Download Report

Interior Hardware & Trim
Prices subject to change
Co
Saoutchik
Coachwork Door Bumper
$15.50
BODY-0005
Rubber door bumper used on
Saoutchik bodied cars of the 1930's.
Material: Rubber; Length: 1.675;
Width: 1.385; Height: .492; Step
length: 1.295; Step width: .835; Step
height: .250
Co
Saoutchik
Coachwork Door Bumper, Long
$15.50
BODY-0006
Rubber door bumper used on
Saoutchik bodied cars of the 1930's.
Bumper Retaining Bracket
$25.75
MISC-0310
Laser cut retaining bracket used to
install a rubber door bumper. For use
on many classic cars of the early
1930's such as Duesenberg and
others.
Material: Steel; Finish: Natural;
Length: 1.260; Width: .806; Height:
.484; Thickness: .060; Holes: .205,
.336 centers
Co
Cord
Material: Rubber; Length: 1.995;
Width: 1.100; Height: .535; Step
length: 1.595; Step width: .725; Step
height: .335
Co
Murphy
Co
Door
Molded Rubber Round Door Bumper
$13.50
MISC-0022
Molded rubber round door bumper.
Measures 1 1/8 OD, 9/16 high
(approx.).
Body Door Bumper Sockets
$30.00
MB-0003
Murphy body door bumper sockets
CNC machined from solid aluminum.
Can be shortened to fit a specific
application. Both sockets have .030 lip
to overlap the door jams.
Co
1929-32
Available in two lengths:
Outside width: 1.355
Outside length: 1.719
Height: .488
Material: Steel; Finish: Chrome;
Bracket: 1.750 x 1.125; Bracket holes,
centers: .190, 1.375; Button OD: .375;
Button height: .359
Co
Dovetail
$165.00
CAD-0140
Chrome plated door jamb switch for
use on 1929 - 1932 Cadillac. Ready to
install.
Co
Hooper
Outside width: 1.355
Outside length: 1.106
Height: .488
Door Bumper Socket
$51.50
MISC-0068
Ideal door bumper socket. New fully
machined aluminum part to replace
original die cast Ternstedt Mfg. Co.
part. Used with a steel capped rubber
bumper, this dovetail socket has four
mounting holes to hold the socket to
the car body, has four holes tapped for
8-32 screws to retain the cover plate
and two pockets for bumpers.
Cadillac Door Light Switch
Body Door Hinge Bolt
$41.25
MISC-0274
Steel door hinge bolt for use on
Hooper bodied cars of the 1920's and
1930's.
Material: 4140 Steel; Finish: Natural;
Thread: BSF 5/16-22; Thread length:
.387; OAL: 1.667; Length under head:
1.425; Head OD: .768; Shaft OD: .387;
Square: .305
Available in two pocket sizes: 1/2" or
5/8". Outside dimensions: 3" long x 1
11/32 wide x 5/8 high. Interior
dimensions: 1 1/8 x 9/16 deep.
Version: 11/20/2014
Classic & Exotic Service, Inc., 2032 Heide, Troy, MI 48084 USA
1
Interior Hardware & Trim
Prices subject to change
Co
Hooper
Body Door Hinge Screw
$5.25
MISC-0277
This M7 x 1.00 door hinge screw has
an oversized shank for repairing worn
hinges. For use on Hooper bodied
cars of the 1920's and 1930's, such as
some Hispano Suizas.
Material: Steel; Thread: M7 x 1.00;
Thread length: 8mm; OAL: 26mm;
Head OD: 9mm; Head height: 5mm;
Shaft: 7mm; Length under head: 21mm
Co
Murphy
Body Footman Loop
$36.25
MB-0020
Bronze footman loop used on many
Murphy bodied cars. Used to hold
door check strap to door and body.
Plug Spring
$7.75
MISC-0249
Return spring for Dawson plugs for
side curtain rods on open car bodies.
Material: Steel; Length: 3.437; OD:
.312; Wire: .020
Co
Murphy
Body Rear View Mirror Bracket Clamp
Plate
$51.50
MB-0018
Bronze clamp plate used to hold the
rear view mirror on the windshield of
Murphy bodied cars.
Material: Bronze; Finish: Natural;
Length: 2.032; Width: .375; Cut out ID:
.562; Hole ID: .206; Hole centers:
1.453; Thickness: .064
Material: Bronze; Finish:
Natural;Length: 3.105; Width: .632;
Height: .687; Stud holes: .272; Hole
centers: 2.375; Bar length: 1.666
Co
Hispano
Co
Dawson
Suiza Interior Door Handle Bezel
$139.25
HIS-0123
Brass interior door handle bezel for
use on Hispano Suiza J-12.
Co
Murphy
Body Mirror Mount
$62.00
MB-0019
Murphy body mirror mount. For use
on Duesenberg Model J and other
cars with Murphy coachwork.
