1. business and industrial
2. energy
3. oil

In every emotion
there is something wonderful
to preserve
General Gas
Automotive Catalogue
In every emotion
there is something wonderful
to preserve
GeneralGas
Index
4SolsticeTM HFO 1234yf
6
Kryon 134a
8
MAXI Cylinders
9
MINI Cylinders
10 Non-refillable Cylinders
11 Lubricants
12 Chemical Products
13 Medical-Surgical Devices
17 Kryon Leak Detector
20 Dye Equipment
23 Kryon Solvents
24Glycols
SolsticeTM HFO 1234yf
Sealable
only in Europe
The ideal Low Global Warming Potential refrigerant for motor vehicle air conditioning
SolsticeTM HFO 1234yf has been developed at Buffalo Research Laboratory by Honeywell
Fluorochemicals with the aim of replacing R134a in motor vehicle air conditioning.
Its thermodynamic characteristics make HFO 1234yf very similar to R134a in performance, energetic efficiency and working pressures.
By using HFO 1234yf automobile manufacturers have been able to adapt easily systems
working with R 134a, and achieve similar performance, sometimes even better.
Even compared to carbon dioxide - CO2, HFO 1234yf boasts a better energetic efficiency
and a lower contribution to the total greenhouse effect (Direct Effect – Indirect Effect).
Its limited Direct Greenhouse Effect ( GWP
= 4 Kg/CO2 ) makes HFO 1234yf the best
possible solution from an environmental
point of view.
With its energetic efficiency, HFO 1234yf
is the best solution for motor vehicle air
conditioning.
UM
HFO
1234yf
gr/grmole
114,04
Saturated Vapour Temperature @ 1,013 bar
°C
-29,19
Temperature Glide @ 1,013 bar
°C
0,00
Physical Properties
Environmental Classification
HFO
Molecular Weight
1.091,90
Density of Saturated Vapour @ 1,013 bar
kg/m
6,05
bar_rel
bar_rel
5,81
12,01
Critical Temperature
Critical Pressure
Critical Density
°C
bar_rel
kg/m3
94,70
32,81
475,55
kJ/Kg
180,09
kJ/Kg*°C
kJ/Kg*°C
0,26
0,74
Heat of Evaporation @ 1,013 bar
Specific Entropy of Liquid @ 25°C
Specific Entropy of Vapour @ 25°C
CP/CV Ratio @ 25°C - 1,013 bar_ass
(R11 = 1)
OEL/PEL
ppm(v/v)
500
RCL/IDLH
ppm(v/v)
16.000
Atmosferic Life Time
Years
0,03
<1
Lower Flammability Limit
%
6,50
AIT
°C
405,00
ASHRAE Standard 34 Safety Rating
A2L
Packaging
Packaging
Item Code
Container Capacity
Lt
Kg
Pressure
Cylinder
F-GF-HFOSOLTM-5K
6
5
36 bar
Cylinder
F-GF-HFOSOLTM-10K
13,6
10
36 bar
4
GeneralGas
Price
€
^^ Cooling power similar to R134a.
^^ Energetic efficiency similar to
R 134a.
^^ Working pressures similar to
R 134a.
^^ Mild flammability (ASHRAE
classification = A2L).
HFO 1234yf is compatible with POE
oils and PAG oils.
0
(CO2 = 1)
GWP
Performance
Recommended
Lubricants
1,13
ODP
Retrofitting R134a to HFO 1234yf,
is not possible, since HFO 1234yf is
slightly flammable.
^^ Low pressure refrigerant.
kg/m3
Pressure of Saturation (Saturated Liquid) @ 25°C
Pressure of Saturation (Saturated Liquid) @ 50°C
HFO 1234yf is used in air conditioner
of new car models.
^^ Low Global Warming Potential:
LGWP= 4 kg CO2.
