PRODUCT SPECIFICATION 24.11.2014 1/2 SM6.21 Name: Connector for insulated/bare cond. AL 16-95mm² and Cu 6-35mm² Type: SM6.21 EAN: 6418677403989 Description: SM6.21 is equipped with springs made of stainless steel to make the installation easier. The connector has teeth in one groove, only. Package: Unit: PCS Technical specification Electrical values Test voltage 4 kV / 50 Hz / 1 min Mechanical Breaking torque 160 Nm Tightening torque 20 Nm Dimensions Weight 0.16 kg Branch conductor Cu 6-35 Main conductor Al 16-95 Drawing markings d1 7-16 d2 2.8-7.5 Use: Used for aluminium to copper connections. The design enables hot line installation without peeling the insulation of the conductor. Construction: Component Material Body Corrosion resistant aluminium alloy, tensile strength 300 N/mm² Allen screw Stainless steel Cover Weather and UV-radiation resistant plastic The connector is brushed and greased. The stainless steel springs hold the connector parts open during the installation. Ensto Finland Oy Ensio Miettisen katu 2 P.O.Box 77 06101 Porvoo, Finland Tel. +358 204 76 21 Fax +358 204 76 2770 This product card has been printed from Ensto´s web-pages. Please, observe our legal notice on the front page of www.ensto.com. www.ensto.com © Ensto 2014 PRODUCT SPECIFICATION 24.11.2014 2/2 SM6.21 Installation: Remove conductor inlet caps according to the connection to be made. Open the upper lid. Unscrew the allen screw to be able to place the conductors into the connector. Tighten the screw to 20 Nm torque. Replace the upper lid. Tools required: Hex head wrench ST 32, fork wrench ST 34. Markings: SM 6.2, Al 16 - 95 mm², Cu 6 - 35 mm² Standard: SFS 2663, SFS 4644, VDE 0220 Teil 3/10.77, Certificate FI 171026 - 01 Test certificate ÖVE - 19136/E Ensto Finland Oy Ensio Miettisen katu 2 P.O.Box 77 06101 Porvoo, Finland Tel. +358 204 76 21 Fax +358 204 76 2770 This product card has been printed from Ensto´s web-pages. Please, observe our legal notice on the front page of www.ensto.com. www.ensto.com © Ensto 2014