Material: Brass; Finish: Natural;
Thread: M25 x 1.25; Thread length:
5mm; Length: 19mm; OD: 44.5mm;
ID: 17mm; Large ID: 15mm; Mid ID:
22mm
Co
Upholstery
Co
Murphy
T-Nail
$5.25
FS014-0001-S
Chrome plated T-nail used for wire-onbinding corners on many cars.
Material: Steel; Finish: Chrome; OAL:
1.105; Length under head: .890; Shaft
OD: .072; Head: .260 x .632 x .215
Version: 11/20/2014
Body Rear View Mirror Bracket
$77.25
MB-0017
Rear view mirror windshield mounting
bracket for the Beverly and other
closed Murphy bodied cars. Can be
adapted for use on a roadster.
Material: Bronze; Finish: Natural;
Thread: 10-24; OAL: 2.730; OAW:
2.410; Oval end: 2.410 x .750; Holes &
centers on oval: .215 ID x 1.625
centers; Cut out ID: .625; Holes &
centers for threaded holes: 1.453
Classic & Exotic Service, Inc., 2032 Heide, Troy, MI 48084 USA
2
Interior Hardware & Trim
Prices subject to change
Co
Murphy
Body Mirror Bracket Clamp Screw
$25.75
MB-0018-1
Brass knurled screw used with the
rear view mirror bracket & clamp on
Murphy bodied cars.
Material: Brass; Finish: Natural;
Thread: 10-24; Thread length: .343;
OAL: .862; Length under head: .625;
Head OD: .585; Body OD: .375, .242
long
Co
Tucker
Accelerator Pedal
$103.00
TUC-0007
CNC Machined rubber accelerator
pedal for Tucker. This part does not
have a steel back plate and will need
to be glued to the original back plate.
Material: Rubber; Length: .625; Width:
2.032; Thickness: .250
Co
Brewster
Coachwork Front Seat Locating Socket
$36.25
MISC-0214
Aluminum locating socket mounted to
the body to prevent the seat from
sliding. Used on Brewster bodied cars
such as: Rolls Royce PI andP II. 2
used per seat. Original part number
17526.
OD: 1.946; Height: .182; Holes ID:
.200; Center ID: .750
Co
Packard
V-12 Rear Sill Plates
$77.25
P-0073
New photo engraved rear sill plates to
fit many Series and models of Packard
V-12. These perfect reproduction sill
plates have been photo-etched into
.032 brass and are exact duplicates of
the original Packard parts. The plates
are ready to be drilled and plated.
Rear plates are 1.375 x 17.187.
Rear sill plates will fit:
15th,16th & 17th Series 7 Pass.
Touring Sedan
15th, 16th & 17th Series 7 Pass.
Touring Sedan Limo
15th, 16th & 17th Series 5 Pass. Club
Sedan
15th, 16th & 17th Series 5 Pass.
Convertible Sedan
17th Series 5 Pass. Victoria
Original Packard part numbers:
224307 (right) and 224308 (left).
Co
Packard
V-12 Front Sill Plates
$92.75
P-0072
New photo engraved sill plates to fit
many Series and models of Packard V12. These perfect reproduction sill
plates have been photo-etched into
.032 brass and are exact duplicates of
the original Packard parts. The plates
are ready to be drilled and plated.
Front sill plates are 2.562 x 34.935.
and will fit 1935 V-12 Convertible
Sedan. Original Packard part
numbers: 224317 (right) and 224318
(left).
Co
Stutz
Door Sill Plate, Long
$144.25
STZ-0016
Brass engraved door sill plate for use
on 1931 Stutz Model M.
Material: Brass; Length: 36.0; Width:
2.516; Thickness: .042; Height: .553;
ID Bend: .218
Version: 11/20/2014
Classic & Exotic Service, Inc., 2032 Heide, Troy, MI 48084 USA
3
Interior Hardware & Trim
Prices subject to change
Co
Stutz
Co
Murphy
Door Sill Plate, Short
$144.25
STZ-0017
Brass engraved door sill plate for use
on 1931 Stutz Model M.
Material: Brass; Length: 18.00; Width:
2.482; Thickness: .042; Height: .617;
ID Bend: .218
Co
Murphy
Body Door Sill Plates
$133.00
MB-0010
Door sill plate to fit all Murphy bodied
cars of the 1920's and 1930's. These
sill plates are an exact duplicate of the
original shape, are made from .040
thick brass and measure 35 X 2 or 35
X 2 3/4". The Murphy logo is stamped
into the brass in the center of the plate.
These sill plates are produced to be
trimmed to fit and drilled by the
purchaser. They will also need to be
polished and plated by the purchaser.
