Snap-N-Seal® ProSNS® Compression Connectors for RG-6 Coaxial Cable A BELDEN BRAND ® ® Specifically designed to combine the patented technologies of our Snap-N-Seal and F-Conn connectors ® to provide ease of installation and quality performance, Snap-N-Seal ProSNS™ connectors deliver a reliable connection for a variety of applications. Snap-N-Seal® ProSNS® Universal Connectors: Series 6 FSNS6U • Fits most non-plenum RG-6 coaxial cables including 60% braid, tri-shield and quad-shield. • TRUE 360° compression onto the cable providing superior RF shielding performance, -85 dB effective shielding (typical on 60% bonded foil cable). • An additional O-ring placed at base of the connector with a NiTin finish and UV resistant plastic provides a reliable, environmentally sealed product. FSNS6BNCU • Low insertion force is required to compress the connector onto the cable. • The improved design offers the flexibility to be installed with nearly all available compression tools. FSNS6RCAU • Installation requires the industry standard 1/4”-1/4” cable preparation. • Meets or exceeds all SCTE standards. ProSNS® Universal F Connector • A patented, removeable plastic sleeve guide is designed to assist with insertion of the cable center conductor to simplify installation. As the cable center conductor is inserted into the back end of the connector, the removeable plastic guide is pushed forward and out from the front end of the connector. When the guide is completely pushed out from the front of the connector, it will detach and fall out. This feature is to guide the insertion of the cable and help identify when the center conductor is fully and properly inserted into the connector. • A patented internal O-ring at the base of the nut facilitates a free-spinning nut design to ease installation. Detachable Plastic Sleeve ProSNS® Universal BNC Connector • A patented 360º floating-pin basket is incorporated into the design of the connector. By positioning the pin basket at the back end of the connector, the insertion of the cable center conductor is easier and more accurate. Once the pin basket is properly seated inside the connector, it is then compressed around the cable center conductor by an outer plastic sleeve. Floating Pin ProSNS® Universal RCA Connector • A patented removeable plastic sleeve guide is also a design feature of the connector. The plastic guide is attached to the front of the RCA pin. As the cable center conductor is inserted into the RCA pin and pushed forward, the removeable plastic guide is pushed up and out of the front end of the connector. The plastic guide will need to be detached and removed from the RCA pin, once the cable and pin are properly inserted into the connector. Recommended Installation Tools Cable Pro® CPLCCT-SLM FSNS6U Cable Pro® CPSNSCT-596 FSNS6BNCU ProSNS® 59 and 6 Series connectors are also available in retail packaging when ordered with [Part Number]-R. FSNS6RCAU Bandwidth 0 MHz to 3 GHz Bandwidth 0 MHz to 3 GHz Bandwidth 0 MHz to 3 GHz Impedance 75 Ohms (nominal) Impedance 75 Ohms (nominal) Impedance 75 Ohms (nominal) Rev 1 6176 East Molloy Road • East Syracuse, NY 13057-0278 • Tel: 315-431-7200 • Fax: 315-431-7201 • E-mail:[email protected] • www.ppc-online.com
© Copyright 2024