User Guide ZU12V Universal Wireless 12 Volt Projector Trigger The ZU12V trigger will work ONLY with Elite Brand motorized screens Version 2.0 and above. (Version # can be located on the back of the Elite Screens Remote Control) Understanding the Synchronization Once an Electric Elite Screen is plugged into a power outlet, the circuit board will search for RF signals for 60 seconds. Pressing the ZU12V's Button 1 during this time frame allows the ZU12V to emit a wireless RF signal which can be detected by the Electric Elite Screen. Once the Electric Elite Screen has detected the ZU12V's RF code, it will sync the power signals of the screen and the ZU12V. The ZU12V will send a wireless RF signal to the screen instructing it to drop or rise depending on the power current of the projector. Trigger Operation Diagram Trigger Diagram Connector to projector Trigger power cord Button 1 Trigger light Button 2 blem ? r e g ) g i V r T 1 m U o Z s c e . s el ig r n i e W r e r T o n c V s 2 h t 1 e i l t i w a l Instructions tions r s e r . o t e p v c i o e n j h U s t Pro a Insert Projector power cord (Not included) (Fig. 1) PART 1 PAR 1. Unplug the pow power cable ble from the power outlet on yo your ur Electric Elite Screen Screen. 2. C 2 Connect onnect the projector’s p power cable to the ZU12V and inse insert in the other end of the cable iint into a power outlet (Refer to Fig.1) (Re (Refe e l b a l i a Av 3. Press & hold Button 1 with a pointy object and quickly plug in the power cable of your Electric Elite Screen (you may need another person to plug in the screen’s power cord. Release Button 1 after 3 seconds. 4. Plug the ZU12V trigger into the power cycle of the projector. Projector power cord 5. Press and hold Button 2 while simultaneously turning on the projector 6. After the projector’s lamp has turned on, completely power off the projector 7. Turn the projector back on and the screen should automatically drop Connect the power of your Electric Elite Screen. Turn on the projector's power and the screen will drop automatically. If the screen does not automatically drop or retract, repeat the process from step one. Still not working? Contact Elite Screens Service Div. at [email protected] (USA, please contact 877-511-1211 @ Service Div.) NOTE: Operation range for ZU12V is around 80 feet (25 m). ZU12V is only compatible with Elite’s electric screens V2.0 and above. v15.6 06/15 www.elitescreens.com [email protected]
© Copyright 2024