04/06 2 Pages Vulkem 350-SL/345/346 APPLICATION See the Vulkem Deck Coating application guide for full details. TYPICAL PERFORMANCE CHARACTERISTICS Key Benefits Summary Easy Installation Available in assortment of colours Waterproofing system PROPERTIES TEST METHOD TYPICAL VALUE Weight Loss 40% Loss Max. Less than 185 60% Solids Min. Greater than 82% Low temperature Ten cycles, -26 C Pass - no cracks Flexibility and Crack Bridging Must bridge a 1.6mm crack Adhesion- in Peel Concrete Min. 5 pli20pli Dry, unprimed) Plywood Min. 3 pli 10pli Trafficable UV Stable PRODUCT INFORMATION DESCRIPTION Modified polyurethane Traffic Deck Coating System composed of a basecoat (350-SL), heavy duty wear coat (345) and a finish coat (346). Chemical Resistance (Tensile Retention) Ease of installation giving substantial labour savings. Basecoat can be sprayed, rolled, squeegeed or trowel applied. Topcoat available in different colours to meet your aesthetic needs. Heavy Duty wear coat can be applied at double thickness in critical traffic areas for extra protection. UL 790 tested with a Class A Fire Rating Extreme impact and abrasion resistance. USAGE/PURPOSE Designed as a waterproof, wear resistant, non-skid deck coating o Greater Than Water 70% 98% Ethylene Glycol (Anti-freeze) 70% 97% Mineral Spirits 45% 85% Motor Oil Not included 92% Hydraulic Brake fluid as part of 84% Deicing Materials ASTM C-957 99% 7% Detergent solution none 100% Weathering Not less than Resistance and 90% recovery from Recovery from Elongation 35% Elongation 80% Tensile Retention 95% 90% Elongation Retention 100% Abrasion 50mg. Weight Loss 15mg Resistance Max. Tear Resistance N/A 95pli Fire Rating N/A UL Rating Class A system for; Parking decks Roof decks Stadium bleachers Balconies and other areas requiring a durable coating system. PACK/COLOUR PRODUCT CODE 18.9L Pails. Vulkem 345 GREY 215400 Vulkem 346 SLATE GREY 215422 GREY 215410 Vulkem 350-SL/345/346 IMPACT AND ABRASION RESISTANT TRAFFIC DECK COATING SYSTEM Vulkem 350SL GREY 215430 TECHNICAL INFORMATION TYPICAL PROPERTIES ASTM C 957-87 - Standard Specification for High Solids Content. Cold applied elastomeric waterproofing membrane with integral wearing surface. PRODUCT D A T A SHEET COVERAGE RATES Vulkem 350-SL - 1.57m2/l for a thickness of 0.64mm Vulkem 345 - 2.63m2/l for a thickness of 0.38mm wet per coat. Broadcast an equal quantity of sand, yielding a .75mm thick coating. Vulkem 346 Topcoat - 4.9m2/l for a thickness of 0.20mm. AVALIBILITY Vulkem 350-SL/345/346 is available through your nearest Tremco office. Vulkem 350-SL/345/346 HEALTH & SAFETY PRECAUTIONS The Material Safety Data Sheet (MSDS) must be read and understood prior to use. TECHNICAL SERVICE TREMCO has a team of qualified Technical Sales Representatives who provide assistance in the selection and specification of products. For more detailed information or service and advice, call Customer Service on (02) 9638 2755 or fax (02) 9638 2955. GUARANTEE/WARRANTY TREMCO products are manufactured to rigid standards of quality. Any product which has been applied (a) in accordance with TREMCO written instructions and (b) in any application recommended by TREMCO, but which is proved to be defective, will be replaced free of charge. Any information provided by TREMCO in this document in relation to TREMCO’s goods or their use is given in good faith and is believed by TREMCO to be appropriate and reliable. However, the information is provided as a guide only, as the actual use and application will vary with application conditions which are beyond our control. TREMCO makes no representation, guarantee or warranty relating to the accuracy or reliability of the information and assumes no obligation or liability in connection with the information. To the extent permitted by law, all warranties, expressed or implied are excluded. TREMCO PTY LTD An Company ABN 25 000 024 064 Unit 1, 2 Park Rd, Rydalmere NSW 2116, Australia P: (02) 9638 2755 F: (02) 9638 2955 [email protected] www.tremco.com.au
© Copyright 2024