1. No category

Altech tilbakeslagssikring kategori 3
Monteringsanvisning og FDV-dokumentasjon
Dimensjon 1 /2 ” og 3 /4”
Generelt
INNHOLDSFORTEGNELSE
Innledning
Altech tilbakeslagssikring kategori 3
Altech tilbakeslagssikring er utviklet og godkjent
for å beskytte rent drikkevann mot forurenset
vann i henhold til NS-EN 1717 etter kategori 3 (CA).
Generelt
s.
3
Virkemåte
s.
4
Installasjon
s.
5
Vedlikehold
s.
5
Tekniske spesifikasjoner
s.
6
Sortimentsoversikt
s.
7
Tilbakeslagssikringen er egnet for installasjoner
hvor tilbakeslag av forurenset væske utgjør en
viss helsefare, fordi den inneholder ett eller flere
skadelige stoffer.
Anbefalt konstruksjon for tilbakeslagssikring
i denne kategorien er at modulen er inndelt i
3 soner: En motstrømstrykksone, en mellomtrykksone med atmosfærisk trykk (drenerings­
åpning) samt en medstrømstrykksone.
Ventilens innvendige komponenter
Ved tap av vanntrykk i tappevannsystemet og/
eller motstrømsovertrykk fra for eksempel et
varmeanlegg vil tilbakeslagssikringen kontrollert
drenere ut det forurensede vannet gjennom
mellomtrykksonen.
Produktene er godkjent av SI NTEF
2
Altech tilbakeslagssikring
Altech tilbakeslagssikring
3
dental
flooding. recommends that the CA backflow protection device should be inspected at least once a year.
Watts
Industries
• Provide
a suitableofpipe
to drain the
evacuation
of the
which
the (sand,
devicecopper
could possibly
drain. is revealed with a
The
first indication
malfunction,
generally
caused
by fluid
foreign
debris
or calcium…),
• Check theleak
discharge
pipe
to ensure you of the correct operation of the flow.
permanent
from the
drain.
• During
installation
it isatnecessary
respect
the direction
of flow indicated
by the
arrow on the
of the
device.
In
the case
of leakage
the drain, to
it is
recommended
to generate
a major flow
of circulation
by body
opening
some
taps
for
a few
minutes: this
is often
sufficient
to expel
anythe
foreign
debris
and bring
everything
backafter
to normal
situation.
• For
the protection
of the
public
main water
supply,
backflow
preventer
must
be installed
the water
meter,
whereas
order to
the private
water
should
at the
limitbut
of the
areas where
This
leak isinmerely
anprotect
early warning
andinternal
definitely
doesnetwork,
not put itthe
safetybeofinstalled
the device
at risk,
it requires
remothere
may
be contamination,
for the
example:
filling
of the central heating …
ving
and
cleaning
the device and
upstream
strainer.
First check valve
Virkemåte
Installasjon
BACKFLOW PROTECTION DEVICES
BACKFLOW PROTECTION DEVICES
Altech tilbakeslagssikring kategori
3 består av to tilbakeslagsventiler,
Second check valve
drenering ogDiaphragm
filter i en modul.
Tilbakeslagsventil 1 er plassert på
Seat
Discharge
opening
tappevannsiden,
og
tilbakeslagsventil 2 mot den delen av systemet
CA 9C
Standardization
Water flow
som er en potensiellCA
forurensningskilde.
9C
Standardization
The
protection
device has
been
The pressure
in CA
the 9C
water
supply network
ensures
The
CA 9Cinprotection
device
has been
developed
with opening
EN1717.
The CA 9C offers a simple andthat
an the diaphragm
keepsconformity
the discharge
developed in conformity with EN1717.
The
CA 9C
offers aagainst
simple pollution
and an of
efficient
protection
closed; then the first check valve is released from
efficient
protection
againstsystem.
pollution of
Installation
the drinking
water supply
the diaphragm.
The water instructions
flows to the second
Installation
instructions
the
water
supply
system.
Install
the
CA 9C
protection
Thisdrinking
protection
device
prevents
check valve via the
middle
chamber
anddevice
lifts it
Statisk trykk, ingen gjennomstrømning
Install
the CA
9C protection
device
This
protection
device
prevents
according
to national
installation
backflow
of polluted
water
fromfrom
flowing
its seat.