Co
Auburn
Boattail Speedster Sill Plate
$154.50
AUB-0005
Aluminum sill plate for use on Auburn
Boattail Speedster. Sill plate has an
etched-in design and is an exact
duplicate of an original sill plate.
Material: Aluminum; Finish: Natural;
Length: 32.00; Width: 3.062;
Thickness: .052; Inner bend DIA: .557;
Width before bend: 2.00; Width after
bend: .312
Co
Maserati
Ghibli Sill Plate
$130.00
MAS-0002
Universal aluminum sill plate for
Maserati Ghibli. Fits left and right side
of the car, but will need to be polished
and trimmed to fit before installation.
Maserati part number 115B064950.
Material: Aluminum; Finish: Natural;
Width: 1.727; Length: 36.00;
Thickness: .050
Version: 11/20/2014
Sun Visor Acorn Nut
$33.00
MB-0014
Acorn nut to hold sun visor frame to
inner bracket. This is an exact
duplicate of the original "Murphy" head
profile.
Material: Steel; Thread: 5/16-18; Hex:
.562 x .450 high
Co
Murphy
Sun Visor Right Bracket
$33.00
MB-0012-R
Steel bracket to mount sun visor on
right side of windshield frame. Offset
design to accommodate internal
tensioner in visor frame. For use on all
Murphy bodies using sun visors.
Requires expanding tensioning sleeve
to be installed after drilling mounting
holes and polishing prior to chrome
plating.
Finish: Natural; Thickness: .118;
Head OD: .935; Length: 2.500; Width:
1.000
Co
Murphy
Sun Visor Left Bracket
$33.00
MB-0012-L
Steel bracket to mount sun visor on
left side of windshield frame. Offset
design to accommodate internal
tensioner in visor frame. For use on all
Murphy bodies using sun visors.
Requires expanding tensioning sleeve
to be installed after drilling mounting
holes and polishing prior to chrome
plating.
Finish: Natural; Thickness: .118; Head
OD: .935; Length: 2.500; Width: 1.000
Co
Murphy
Body Sun Visor Glass
$231.75
MB-0009
Green tinted sun visor glass color
matched to the original tint used on
Murphy bodied cars. Sold in a 21" x 7
3/4" x 7/32" thick sheet. Buyer must
cut glass to size prior to installation.
Classic & Exotic Service, Inc., 2032 Heide, Troy, MI 48084 USA
4
Interior Hardware & Trim
Prices subject to change
Co
Murphy
Co
1953
Sun Visor Frame
$460.00
MB-0007
Cast bronze sun visor frame as used
on many Murphy Body Co. bodies.
Can be used on the right or left side.
For use on all Murphy bodies and
could be adapted to most windshields.
Co
Murphy
Sun Visor Inner Bracket
$33.00
MB-0012
Steel bracket to mount sun visor on
Murphy bodied cars. Mounts on the
windshield frame to support sun visor.
For use on all Murphy bodies using
sun visors.
Bracket is not drilled for mounting
holes as these can vary from car to
car.
Finish: Natural; Hole ID: 3/8; Head
OD: 15/16; Length: 2.500; Width:
1.000; Thickness: .118
Co
Ghia
For Packards Series 2250-77, 235277, 2350-97.
Co
1932-33
Cadillac Sun Visor Washer
$12.50
CAD-0118
Laser cut steel washer for sun visor
arm in 1932 - 1933 Cadillac & LaSalle.
Cadillac part number 4206905, group
number B3.1955.
For use on all closed body style
Cadillac and LaSalle in Series: 345
B,C; 355 B, C; 370 B, C; 452 B.
Material: Steel; Finish: Natural; OD:
6.25; Thickness: .103; ID: .385 x .267
Body Sun Visor Plastic
Varies
MISC-0160
Dark amber tinted plastic sun visor
material. Duplicate of visor material
originally used by Ghia in the midfifties and possibly used by other
European coach builders.
This item is available in custom sizes
up to 24" x 24" priced at $.75 per
square inch, rounded to the nearest
inch. Contact us directly to order
custom sized visors.
Co
1953
Packard Caribbean Sun Visor Arm
$56.75
P-0004
Bronze reproduction of sun visor arm.
This is a replacement for the fragile
and difficult to replate die cast part
used on 1953 Packard and other cars.
Two arms required per visor. Packard
part number 385576, "Bracket, Sun
Visor".
Packard Caribbean Sun Visor Mount
$56.75
P-0003
Bronze reproduction of sun visor
mount, machined and ready for
plating. This is a replacement for the
fragile and difficult to replate die cast
part used on 1953 Packard and other
cars. Two mounts required per visor.
Packard part number 385576,
"Bracket - Sun Visor".
Co
Door
Window Flapper Hinge
$77.25
MISC-0324
Special hinge with 5/8" knuckles to
cover the window opening when the
window is rolled down. Sold in a five
foot length - trim to fit application.
