Tellabs 1000 Multiservice Access Platform (MSAP) ®

TELLABS DATA SHEET
Tellabs® 1000 Multiservice Access Platform (MSAP)
LET Power Supply Unit (L-PSU) Plug-in Card
Overview
The Tellabs® 1000 Multiservice Access Platform (MSAP) LET
Power Supply Unit (L-PSU) plug-in card converts the -48 V local
exchange battery input into the ±5 V and -32 V required by the
common control equipment and line cards in the Tellabs 1000
MSAP Local Exchange Terminal (LET).
L-PSU
FAIL
ACTV
FUSE
The L-PSU uses a DC-to-DC switching converter for high
efficiency and low thermal dissipation. Only one L-PSU is
required to power each Tellabs 1000 MSAP LET shelf;
however, a card slot is provided for a redundant L-PSU.
The L-PSU features two GMT fuses for redundant source
coordination. The first fuse protects the DC-DC converter,
and the second fuse protects the -48 V DC output.
Features and Benefits
High-efficiency switching DC-DC converter
n
Reverse polarity protection
n
Overvoltage/overcurrent shutdown
n
Low-voltage alarm
n
Low thermal dissipation
n
LEDs on the faceplate of the IMA card indicate
the following conditions:
Green ACTV — the plug-in card is active
n
Red FAIL — the plug-in card has failed
n
Red FUSE — failed fuse on the plug-in card
n
The unit also provides alarm and status indications to the CPU.
Test jacks on the front panel can be used to monitor the
system voltages.
Tellabs® 1000 Multiservice Access Platform (MSAP)
LET Power Supply Unit (L-PSU) Plug-in Card
See Tellabs.com for more information about Tellabs Solutions
DATA SHEET
TELLABS® 1000 MULTISERVICE ACCESS PLATFORM (MSAP)
LET POWER SUPPLY UNIT (L-PSU) PLUG-IN CARD
Specifications
DC-DC Converter
Output Current
Input: -40 V DC to -56.5 V DC
n
Output: +5.15 V DC ± 1.5%
n
n
n
Dimensions
+5 V DC, 15 A
n
-5 V DC, 2 A
n
Height: 5.125 in (13.018 cm)
-32 V DC, 3 A
n
Width: 1.0 in (2.54 cm)
– -5.15 V DC ± 10.0%
n
– -32.0 V DC ± 10%
n
-48 V DC, 2 A
n
– -39 V DC to -56.5 V DC
n
Total available output power: 150 W
Compliance
n
Isolation
n
Output Regulation
n
Low-voltage disconnect: -38 V DC
± 5.15 V DC
n
< 1.5% load
n
Output ground: Referenced to positive
battery input
Environmental
n
Ripple and Noise
± 5 V DC
n
1.0% peak-to-peak,
n
Conducted Noise: GR-1089-CORE
n
< 0.20% per specified temp range
n
Weight: 1.0 lb (0.45 kg)
Internal converter: 500 V input to output
< 1.5% line
n
Depth: 10.5 in (26.67 cm)
Operating temperature: -40° F to +149° F
(-40° C to +65° C)
Relative humidity: 5%–95%,
noncondensing
n
-32 V DC @ 100 mV peak-to-peak
n
Take the next step. Contact Tellabs today.
+1 800 690 2324
+1 630 798 9900
www.tellabs.com
1415 West Diehl Road
Naperville, IL 60563
U.S.A.
TEL9473 11/14
© 2014, Tellabs Access, LLC. All rights reserved.
See Tellabs.com for more information about Tellabs Solutions