Begge tilbakeslagsventilene
er
lukket,
og
dreneringsåpningen
holdes
according
to
national
installation
backflow
of
polluted
water
from
flowing
instructions.
back into the drinking water supply
instructions.
back
into
the
drinking
supply
system
(fluid
class
3). water
The CA
9C has
stengt av trykket som fortsatt
er
i ventilen.
system
class 3).
Theconstruction
CA 9C has
a double(fluid
non-return
valve
CA
a
double
non-return valve
with
an intermediate
relief construction
valve and
CA
with
intermediate
valve
and
offersanprotection
withrelief
regard
to Static
backstate
offers
protection
regard to backsiphoning
as wellwith
as backflow.
Both check valves are now closed. The discharge
siphoning
wellespecially
as backflow.
The CA 9Caswas
developed
opening is always held closed.
The
CA 9C connections
was especially
developed
for smaller
to the
water
for
smaller
connections to the water
supply
system.
supply system.
Strainer
Strainer
First check valve
First check valve
Ventilens posisjon ved statisk trykk
Back-siphoning
When the pressure in the water supply network
falls, the second check valve closes against the
seat. The first check valve closes against the
Normal gjennomstrømning
diaphragm, the discharge opening opens to the
Tilbakeslagsventil 1 åpnes først, ogSecond
dette
generererintermediate
åpning avzone,
tilbakeslagsventil
2.
once enough overpressure
is
check valve
Second check
valve
created. This
creates an atmospheric
Vanntrykket sørger for å holde ventilens
dreneringsåpning
lukket.
Diaphragm
Seat
"interference" between the water supply network
Discharge
Diaphragmopening
Seat
and the contaminated water downstream. If the
Discharge opening
Water
flowis contaminated, seepage is
check valve
Water
flow in the water supply network ensures
The
pressure
discharged
via the opening. This prevents
The
pressure
in thekeeps
water the
supply
networkopening
ensures
that
the
diaphragm
discharge
contamination
of the drinking
water.
that
the then
diaphragm
discharge
opening
closed;
the firstkeeps
checkthe
valve
is released
from
closed;
then theThe
firstwater
checkflows
valvetoisthe
released
the diaphragm.
secondfrom
the
diaphragm.
water flows
to the
second
check
valve via The
the middle
chamber
and
lifts it
check
from itsvalve
seat.via the middle chamber and lifts it
from its seat.
17
17
Monteringsforslag
Altech tilbakeslagssikring er ment for bruk i
overgangen mellom drikkevannsnettet, og for
Installation:
Test :
eksempel påfyllingen til et varme- / kjøleanlegg.
A.
Assemble
thethe
CA
9C
after theerwater
system
has been cleaned and rinsed.
Sørg
forleak-tightness
at vannet
for
partikler
og
Aim : To check
ofrent
thesupply
second
non-return
B. Install
theannet
CA 9C
horizontally.
Theleak-tight
CA 9C backflow
valve.
This
valve
must
remain
under
allprotection
types of device must be installed in such a manner that it can
som
kan påvirke
ventilens
funksjonalitet.
be counter-pressures.
easily accessed for inspection, for checking the proper functioning, and for maintenance purposes.
Partikler i vannet kan føre til lekkasje i ventilens
C. A shut off valve and/with draining device must be installed in front of the CA 9C.
dreneringssystem. Ventilen skal monteres
Execution
: 1.opening
Close the
shut
valve
D. The relief
must
beoff
connected
to a discharge pipe of Ø 40 mm via the enclosed funnel.
horisontalt,
og
ha
en
slik
plassering
i systemet
Open the draining
E. In case of2.installation
without adevice.
discharge pipe, the CA 9C should be installed
at a height of at least 30 cm above
2 med
1 Kuleventil
den letttokan
og vedlikeholdes.
If the
continues
drip,inspiseres
this indicates
leakage/contaminathewater
drain.at
uttapping
Ventilen
bør påmonteres
kuleventil
medbeen
tion
second
valve. In
this
test, it has
F. It of
is the
possible
thatnon-return
after
installation
and
commissioning
of the installation, the drain opening may leak some water,
assumed
downstream
is place.
present.
uttapping,
slikpressure
atsettled
den lett
kan demonteres
ogalso occur if due to insufficient flushing of the pipeline
until thethat
valve
seats have
in
Leakages may
network, kontrolleres.
contaminants are not properly removed.
The photographs, illustrations and descriptions contained in this brochure are given for information only.
Watts Industries reserves the right to change the technical specifications or the design of these products without prior notice.
