-2)
Alkali Content (Na₂O equivalent) according to
EN 480-12 (%):
< 3.0
DOSAGE
Dosage by volume:
for traditional systems - from 0.6 l to 1.5 l per
100 kg of cement.
For self-compacting concrete from 1.0 l to 2.0 l
per 100 kg of fine materials (passing at 0.1 mm
sieve).
Different dosages from those suggested must
be previously checked by concrete trials and,
after consulting MAPEI Technical Services
Department.
PACKAGING
Dynamon SP 45/AC is available in bulk, 200 l
drums, 1000 l IBC tanks.
STORAGE
Dynamon SP 45/AC can be stored for
12 months in sealed containers and protect
from frost.
SAFETY INSTRUCTIONS FOR
PREPARATION AND APPLICATION
Dynamon SP 45/AC is irritant for the eyes. It
is recommended to wear protective gloves and
goggles and to take the usual precautions when
handling chemical products. In case of contact
with the eyes or the skin wash immediately with
plenty of water.
For further and complete information about the
safe use of our product please refer to the latest
version of our Material Safety Data Sheet.
PRODUCT FOR PROFESSIONAL USE.
WARNING
Although the technical details and
recommendations contained in this product data
sheet correspond to the best of our knowledge
and experience, all the above information must,
in every case, be taken as merely indicative and
subject to confirmation after long-term practical
application; for this reason, anyone who intends
to use the product must ensure beforehand that
it is suitable for the envisaged application. In
every case, the user alone is fully responsible for
any consequences deriving from the use of the
product.
Any reproduction of texts, photos and illustrations published
here is prohibited and subject to prosecution
(GB) A.G. BETA
PRODUCT IDENTITY
Please refer to the current version of the
Technical Data Sheet, available from our
website www.mapei.com
All relevant references
for the product are available
upon request and from
www.mapei.com
®
BUILDING THE FUTURE
3381-3-2014
onAC
m
na 45/
y
D SP