AR-LED-KIT Specifications The Archetype Large, PicoEmitter

AR-LED-KIT
The Archetype Large, PicoEmitter™ LED
Upgrade Kit
®
11/21/14 • kl_areledkit_spec.pdf
Type:
Job:
Catalog number:
Approvals:
/ /
LED Kit
Electrical Module
Option
Specifications
AR-LED-KIT
120 Light Emitting Diodes
Total Max System Watts = 129W
Maximum Weight = 50 lbs.
when installed in Archetype LED
Date:
Page: 1 of 5
Electronic Module: All electrical components are UL
recognized, mounted on a single plate and factory prewired with
quick-disconnect plugs. Module includes a driver, LifeShield®
temperature control device and surge protector. Electrical module
attaches to housing with no-tool hinges and latches, accessible by
opening the lens frame only. Driver is rated for -40°F starting and has a
0-10V dimming interface for multi-level illumination options.
Optical Module: Each precision, replaceable PicoEmitter™ is
positioned to achieve directional control toward desired task. The
entire EmitterDeck® fastens to the housing as a one-piece module.
(Listed To: UL 1598 Standard for Luminaires - UL 8750 Standard for
Safety for Light Emitting Diode (LED) Equipment for use in Lighting
Products and CSA C22.2#250.0 Luminaires.
NOTE: Existing product conditions are taken as the base point.
Participation rules apply. See complete warranty provisions for
further details.
LED EmitterDeck®
Front*
Back
Drilling
Templates
IMPORTANT: Disable all power to the luminaire before conducting
any maintenance or upgrade activity. Failure to do so will create a
hazardous working environment.
CAUTION: Fixtures must be grounded in accordance with national,
state and/or local electrical codes. Failure to do so may result in serious
personal injury.
Suggested Tools:
• C” Socket Wrench
• M” Wrench
• Hammer
• Drill Motor
• .626” (#20) Drill Bit
• Center Punch
• J” Drill Bit
Electronic Module
KIM LIGHTING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE.
© 2013 KIM LIGHTING • 16555 EAST GALE AVENUE, CITY OF INDUSTRY, CA 91745-1788• TEL: 626/968-5666 • FAX: 626/968-5716
AR-LED-KIT
The Archetype Large, PicoEmitter™ LED
Upgrade Kit
®
11/21/14 • kl_areledkit_spec.pdf
Type:
Job:
Page: 2 of 5
Standard Features
Fixture
Cat. No. designates fixture
and distribution
AR-LED-KIT
E
x
Upgrade Kit:
AR-LED-KIT
Distribution:
l 2 = Type II Full Cutoff
Optic:
E = PicoEmitter™
35
Current:
35 = 350 mA
l 3 = Type III Full Cutoff
l 4 = Type IV Full Cutoff
l 5 = Type V Square Full Cutoff
l L = Type L Left Full Cutoff
l R = Type R Right Full Cutoff
Light Distribution:
Electrical Module
TYPE IV
TYPE II
TYPE III
TYPE R
One-Way Right
TYPE L
One-Way Left
TYPE V
Cat. Nos. for Electrical Modules available:
120L
xK
x
Source:
120L = 120 LED’s
Voltage:
l 120 = 120V
Color Temperature:
l 240 = 240V
l 3K = 3000K
l 4K = 4200K
l 5K = 5100K
l 2K = 580nm - Amber
l 208 = 208V
l 277 = 277V
l 347 = 347V1
l 480 = 480V1
Due to current unavailability of 347V and 480V drivers, specification of these voltages may feature an integral
step-down transformer.
1
© 2013 KIM LIGHTING • 16555 EAST GALE AVENUE, CITY OF INDUSTRY, CA 91745-1788• TEL: 626/968-5666 • FAX: 626/968-5716
AR-LED-KIT
The Archetype Large, PicoEmitter™ LED
Upgrade Kit
®
11/21/14 • kl_areledkit_spec.pdf
Type:
Job:
Page: 3 of 5
Standard Features
0-10V Dimming Interface
Driver has a 0-10V dimming interface with a dimming range of 10-100%. Is compatible with most control
systems including Hubbell Building Automation wiHUBB™. Approved dimmers include Lutron Diva
AVTV, Lutron Nova NFTV and NTFTV. Note: Not compatible with current sourcing dimmers. Controls
compatible via Gray and Purple dimming lead.
Standard Input Black (+)
White (-)
Green (GND)
Gray Dimming Lead (-)
Fixture
Housing
Purple Dimming Lead (+)
30 mA Max
Optional Features
Neighbor Friendly Optic:
Cat. No.  NFO
 No Option
Integrated Neighbor Friendly Optic on each PicoEmitter™ module to
completely control unwanted backlight. Most effective with Type III and
IV distributions.
TYPE I
Fusing
Cat. No. (see right)
l No Option
TYPE
I II
TYPE
TYPE
II III
TYPE
TYPE
IV
TYPE III -NFO
TYPE III
-NFO
Forward
Throw
TYPE
TYPE IV
IV- NFO
TYPE IV
- NFO
TYPE
V
Forward
Square
Throw
High temperature fuse holders factory installed inside the fixture housing. Fuse included.