Maintenance:
Når anlegget kjøres i gang kan ventilens
dreneringssystem
dryppe
litt vann.
Dette
vil and
gi therefore requires periodical inspection.
The backflow
preventer is a health
protection
safety
device
WATTS
INDUSTRIES
France at least once a year.
Watts Industries
recommends
backflow
protection device
should be inspected
seg når
ventilens that
seterthefårCAsatt
seg. Viderefør
avenue
Eiffel or
- B.P.
40339is revealed with a
The first indication
malfunction,
generally
caused by06,
foreign
debrisGustave
(sand, copper
calcium…),
alltid etof40
mm avløpsrør
fra ventilens
28006 CHARTRES Cedex (France)
permanent leak
from the drain.
dreneringsrør,
og videre mot sluk eller avløpstrakt.
In the case of leakage at the drain, it is recommended Tel.
to generate
a major
flow
circulation
by opening
taps
+33 (0)2
37 25
11of00
- Fax +33
(0)2 37some
25 11
11
for a few minutes: this is often sufficient to expel any foreign
debris
and
bring
everything
back
to
normal
situation.
E-mail [email protected]
This leak is merely an early warning and definitely doesSite
not www.wattsindustries.com
put the safety of the device at risk, but it requires remo-
Re-order no. 51(3)-UK-08/03
Strainer
ving and cleaning the device and the upstream strainer.
Vedlikehold
Test :
Aim : To check the leak-tightness of the second non-return
tilbakeslagssikring
er en sikkerhet
for of
valve.Altech
This valve
must remain leak-tight
under all types
opprettholdelse av rent drikkevann, og krever
counter-pressures.
også derfor periodisk ettersyn. Det anbefales
Static
state
Both check
valves are now closed. The discharge
Both
check
valves held
are now
closed. The discharge
opening
is always
closed.
opening is always held closed.
Tilbakeslag, undertrykk i drikkevannsnettet
Hvis trykket i drikkevannsnettet blir borte vil først tilbakeslagsventil
2 lukke, og deretter vil tilbakeslagsventil 1 lukke mot membranen.
Dette medfører at dreneringsåpningen åpner mot mellomtrykksonen
når overtrykket er stort nok.
Back-siphoning
Back-siphoning
When the pressure in the water supply network
When
thesecond
pressure
in the
water
supply
network
falls, the
check
valve
closes
against
the
falls,
check
valve
closes
against
seat. the
Thesecond
first check
valve
closes
against
thethe
seat.
The first
valveopening
closes against
thethe
diaphragm,
thecheck
discharge
opens to
diaphragm,
discharge
opening
opens to theis
intermediatethe
zone,
once enough
overpressure
intermediate
once
overpressure is
created. Thiszone,
creates
an enough
atmospheric
created.
This creates
atmospheric
"interference"
betweenanthe
water supply network
"interference"
betweenwater
the water
supply network
and the contaminated
downstream.
If the
and
thevalve
contaminated
water downstream.
check
is contaminated,
seepage is If the
check
valvevia
is contaminated,
seepage
is
discharged
the opening. This
prevents
discharged
via of
the
opening.
prevents
contamination
the
drinkingThis
water.
Ventilens posisjon
ved undertrykk
tilbakeslag
contamination
of the /drinking
water.
4
Altech tilbakeslagssikring
A1
B
2
at partikler/avleiring har samlet seg i ventilens
innmat.
ventilen
The photographs, illustrations and descriptions contained in this brochureTest
are av
given
for information only.
Hensikten
denne
testen
å sjekke
Watts Industries reserves the right to change the technical specifications or the design of these med
products
without
priorernotice.
om
Hvis ventilens plassering tilsier det kan
tilbakeslagsventil 2 fungerer, og er tett.
dette ofte utbedres ved å åpne ett eller flere
Steng kuleventilen (A), og åpne deretter kule­
nærliggende tappesteder noen få minutter,
ventilens France
dreneringsventil (B). Hvis vannet renner
WATTS INDUSTRIES
uavbrutt
når
er gjort
er det et tegn på
slik at man får gjennomspylt ventilen. Selv
06, avenue Gustave Eiffeldette
- B.P.