Material: Steel ; Length: 5ft;
Thickness: .038; Knuckle: .625; Pin
DIA: .093; Open width: 3.000
Co
Window
Flapper Spring #1
$8.75
MB-0001
Stainless steel spring for closing
window flappers. Commonly used on
Murphy bodies, this style has clock
wise wind & long ends coming off on
the same side. Also used by Brunn,
Rollston, LeBaron and others.
Measures 1.260 with a .218 OD wire.
Wire thickness is .040. Ends can be
trimmed and bent if needed.
For use on Packards Series 2250-77,
2352-77, 2350-97.
Version: 11/20/2014
Classic & Exotic Service, Inc., 2032 Heide, Troy, MI 48084 USA
5
Interior Hardware & Trim
Prices subject to change
Co
Window
Co
Tucker
Flapper Spring #2
$8.75
MB-0002
Stainless steel spring for closing
window flappers. Commonly used on
Murphy bodies, this style has counter
clockwise wind with long ends coming
off on opposite sides. Also used by
Brunn, Rollston LeBaron and others.
Measures 1.130 OAL with a .218 OD
wire. Wire thickness is .040. Ends can
be trimmed and bent if needed.
Co
Window
Flapper Spring #4
$8.75
MB-0005
Stainless steel spring for closing
window flappers. Commonly used on
Murphy bodies, also used by Brunn,
Rollston, LeBaron and others.
Measures .584 OAL with a .224 OD
wire. Wire thickness is .040. Ends can
be trimmed and bent if needed.
Co
Window
Flapper Spring #3
$8.75
MB-0004
Stainless steel spring for closing
window flappers. Commonly used on
Murphy bodies, this style has
clockwise wind with long ends coming
off on opposite sides. Also used by
Brunn, Rollston, LeBaron and others.
Measures .935 OAL with a .169 OD
wire. Wire thickness is .034. Ends can
be trimmed and bent if needed.
Co
Tucker
Instrument Cluster Panel
$669.50
MISC-0207
Tucker plastic instrument cluster
panel. CNC machined from cast
acrylic plastic. Excellent reproduction,
ready to install.
Radio Grille
$309.00
TUC-0006
CNC machined replacement radio
grille as used on Tucker automobiles.
Ready to be chrome plated and
installed.
Tucker part number 200912.
Material: Aluminum; Finish: Natural;
Length: 6.090; Width: 6.016; Height:
.396; Gaps: .250; Mounting holes:
.193; Hole centers: 5.207, 5.724
Co
Rolls
Royce P1 Instrument Light Housing
$77.25
RR-0020
Instrument light housing used on Rolls
Royce Phantom I. Cadmium plated
and cast from bronze.
Material: Bronze; Finish: Cadmium;
Base: 2.035 L x 2.152 W; Top OD:
1.220; Top ID: .937, .750; Base
height: .625; Holes: .215
Co
Duesenbeg
Model A Dashboard Ignition Plate
$300.00
A-3090
Nickel plated brass ignition plate for
use on the dashboard of Model A
Duesenberg. The recessed back
ground can be filled with black paint
as substitute for glass enameling.
Material: Brass; Finish: Nickel plated;
OAL: 4.425; OAW: 2.627; Top hole:
.800; Top-bottom centers: 3.024;
Bottom hole: .830; Mid holes: .530,
1.025 centers
Co
Instrument
Board Light Switch Nut
Brass: 5.25, Chrome: 15.50
MISC-0252
Knurled brass instrument board switch
nut. Used with light switches installed
on many cars of the 1930's and 1940's.
Available in natural brass or chrome
plated.
Material: Brass; Finish: Natural or
chome; Thread: 3/8-27; OD: .565;
OAH: .187; Knurling height: .140
Version: 11/20/2014
Classic & Exotic Service, Inc., 2032 Heide, Troy, MI 48084 USA
6
Interior Hardware & Trim
Prices subject to change
Co
Duesenberg
Instrument Panel Brass Moulding
$92.75
J-5428
Brass J-shape molding used to finish
Duesenberg instrument panels. Can
also be used as binding molding for a
variety of vintage cars and boats.
47 " long x 1.062 high x .032 thick.
Co
Auburn
Dash High/Low Ratio Switch Cover
$103.00
MISC-0169
Backing plate for the High/Low Ratio
lever on the dashboard of 1932 - 1933
Auburn V-12's using a two speed rear
end. May also fit other years and
models of Auburn. Finished in brass
and requires chrome plating prior to
use.
Material: Brass; Finish: Natural; ID:
.890; Thickness: .140; Width: 1.940 at
the widest, .687 at the narrowest
Version: 11/20/2014
Classic & Exotic Service, Inc., 2032 Heide, Troy, MI 48084 USA
7