Density of Liquid @ 25°C
3
Applications
UM
NR
NR
Thermodynamic Properties of HFO 1234yf
Temperature
Vapour Pressure
°C
bar_rel
-50
-48
-46
-44
-42
-40
-38
-36
-34
-32
-30
-28
-26
-24
-22
-20
-18
-16
-14
-12
-10
-8
-6
-4
-2
0
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
-0,64
-0,60
-0,55
-0,50
-0,45
-0,39
-0,33
-0,26
-0,19
-0,11
-0,02
0,07
0,16
0,27
0,38
0,50
0,62
0,75
0,90
1,05
1,20
1,37
1,55
1,74
1,94
2,15
2,36
2,60
2,84
3,09
3,36
3,64
3,94
4,25
4,57
4,90
5,26
5,62
6,01
6,41
6,82
7,26
7,71
8,18
8,66
9,17
9,70
10,24
10,81
11,40
12,01
12,64
13,30
13,98
14,68
15,41
16,16
16,94
17,74
18,57
19,43
Density
Enthalpy
Entropy
Saturated Liquid Saturated Vapour Saturated Liquid Saturated Vapour Saturated Liquid Saturated Vapour
kg/m3
1.318,40
1.313,20
1.307,90
1.302,60
1.297,20
1.291,90
1.286,50
1.281,00
1.275,60
1.270,10
1.264,50
1.259,00
1.253,40
1.247,70
1.242,00
1.236,30
1.230,50
1.224,70
1.218,80
1.212,90
1.207,00
1.200,90
1.194,90
1.188,70
1.182,50
1.176,30
1.170,00
1.163,60
1.157,20
1.150,60
1.144,00
1.137,40
1.130,60
1.123,80
1.116,90
1.109,90
1.102,80
1.095,50
1.088,20
1.080,80
1.073,30
1.065,70
1.057,90
1.050,00
1.042,00
1.033,80
1.025,50
1.017,00
1.008,30
999,44
990,38
981,10
971,59
961,80
951,73
941,34
930,60
919,46
907,89
895,83
883,23
kg/m3
2,35
2,60
2,87
3,15
3,46
3,79
4,15
4,54
4,95
5,39
5,86
6,36
6,89
7,46
8,07
8,71
9,39
10,12
10,89
11,70
12,56
13,47
14,43
15,45
16,52
17,65
18,84
20,09
21,41
22,80
24,27
25,81
27,43
29,13
30,92
32,80
34,77
36,85
39,03
41,32
43,73
46,26
48,92
51,72
54,66
57,75
61,01
64,66
68,05
71,86
75,88
80,13
84,62
89,37
94,41
99,75
105,44
111,50
117,96
124,89
132,33
KJ/kg
KJ/kg
KJ/kg*K
KJ/kg*K
-23,79
-21,53
-19,25
-16,97
-14,67
-12,36
-10,03
-7,70
-5,35
-2,99
-0,61
1,77
4,17
6,58
9,01
11,45
13,90
16,36
18,84
21,33
23,84
26,36
28,89
31,44
34,00
36,58
39,17
41,77
44,39
47,03
49,68
52,35
55,03
57,73
60,44
63,17
65,92
68,69
71,47
74,27
77,09
79,93
81,79
85,66
88,56
91,48
94,42
97,38
100,37
103,39
106,43
109,50
112,60
115,73
118,90
122,10
125,35
128,63
131,97
135,36
138,80
166,43
167,77
169,11
170,46
171,81
173,15
174,50
175,85
177,20
178,55
179,90
181,25
182,59
183,94
185,28
186,63
187,97
189,30
190,64
191,97
193,30
194,62
195,94
197,25
198,56
199,87
201,16
202,45
203,74
205,01
206,28
207,54
208,79
210,02
211,25
212,47
213,67
214,85
216,03
217,19
218,33
219,45
220,56
221,64
222,70
223,75
224,76
225,75
226,72
227,65
228,56
229,43
230,26
231,05
231,80
232,51
233,16
233,76
234,29
234,76
235,15
-0,102
-0,092
-0,082
-0,072
-0,062
-,0052
-0,042
-0,032
-0,022
-0,012
-0,003
0,007
0,017
0,027
0,036
0,046
0,056
0,065
0,075
0,084
0,094
0,103
0,113
0,122
0,132
0,141
0,150
0,160
0,169
0,178
0,188
0,197
0,206
0,215
0,225
0,234
0,243
0,252
0,262
0,271
0,280
0,289
0,298
0,307
0,317
0,326
0,335
0,344
0,354
0,363
0,372
0,381
0,391
0,400
0,409
0,419
0,428
0,438
0,447
0,457
0,467
0,751
0,749
0,748
0,746
0,745
0,744
0,743
0,742
0,741
0,741
0,740
0,739
0,739
0,738
0,738
0,738
0,738
0,738
0,738
0,738
0,738
0,738
0,738
0,738
0,739
0,739
0,739
0,740
0,740
0,740
0,741
0,741
0,742
0,742
0,743
0,743
0,744
0,744
0,745
0,745
0,746
0,747
0,747
0,748
0,748
0,748
0,749
0,749
0,750
0,750
0,750
0,750
0,750
0,750
0,750
0,750
0,750
0,750
0,749
0,749
0,748
www.generalgas.it
5
Kryon 134a
The reference refrigerant for motor vehicle air conditioning
Kryon 134a is one of the main product replacing HCFC gases and is the non-ozone depleting
and non polluting option. The product has an energetic efficiency and a refrigeration capacity
similar to R12, but with a lower toxicity.