40339
lekkasje
gjennom
tilbakeslagsventil 2. Ventilen
om dette skulle løse problemet anbefales
det CHARTRES
28006
Cedex
(France)
må da demonteres, og rengjøres innvendig.
likevel å demontere ventilen og rengjøreTel. +33 (0)2 37 25 11 00 - Fax +33 (0)2 37 25 11 11
Denne testen forutsetter at det er mottrykk mot
ventilens innebygde filter og innvendigeE-mail [email protected]
tilbakeslagsventil 2.
komponenter.
Site www.wattsindustries.com
Re-order no. 51(3)-UK-08/03
Ventilens posisjon
vedstate
normal gjennomstrømning
Static
Execution : at
1. Close
theblir
shutinspisert
off valve og testet en gang per år.
ventilen
2.
Open
the
draining
En indikasjon på at device.
ventilen trenger ettersyn
If the water continues to drip, this indicates leakage/contaminaer at det oppstår en lekkasje fra ventilens
tion of the second non-return valve. In this test, it has been
dreneringssystem.
Detteis skyldes
assumed that
downstream pressure
present. mest sannsynlig
Altech tilbakeslagssikring
5
NON -CONTROLLABLE BACKFLOW PREVENTER CA TYPE
Technical specifications :
Nominal diameter : DN 15, DN 20.
Connections
: FF 1/2”,
MM 1/2”, FF 3/4”,
Approvals
:
MM 3/4”, F1/2”/M1”.
provals :
Working
PN10.
NF pressure
P 43 009 :(pr
EN 14367), ACS, KIWA, WRAS,
Tekniske spesifikasjoner
Min. pressure : 1 bar.
Max. temperature : 65°C.
Connection tundish : Ø 40.
MediumBELGAQUA.
: clear water.
SVGW,
SORTIMENTSOVERSIKT
Altech tilbakeslagssikring
P 43 009 (pr EN 14367), ACS, KIWA, WRAS, SVGW, BELGAQUA.
Materials:
• Nominell
diameter
DN15 og DN20
Technical
specifications
:
description
materials Beskrivelse
Materiale
chnical•specifications
:
Innvendige
gjenger
1/2”
og
3
/4”
Body
CuZn35Pb2Al-B (CB752S)
Min. pressureAvsinkningsfri
: 1 bar. messing
Nominal diameter
: DN 15, DN 20.
Ventilkropp
• Maksimalt
arbeidstrykk
Valve
piston and
Inlet fitting 10bar
CuZn36Pb2As
(CW602N)
Min. pressure : 1 bar.
minal diameter
: DN 15, DN
20.1/2”, MM 1/2”, FF 3/4”,
Max.
temperature
: 65°C.
Connections
: FF
Kjegle
Avsinkningsfri messing
Sockets
andMM
fittings
CuZn39Pb3
(CW614N)
1bar
: 65°C.
nnections•: Minste
FF 1/2”, arbeidstrykk
1/2”,
FF3/4”,
3/4”,
tundish : Ø 40.
MM
F1/2”/M1”. Max. temperature Connection
Anslutninger
Avsinkningsfri messing
Nuts
CuZn39Pb3
(CW614N)
• Maksimal
medietemperatur
65°C Connection
tundish
: Ø 40.: clear
MM
3/4”, F1/2”/M1”.
Medium
water.
Working
pressure
: PN10.
Spring
Stainless
steel
1.4310
Fjær
Rustfritt stål
Medium : clear water.