Line Volts:
Cat. No.:
120V
l SF
208V
l DF
240V
l DF
277V
l SF
347V
l SF
480V
l DF
© 2013 KIM LIGHTING • 16555 EAST GALE AVENUE, CITY OF INDUSTRY, CA 91745-1788• TEL: 626/968-5666 • FAX: 626/968-5716
Single Fuse
AR-LED-KIT
The Archetype Large, PicoEmitter™ LED
Upgrade Kit
®
11/21/14 • kl_areledkit_spec.pdf
Type:
Job:
Page: 4 of 5
Lumen Data
Projected Lumen Maintenance
Spectroradiometric
3000K Average
4200K Average
5100K Average
mA
100,000 hrs
2800K-3175K
3800K-4600K
4600K-5600K
350
93.17%
Color Rendering Index (CRI)
≥80
≥80
≥70
Power Factor
>.90
>.90
>.90
Correlated Color Temp. CCT (K)
(Calculated L70)
579,000 hrs
Electrical Drive Current
Volts - AC
Amps - AC
System Watts
120
1.08
129
208
0.62
129
240
0.54
129
277
0.47
129
347
0.37
129
480
0.27
129
B.U.G. Rating (TM15) in Lumens wher B = Backlight, U = Uplight, G = Glare
Temperature
TYPE 1
TYPE 2
TYPE 3
TYPE 3 NFO
TYPE 4
TYPE 4 NFO
TYPE 5
TYPE L/R
3000K
TBD
B2 U0 G2
B2 U0 G2
B1 U0 G2
B1 U0 G2
B1 U0 G2
B3 U0 G1
TBD
4200K
TBD
B2 U0 G2
B2 U0 G2
B2 U0 G2
B1 U0 G2
B1 U0 G2
B3 U0 G2
TBD
5100K
TBD
B3 U0 G3
B2 U0 G2
B2 U0 G2
B1 U0 G2
B1 U0 G2
B3 U0 G2
TBD
Temperature
TYPE 1
TYPE 2
TYPE 3
TYPE 3 NFO
TYPE 4
TYPE 4 NFO
TYPE 5
TYPE L/R
3000K
TBD
7555
7496
6391
7945
6636
8428
TBD
4200K
TBD
9773
9697
8267
10277
8584
10902
TBD
5100K
TBD
10478
10397
8864
11019
9204
11689
TBD
Absolute Lumens
LED performance and lumen output continues to improve at a rapid pace. Log onto www.kimlighting.com to download the most current photometric files from Kim Lighting’s IES File Library.For
custom optics and color temperature configurations, contact factory.
© 2013 KIM LIGHTING • 16555 EAST GALE AVENUE, CITY OF INDUSTRY, CA 91745-1788• TEL: 626/968-5666 • FAX: 626/968-5716
AR-LED-KIT
The Archetype Large, PicoEmitter™ LED
Upgrade Kit
®
11/21/14 • kl_areledkit_spec.pdf
Type:
Job:
Page: 5 of 5
HID To LED Upgrade Kit Warranty
When properly installed and under normal conditions of use, Kim Lighting warrants LED Upgrade Kit products (“Product(s)”) sold by
Kim Lighting to be free from defects for (i) a period of five (5) years for LED Light Engines (PicoEmitters),(ii) a period of five (5) years for
LED power components(LED Driver, LifeShield Device), (iii) a period of six (6) years for LED Light Engines (PicoEmitters) and (iv) for a
period of five (5) years for the re-used metal housing components of the existing luminaire from the date of sale of the LED Upgrade
Kit to the buyer as specified in Kim Lighting shipment documents for each Product(s). Conditions and limitations of the re-used metal
housing component warranty are as follows: 1) Existing luminaire must have been purchased within 10 years prior to the date of sale
of the Upgrade Kit, 2) Poles, arms, accessories, and options are excluded, 3) Products installed in harsh or hazardous environments
are excluded, 4) Warranty covers defects in material and workmanship in excess of the normal wear and tear to which the luminaire
can normally be expected to experience at the judgment of Kim Lighting from the baseline condition of the luminaire at the time of
installation and registration of the LED Upgrade Kit, 5) Owner must within 30 days of shipment of the LED Upgrade Kit by Kim Lighting register the project by emailing at least five (5) photo images of at least three (3) upgraded housings to [email protected]
referencing the project name and location, LED Upgrade Kit purchase order number, and approximate purchase date of the existing
housing(s). Failure to provide complete registration information within the required 30 days will dissolve the five year housing warranty. 6) Kim Lighting reserves the right to deny the five year metal housing component warranty extension upon review of the submitted
product images if the existing/original condition of the product indicates substantially excessive wear and tear beyond normal expectations given the product age. 7) Paint/finish of the fixture housing is excluded from this warranty for fixtures that have been installed for
more than ten (10) years prior to the application of and are not included as part of Kim Lighting warranty. The buyer agrees to make all
claims regarding defects or deficiencies in the Product(s) at the time of the claim. Valid warranty claims must be made within the warranty period specified herein above, and submitted within thirty (30) days of discovery of the damage or defect. No FIELD labor, repair,
DISMANTLE, or installation charges are included with this warranty. Kim Lighting may repair or replace any Product(s) covered by this
warranty at its sole discretion and in accordance with its procedure. Any unauthorized return, repair, replacement or modification of
the Product(s) shall avoid this warranty. This warranty applies only to the use of the Product(s) as intended by Kim Lighting and does
not cover any misapplication or misuse of said Product(s), or installation in hazardous or corrosive environments. In no event shall Kim
Lighting’s total liability for any reason arising hereunder exceed the purchase price paid to Kim Lighting for the product purchased by
the buyer hereunder. Contact Kim Lighting for complete warranty language, exceptions, and limitations.
© 2013 KIM LIGHTING • 16555 EAST GALE AVENUE, CITY OF INDUSTRY, CA 91745-1788• TEL: 626/968-5666 • FAX: 626/968-5716