1. No category

ÆRASmart
Decentralized high-efficiency
heat recovery unit.
For single rooms up to 40 m2.
Efficient and user-friendly
✓ Easy installation: 1 hole Ø100 mm.
✓ Drastic solution to humidity
and condensate problems.
✓ Ideal for refurbishment.
✓ Easy maintenance and cleaning: filters and
heat exchanger removable and washable.
High performance
✓
✓
✓
✓
High energy saving.
Double EC motors.
Tested thermal efficiency 75%.
Very low electrical consumption < 20 Watt.
4 season comfort
✓ Silent: sound power < 40dB(A).
✓ Integrated by-pass.
%
5
7Thermacly
n
e
i
c
i
f
Ef
ÆRASmart
Performance
WALL
HOLE SIZE THICKNESS
Ø mm
max (mm)
MODELS
m3/h
l/s
max
V
W
A
dB(A)*
LwA
LpA
MOTOR
TYPE
Standard Version
AERA Smart 100/400
AERA Smart 100/500
AERA Smart 100/600
100
100
100
400
500
600
27/53
27/53
27/53
7,5/15
7,5/15
7,5/15
230
230
230
8,3 / 28,3 0,075 / 0,207 48,3 / 59,4
8,3 / 28,3 0,075 / 0,207 48,3 / 59,4
8,3 / 28,3 0,075 / 0,207 48,3 / 59,4
27,7 / 39,3
27,7 / 39,3
27,7 / 39,3
EC
EC
EC
100
100
100
400
500
600
27/53
27/53
27/53
7,5/15
7,5/15
7,5/15
230
230
230
8,3 / 28,3 0,075 / 0,207 48,3 / 59,4
8,3 / 28,3 0,075 / 0,207 48,3 / 59,4
8,3 / 28,3 0,075 / 0,207 48,3 / 59,4
27,7 / 39,3
27,7 / 39,3
27,7 / 39,3
EC
EC
EC
MHY Version
AERA Smart 100/400 - MHY
AERA Smart 100/500 - MHY
AERA Smart 100/600 - MHY
* at 3 m in free field
Versions
Aera smart is designed for a 24 h running at the
minimum speed. The boost at the higher speed can
be manual (through remote push button / switch) or
automatic (through the humidistat).
Standard version: 24 h running at the minimum speed
and boost at the highest speed through remote control. The
highest speed is provided with a timer (adjustable from 0 to
30 minutes). Once the timer running cycle is over, the fan turns back
to operate at the minimum speed.
Operation
MHY version: 24 h running at the minimum speed and
boost at the highest speed automatically through the humidistat. The highest speed is reached progressively according
to the level of humidity detected by the humidity sensor. Once the
indoor humidity level turns back to the minimum pre-set level (adjustable on the hygrostat between 40 to 90% of relative humidity), the
fan automatically switches to the minimum speed. Also this version is
provided with an adjustable timer (from 0 to 30 minutes) which allows
to turn on the fan at the maximum speed. Such function is useful
when it is necessary to have the fan operating at the maximum speed
independently from the indoor humidity level.
Installation
Tubular exchanger
Fresh air intake
HORIZONTAL
Fug extraction
Fug exhaust
VERTICAL
Pre-heated
clean air intake
Dimensions (mm)
355
3 models with duct Ø100 mm for wall thickness upto:
≤ 600 mm
≤ 500 mm
≤ 400 mm
220
140
ÆRA Smart 100/600
ÆRA Smart 100/500
ÆRA Smart 100/400