Tumbling Star Rack This pattern is presented in two pieces due to space imitations. Cut out and tape these peices together at thte Match Lines before using. CUTTING: Cut Backer Board from 1/4" thick wood. Cut Stars from 1/2" thick wood. Cover an appropriate size area of wood with Transfer Paper (#CARB). Lay the pattern over the transfer paper and transfer each pieces cut lines onto the appropriate thickness of wood by simply tracing with a pen, pencil or stylus (#STY). Sand top edges of each Star as desired and remaining pieces to desired smoothness. Drill holes as noted. PAINTING: Use Delta brand (or equal quality) acrylic craft paint to paint the different areas as noted or colors of your choice. OPTION: For an aged look, lightly sand all painted surfaces. ASSEMBLY: (See ASSEMBLY DIAGRAM.) Locate and glue Stars to locations shown on Backer Board. Attach Sawtooth Hangers (#SAWH) to locations shown on Backer Board. Glue and insert Shaker Pegs (#PEG175) into holes drilled in Stars as shown. FINISHING: For maximum protection coat your project with at least two coats of our durable project sealer (#POLYQT). Hang on wall in desired location. Finished View Exclusive patterns provided by The Winfield Collection 8350 Silver Lake Rd. Linden, MI 48451 ( ) = Available from The Winfield Collection, 1-800-946-3435 1-800-946-3435 www.thewinfieldcollection.com BACKER BOARD SAWTOOTH HANGERS Copyright 2010 Delta Acrylic Paints used on this pattern COLOR 2078-STRAW 2123-BURGUNDY 2401-LIGHT IVORY 2416-LIBERTY BLUE SHAKER PEG ASSEMBLY DIAGRAM STAR 1/2" THICK (CUT 5) BACKER BOARD 1/4" THICK SAWTOOTH HANGER LOCATION ON BACKSIDE OF BACKER BOARD (2 PLACES) BURGUNDY DRILL 1/4" DIA. X 1/4" DEEP HOLE IN STAR FOR SHAKER PEG (TYPICAL) LIBERTY BLUE MATCH LINE ITEM# STAR Exclusive patterns provided by The Winfield Collection 8350 Silver Lake Rd. Linden, MI 48451 1-800-946-3435 www.thewinfieldcollection.com LIGHT IVORY MATCH LINE STRAW LIBERTY BLUE BURGUNDY Copyright 2010