rking pressure
: PN10. på dreneringsstuss 40 mm
• Dimensjon
Membrane
NBR (Nitrile)
Membran
NBR
• Bruksområder
(medie): Drikkevann, NBR (Nitrile)
ValveMaterials:
gasket and check-valve gasket
Pakninger
NBR
terials:
varme- og kjøleanlegg
Check-valve
POM (PolyAcetal, "Hostaform")
description
materials
Tilbakeslagsventil
Polyacetal
scription
materials
Body
CuZn35Pb2Al-B (CB752S)
dy
Valve piston and Inlet fittingCuZn35Pb2Al-B (CB752S)
CuZn36Pb2As (CW602N)
lve piston and Inlet fitting
CuZn36Pb2As (CW602N)
Sockets and fittings
CuZn39Pb3 (CW614N)
& range:
ckets Dimensions
and fittings
CuZn39Pb3 (CW614N)
Nuts
CuZn39Pb3 (CW614N)
ts
CuZn39Pb3 (CW614N)
Spring
Stainless steel 1.4310
ring
Stainless steel 1.4310
Membrane
NBR (Nitrile)
embrane
NBR (Nitrile)
Valve
gasket
and
check-valve
gasket
NBR
(Nitrile)
lve gasket and check-valve gasket
NBR (Nitrile)
Check-valve
POM
(PolyAcetal, "Hostaform")
eck-valve
POM (PolyAcetal, "Hostaform")
NRF nr. 5551481
Dimensjon
1/2 ”
Varebeskrivelse
Altech tilbakeslagssikring
5551482
3 /4”
Altech tilbakeslagssikring
Spesifikasjon
CuZn35Pb2AI-B (CB752S)
CuZn36Pb2As (CW602N)
CuZn39Pb3 (CW614N)
1.4310
Dimensjoner og mål
Dimensions
& range:
mensions &
range:
F/F 1/2” (15x21)
ref. code : 30115
M/M 1/2” (15x21)
ref. code : 30125
F/F 3/4” (20x27)
ref. code : 30215
M/M 3/4” (20x27)
ref. code : 30225
F 1/2” (15x21)/M 1” (26x34)
ref. code : 30138
diameter
type
finish
ref. code
F/F 1/2” (15x21)
backflow preventer CA9C + air gap
self colour brass
30115
M/M 1/2” (15x21)
backflow preventer CA9C + air gap
self colour brass
30125
F/F
3/4”
(20x27)
backflow
preventer
CA9C
+
air
gap
self
colour
brass
30215
M/M
3/4” (20x27) M/M
F 1/2”
(15x21)/M
1” F
(26x34)
/F 1/2” (15x21)F/F 1/2”
M/M
1/2” (15x21)M/M 1/2”F/F
3/4” (20x27) F/F 3/4”
3/4”
(20x27)
1/2”
(15x21)/M
(15x21)
(15x21)
(20x27)
3/4” (20x27)
backflow
CA9Cref.
+ air
gap
self ref.
colour
brass
302251” (26x34)
code
: 30225 ref.
code
: 30138 ref. code
f. codeM/M
: 30115
ref.: 30115
code : 30125ref. code
ref.: 30125
codepreventer
: 30215 ref.
code
:
30225
: 30138
ref.
code
code
:
30215
3 /4”
F Tilbakeslagssikring
1/2” (15x21) / M1/2”
1” (26x34) Tilbakeslagssikring
backflow preventer
CA9C + air gap
self colour brass
30138
ameter
type
diameter
type
F 1/2” (15x21)
backflow preventer CA9C + air gap
F/F
1/2”
(15x21)
backflow
preventer
Trykktapsdiagram
M 1/2” (15x21)
CA9C + air gap
Flow
rate
: (15x21)backflow preventer
M/M
1/2”
backflow
preventer
F 3/4” (20x27)
backflow preventer CA9C + air gap
F/F 3/4” (20x27)backflow preventer
backflow
M 3/4” (20x27)
CA9C +preventer
air gap
M/M
3/4”
(20x27)
backflow
1/2” (15x21) / M 1” (26x34)
backflow preventer CA9C +preventer
air gap
F 1/2” (15x21) / M 1” (26x34)
backflow preventer
Flow rate :
finish
self colour brass
CA9C self
+ aircolour
gap brass
CA9C self
+ aircolour
gap brass
CA9C self
+ aircolour
gap brass
CA9C self
+ aircolour
gap brass
CA9C + air gap
ref. code
finish
30115
self colour30125
brass
self colour30215
brass
self colour30225
brass
self colour30138
brass
self colour brass
ref. code
30115
30125
30215
30225
30138
Flow rate :
Vannmengde m 3/h
Flow m3/h
6
Altech tilbakeslagssikring
Altech tilbakeslagssikring
7
MER ENN 50 SERVICESENTRE
Avdeling
Besøksadresse
TelefonFax
Alta
Arendal
Asker
Bergen - Godvik Bergen - Kanalveien Bergen - Nyborg
Bjørndal
Bodø Bærum
Drammen
Flekkefjord
