1. No category

8 Points to consider when paving a patio!
When planning to re-do the entrance of your house or building a new pathway
to give a rustic look to your surroundings, layering stones can be a viable option
to get a durable walkway or a patio.
Choose the option that suits you
Whether concrete or brick, whatever you choose, both options are versatile,
durable, long lasting and can be customized to suit your taste. These days,
paving stones at California Pavement Maintenance has become easier than
imagined. Though it requires planning and patience and bit of hard work, it still
can be done as dramatic or as simple as you want it to be. If you are planning a
perfect and professional look, you must go with the services of Commercial
Paving Contractors. Paving materials consist of concrete, asphalt, stone like
flagstone, artificial stone, cobblestone, tiles, and bricks and wood.
Points to consider
• Make a Plan - Planning is the foremost thing you need to focus on before
you start any work. Make a drawing of how you want your pavement to look
like. Keep in mind the slope and direction. You can set your plan professionally
with the expert advice of Asphalt Paving Contractors.
• Check with Local Authorities – in case you are planning to pave stones
outside of the house, it is wiser to check with local authorities to not to obtrude
any cables or pipes in front of your house.
• Material – Keep the overall look of your house in mind while making your
choices. Find a local store to pick your material. Measure the area and go 5-10%
extra depending on the curves of the area. You might need to cut some stones to
adjust to the area.
• Scope the Slope – To avoid water pooling on the pavement, start with the
highest point that is closest to the door or the house and move downward or
forward.
• Digging – Consult a manufacturer or local supply store for Asphalt Paving
Near Me from where you picked your material to get an idea of the base depth.
The sum of the depth of the base, the sand, and the pavers will be how deep you
need to excavate your project area.
• Base Material – crushed stones is used to lay the base which remains strong
when compacted and also helps in draining. Lay 6 inches at a time and tamper it
to keep it compact. Repeat the process till you finish the required height.
Measure to ensure the correct height.
• Edges – Put edges to secure the pavement. Plastic is most commonly used.
But aluminum or steel are also good options. And finally put the layer of sand
before installing the pavers.
• Pavers – Start layering the stones one by one but do not walk on the layered
stone to move ahead. Cut the sides wherever required to adjust to the edges.
Tamp the pavers with a plate compactor once done. Use a paver sealer to secure
the pavers.
Last but not the least, the California Paving Construction put fine dry sand
between the stones to secure and lock the cracks between the pavers tightly.