1. No category

seem 2
™
LED
mud-in drywall
FSM2L -XF
LUMINAIRE MUST BE INSTALLED PRIOR TO DRYWALL.
configurations are run specific, please consult factory drawings before beginning installation.
key
parts lists
focal point
included hardware
Corner Unit
power off
power on
mud flange (70005)
reflector screw (72010)
(8-32 X 5/16” FLAT
UNDERCUT HEAD SCREW)
(8-18 x 1/4 SELF TAPPING SCREW)
attention
U - individual
backer flange
(72001) (8-32X 3/8”
lens tool (A09052-01)
WASHER HEX HEAD SCREW)
(AFFIXED TO HOUSING. ONE PER RUN)
S - start of run
shipped installed
joiner bracket
assembly
tie-wire bracket
screw (72010)
I - intermediate
backer flange
(may be pre-installed
(72010)
)
or shipped loose
(8-18 x 1/4 SELF TAPPING
SCREW)
tie wire bracket
(12547)
(A11623-01)
lens end piece
(A08608)
E - end of run
mud flange
(shipped loose)
joiner pin
(70058)
BACKER FLANGE PLACEMENT GUIDE
drywall
orientation
guide point
position
3/8"
1
X
F
1/2"
1
X
E
5/8"
1
X
D
3/4"
1
X
C
7/8"
1
X
B
thickness
A
B
C
D
E
F
G
H
X
Y
orientation 1
Y
X
orientation 2
1"
1
X
A
11/8"
1
Y
G
11/4"
2
Y
F
13/8"
2
Y
E
11/2"
2
Y
D
15/8"
2
Y
C
13/4"
2
Y
B
17/8"
2
Y
A
2"
2
X
E
21/8"
2
X
D
1/2" drywall
A
B
C
D
E
F
G
H
X
orientation 1
1 /2 ”
5/8" drywall
A
B
C
D
E
F
G
H
X
orientation 1
5
/8 ”
Luminaires must be installed by a qualified electrician (check with local and national codes for proper installation).
To prevent electrical shock, disconnect electrical supply before installation or servicing.
IS0531 Rev. D
2014 ©Focal Point, LLC 4141 S. Pulaski Rd., Chicago, IL 60632 | www.focalpointlights.com
1 of 5
CEILING INSTALLATION (see page 4 for wall installation)
2
1
corner unit must be assembled
prior to ceiling installation.
3
using the backer flange
4
placement guide from
2'
page 1 determine the
proper placement of the
3' - 4'
backer flange for your
drywall thickness.
5' - 6'
if backer flanges were
7' - 8'
pre-installed skip to step 5
5
6
11
7
AVOID ALL CONTACT WITH LED SURFACE,
LEDs ARE EASILY DAMAGED!
individual installations skip to step 10
8
11
9
10
make electrical connection
Luminaires must be installed by a qualified electrician (check with local and national codes for proper installation).
To prevent electrical shock, disconnect electrical supply before installation or servicing.
IS0531 Rev. D
2014 ©Focal Point, LLC 4141 S. Pulaski Rd., Chicago, IL 60632 | www.focalpointlights.com
2 of 5
12
11
secure reflectors to housing
(4 screws per reflector)
13
ATTENTION
before beginning drywall
installation consult guide on
page 1 to ensure the backer
flange is set at the correct
make electrical connection
14
depth for the drywall.
AVOID ALL CONTACT WITH LED SURFACE,
LEDs ARE EASILY DAMAGED!
15
16
DRYWALL
DRYWALL
MUD
17
18
REFERENCE INSTRUCTIONS ON INCLUDED
TOOL FOR LENS INSTALLATION.
WALL INSTALLATION
1
4.25" min
4.625" max
2
using the backer flange
placement guide from
page 1 determine the
proper placement of the
2"x6" FRAMING
REQUIRED ON BOTH
SIDES OF OF HOUSING
backer flange for your
drywall thickness.
if backer flanges were
pre-installed skip to step 4
Luminaires must be installed by a qualified electrician (check with local and national codes for proper installation).
To prevent electrical shock, disconnect electrical supply before installation or servicing.
IS0531 Rev. D
2014 ©Focal Point, LLC 4141 S. Pulaski Rd., Chicago, IL 60632 | www.focalpointlights.com
3 of 5
3
2'
3' - 4'
5' - 6'
7' - 8'
4
5
6
8
9
x4
AVOID ALL CONTACT WITH LED SURFACE,
LEDs ARE EASILY DAMAGED!
individual installations skip
to step 9
7
OR
90˚ fitting required
make electrical connections
10
11
12
install
reflectors
secure reflectors
starting
to housing (4 screws
from bottom
per reflector)
ATTENTION
before beginning drywall
installation consult guide on
page 1 to ensure the backer
flange is set at the correct
make electrical connections
AVOID ALL CONTACT WITH LED SURFACE,
LEDs ARE EASILY DAMAGED!
depth for the drywall.
Luminaires must be installed by a qualified electrician (check with local and national codes for proper installation).
To prevent electrical shock, disconnect electrical supply before installation or servicing.
IS0531 Rev. D
2014 ©Focal Point, LLC 4141 S. Pulaski Rd., Chicago, IL 60632 | www.focalpointlights.com
4 of 5
13
14
15
DRYWALL
DRYWALL
MUD
16
17
REFERENCE INSTRUCTIONS ON INCLUDED
TOOL FOR LENS INSTALLATION.
DRIVER SERVICE
1
2
3
AVOID ALL CONTACT WITH LED SURFACE,
LEDs ARE EASILY DAMAGED!
Contractor is responsible for adequately reinforcing walls and/or ceilings to support luminaire weight. Focal Point, LLC accepts no responsibility for inadequately reinforced walls
and/or ceilings. The information contained in this drawing is the sole property of Focal Point, LLC. Any reproduction in part or whole without the written permission of Focal Point, LLC
is prohibited.
IS0531 Rev. D
2014 ©Focal Point, LLC 4141 S. Pulaski Rd., Chicago, IL 60632 | www.focalpointlights.com
5 of 5