Fredrikstad
Førde
Gjøvik
Gol
Hamar Hammerfest
Harstad
Haugesund Jessheim
Kongsvinger
Kristiansand Kristiansund
Langhus
Lillehammer
Mo i Rana
Molde
Mosjøen
Moss Namsos
Narvik
Nordfjordeid
Oslo - Bryn Oslo/Hovedkontor
Larvik - Ringdalskogen Sandefjord
Sandnes
Sandnessjøen
Ski
Skien Skøyen Sogndal
Stavanger - Hillevåg
Steinkjer
Stjørdal
Stord Strømmen
Svolvær
Torshov
Tromsø Trondheim - Heimdal
Trondheim - Lade Tønsberg
Verdal
Ålesund - Color Line Stadion
Ålesund - Fremmerholen Maskinsvingen 3, 9511 Alta
Moland Park, 4846 Arendal
Nye Vakåsvei 8, 1395 Hvalstad
Leirvikåsen 51, 5179 Godvik
Kanalveien 46, 5068 Bergen
Langarinden 8, 5132 Nyborg
Bjørnerudveien 13, 1266 Oslo
Haakon VIIs gt. 108, 8008 Bodø
Olav Ingstads vei 3, 1351 Rud
Nedre Eiker vei 61, 3048 Drammen
Drangeid 60, 4400 Flekkefjord
Tomteveien 31 A, 1618 Fredrikstad
Flovegen 3, 6800 Førde
Kallerudlia 10, 2816 Gjøvik
Elveveien 6, 3550 Gol
Vangsvegen 201, 2321 Hamar
Kransvikveien 5, 9600 Hammerfest
Margrethe Jørgensens vei 1E
Kvalamarka 23, 5514 Haugesund
Industriveien 12, 2050 Jessheim
Lerkeveien 40, 2209 Kongsvinger
Stemmane 12 A, 4636 Kristiansand
Industriveien 4, 6517 Kristiansund
Regnbuen Næringsområde, Snipetjernv. 8,1405 Langhus
Oskar Skoglys vei 2, 2619 Lillehammer
Søndre gate 2, 8624 Mo i Rana
Birger Hatlebakks veg 28, 6415 Molde
Havnegt. 35, 8663 Mosjøen
Årvollskogen 31, 1529 Moss
Hestmarka, 7800
Skarvenesveien 12, 8514 Narvik
Kaiveien 11, 6770 Nordfjordeid
Brynsengveien 5, 0667 Oslo
Brynsengveien 5, 0667 Oslo
Ringdalveien 20, 3270 Larvik
Peder Bogensgt. 4, 3238 Sandefjord
Årsvollveien 18, 4312 Sandnes
Novikveien 111, 8800 Sandnessjøen
Haugenveien 5, 1400 Ski
Nybergflata 5, 3737 Skien
Drammensveien 130
Kloppavegen 5, 6854 Kaupanger
Hillevågsveien 99, 4016 Stavanger
Bomvegen 4, 7725 Steinkjer
Ligaardvegen 4, 7500 Stjørdal
Svartadalen 31, 5412 Stord Stasjonsveien 1, 2010 Strømmen
Arkaden, Torget 9, 8300 Svolvær
Chr. Michelsensgt. 65, 0474 Oslo
Stakkevollveien 319, 9019 Tromsø
Heggstadmoen 47, 7080 Heimdal
Stiklestadveien 3, 7041 Trondheim
Fjordgt. 5, 3125 Tønsberg
Akerveien 1, 7650 Verdal
Sjømannsveien 14, 6008 Ålesund
Rødsetvegen 25, Fremmerholen, 6011 Ålesund 78456980
37058640
66776240
55506500
55506500
55608100
21022450
75506110
67171910
32265200
38324400
69363000
57829940
61131770
32073610
62543400
78421730
77001460
52708720
63983880
62823640
38149100
71572780
23194581
61246630
75126300
71202250
75176700
69363000
74226767
75801950
57862825
22725500
22725500
33133100
33483388
51822300
75046680
64878051
35504450
22132860
57679080
51201430
74134088
74901500
53001650 64845140
99234231
23234720
77664900
72593200
73994350
33301250
74602800
70104280
70175250
78437532
37023770
66859400
55931390
55290670
55182705
22625658
75520177
67132900
32836400
38322079
69945100
57821268
61185900
32077110
62523425
78426100
77070800
52712900
63971204
62815889
38096664
71685930
64867386
61263572
75169345
71213173
75172216
69234450
74274155
76954323
57862830
80041616
22658765
33193760
33469682
51624310
75046780
64873088
35546358
22732400
57672111
51585867
74161288
74824955
53417242
63817970
76072434
22719600
77680700
72590032
73533800
33310563
74072487
70127344
70147753
Med forbehold om trykkfeil og endringer i produktspesifikasjoner.
www.dahl.no
Tlf: 22 72 55 00
e-post: [email protected]
Brosjyren bestilles på NRF nr. 9999986