HID Indoor CoolPower - Micro20/35 Designed and manufactured in the UK • Rapid Start • Remote Mounting • Operates CMH, CDM, CDM-Tm, HCI & Britespot • Max lamp-ballast distance 15m • Ignition voltage <2.5kV • Microprocessor controlled • Class II insulation • ENEC approved (pending) • Thermal protection • 88% efficient • Screw-less cable clamp assembly • Fits through 58mm diameter cut out • Compact and lightweight - only 155gms* *20W and 35W models Lamp compatability Technical Specification CMH / T / TC / Supermini / MR16, CDM / T / TC / Tm / R, HCI / T / TC / Tf, Britespot Part Number Lamp Type Micro20-240-C Micro35-240-C CMH/T/TC/MR16 Supermini CDM/T/TC/Tm HCI/T/TC/Tf CMH/T/TC/MR16 CDM/T/TC/Tm/R HCIT/TC/BriteSpot Lamp Power Rating 20W Power consumption 24W 39W 43W AC voltage range limit 200V - 265V AC Mains frequency range 47 - 63Hz 152.4 >0.95 Power factor <2.5kV PK Ignition voltage 160Hz Nominal lamp operating frequency Lamp current waveform Square Wave Max. distance from lamp (max. cable capacitance) 15m** 2nF 142.4 80C° Max. case temperature Tc 85°C -20°C to + 50°C Ambient temperature Ta Weight 155gms 160gms Max no. of ballasts 100/45 50/22 per type C 16A/6A circuit breaker 31.50 HID Indoor INDOOR The lighting solution for commercial environments EN61347-2-12:2005, EN61000-3-2:2000, EN61000-33:2001, EN61547:2000, EN55015:2006 Safety standard Compliance 47.60 **Harvard HID ballasts employ a unique lamp striking method which allows the lamps to be mounted further away from the ballast than with conventional gear or any other type of electronic ballast. If you ensure the cable capacitance is within the limit specified, you will be able to achieve reliable starting at extended distances. The cable must be 2 core and earthing to the lamp head/luminaire should be routed separately to the lamp wires. Consult factory for approved cable specification www.HarvardEng.com Harvard Engineering plc Tyler Close Tel: +44 (0)113 383 1000 Data Sheet No.HIDI3 V1 RB Normanton Wakefield Fax: +44 (0)113 383 1010 WF6 1RL UK