FTTX Supporting Multiple Dwelling Unit (MDU) and In-Home Wiring Applications A Furukawa Company SlimBox™ Customer Splice Point (CSP) Module & External Internal The SlimBox™ Customer Splice Point (CSP) Module is an excellent choice as an internal or external demarcation closure, featuring dual functionality as either a splice or connector housing. Designed to resemble other typical wall outlets in a home, it is small and inconspicuous enough to satisfy the most discriminating homeowner, while protecting the valuable network splice sleeves or connectors inside. The version for indoor Internal SlimBox CSP Module applications is a neutral white color, while the external version is gray. The SlimBox CSP Module can be used for a wide variety of applications including Fiber-to-the-Home (FTTH) and Fiber-to-the-Business (FTTB) applications. When used in conjunction with indoor Optical Network Terminals (ONT) and the wall-hugging capabilities of OFS EZ-Bend® Optical Cable, the SlimBox CSP Module enables the network operator to provide a very clean, professional-looking installation at a very attractive price point. The SlimBox CSP Module can also be used as a simple, low priced fiber distribution box to distribute to multiple apartments or businesses for Multiple-Dwelling Unit (MDU) or retail shopping plaza applications. Versions are available for either primary indoor or primary outdoor use, and can accommodate most common fiber optic drop cable sizes including 900 micron, 3.0 mm, 4.8 mm, and flat drop cables. The outdoor version features a sealed cover. A separate splice tray will hold up to four splice sleeves (40 mm sleeves only), and either version accommodates up to 4 SC-APC connectors. Features and Benefits: www.ofsoptics.com • Common installation methods and procedures for both indoor and outdoor versions • Small and inconspicuous footprint (Versions as small as 6.5” (16.51 cm) length x 3.9” (9.91 cm) height x 1.18” (2.98 cm) depth) • Large space for slack storage • Tamper-resistant Key Component of • Splice protectors, plastic ties, and screws for typical wall-attachment included Fiber Optics to the X Ordering Information: SlimBox CSP Module Description SlimBox-H, Indoor CSP-4 Fiber SlimBox-H, Outdoor CSP-4 Fiber SlimBox-H, Outdoor CSP-2 Fiber Inside Adapter WSE4S-002-SBC0-GRY-SCAUNC-F SlimBox-H, Outdoor CSP-2F-SM-SCA-PT SlimBox-H, Outdoor CSP-2F-SM-SCU-PT Part Number 301040556 301040564 301099362 301098968 301079786 301079794 Accessories C6060A-4 Duplex Single Mode SC adapter 106817380 C6868A-4 Duplex APC (green) SC adapter 108223199 EZ-Bend Indoor SCA to SCA patch cord 3 meters in length JR4DW001SCASCA003M EZ-Bend Indoor/Outdoor SCA to SCA patch cord 3 meters in length JI4DK001SCASCA003M SlimBox, External Capping 25A 301102307 SlimBox, External Duct Cover 4 301102315 Internal SlimBox CSP Module Opened Use electronic files, available at: www.ofsoptics.com - Use less paper EZ-Bend is a registered trademark and FOX Solution and SlimBox are trademarks of OFS FITEL, LLC. For additional information, please contact your sales representative. You can also visit our website at www.ofsoptics.com or call 1-888-fiberhelp (1-888-342-3743) from inside the USA or 1-770-798-5555 from outside the USA. OFS reserves the right to make changes to the prices and product(s) described in this document at any time without notice. This document is for informational purposes only and is not intended to modify or supplement any OFS warranties or specifications relating to any of its products or services. Copyright © 2014 OFS Fitel, LLC. All rights reserved. OFS Marketing Communications fap-260-A4-1114 A Furukawa Company
© Copyright 2024