Kryon 134a is a reference refrigerant for motor vehicle air conditioning. It can be used in home
and commercial refrigeration as well as in commercial and industrial air conditioning.
Kryon 134a is one of the most common components in refrigerants on the market.
Applications
Kryon 134a is used in all motor vehicle
air conditioning systems.
Kryon 134a has been developed for
many applications in refrigeration, as for
example supermarket display cabinets,
cold rooms and domestic refrigerators.
The product can be used in packaged
centrifugal chillers.
Physical Properties
UM
Kryon 134a
Environmental Classification
^^ Characteristics similar to R 12.
HFC
Molecular Weight
Saturated Vapour Temperature @ 1,013 bar
Temperature Glide @ 1,013 bar
gr/grmole
102,03
°C
-25,79
^^ Slight capacity loss in low
temperature applications.
°C
0,00
Density of Liquid @ 25°C
kg/m3
1.206,70
Density of Saturated Vapour @ 1,013 bar
kg/m3
5,27
Pressure of Saturation (Saturated Liquid) @ 25°C
Pressure of Saturation (Saturated Liquid) @ 50°C
bar_rel
bar_rel
5,64
12,17
Critical Temperature
Critical Pressure
Critical Density
°C
bar_rel
kg/m3
101,06
39,58
511,90
Heat of Evaporation @ 1,013 bar
kJ/Kg
216,92
kJ/Kg*°C
kJ/Kg*°C
1,12
1,72
ODP
(R11 = 1)
0,00
OEL/PEL
ppm(v/v)
1.000
RCL/IDLH
ppm(v/v)
50.000
Years
14,00
(CO2 = 1)
1.430
Lower Flammability Limit
%
Non Flammable
AIT
°C
743
Specific Entropy of Liquid @ 25°C
Specific Entropy of Vapour @ 25°C
CP/CV Ratio @ 25°C - 1,013 bar_ass
Recommended
Lubricants
Kryon 134a requires the use of
polyalkylene glycol (PAG) based
lubricants and polyol ester (POE) based
lubricants.
1,13
Atmosferic Life Time
GWP
ASHRAE Standard 34 Safety Rating
A1
Packaging
Packaging
Item Code
Container Capacity
Lt
Kg
Pressure
Price
UM
Roll Drum
F-GF-R134A-FU
920
957
36÷48 bar
KG
Cylinder
F-GF-R134A-40
40
40
36÷48 bar
KG
Cylinder
F-GF-R134A-13
13
13
36÷48 bar
Cylinder
F-GF-R134A-12
12
12
36÷48 bar
6
GeneralGas
€
Performance
KG
KG
Thermodynamic Properties of R 134a
Temperature
Vapour Pressure
°C
bar_rel
-50
-48
-46
-44
-42
-40
-38
-36
-34
-32
-30
-28
-26
-24
-22
-20
-18
-16
-14
-12
-10
-8
-6
-4
-2
0
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
-0,72
-0,68
-0,64
-0,60
-0,55
-0,50
-0,45
-0,38
-0,32
-0,25
-0,17
-0,09
0,00
0,10
0,20
0,31
0,43
0,56
0,69
0,84
0,99
1,16
1,33
1,51
1,71
1,91
2,13
2,36
2,61
2,86
3,13
3,42
3,72
4,03
4,36
4,70
5,07
5,44
5,84
6,26
6,69
7,14
7,61
8,11
8,62
9,15
9,71
10,29
10,89
11,52
12,17
12,84
13,54
14,27
15,02
15,81
16,62
17,45
18,32
19,22
20,16
Density
Enthalpy
Entropy
Saturated Liquid Saturated Vapour Saturated Liquid Saturated Vapour Saturated Liquid Saturated Vapour
kg/m3
kg/m3
KJ/kg
KJ/kg
KJ/kg*K
KJ/kg*K
1.446,30
1.440,60
1.434,90
1.429,20
1.423,50
1.417,70
1.411,90
1.406,10
1.400,20
1.394,30
1.388,40
1.382,40
1.376,50
1.370,40
1.364,40
1.358,30
1.352,10
1.345,90
1.339,70
1.333,40
1.327,10
1.320,80
1.314,30
1.307,90
1.301,40
1.294,80
1.288,10
1.281,40
1.274,70
1.267,90
1.261,00
1.254,00
1.246,90
1.239,80
1.232,60
1.225,30
1.218,00
1.210,50
1.202,90
1.195,20
1.187,50
1.179,60
1.171,60
1.163,40
1.155,10
1.146,70
1.138,20
1.129,50
1.120,60
1.111,50
1.102,30
1.092,90
1.083,20
1.073,40
1.063,20
1.052,90
1.042,20
1.031,20
1.020,00
1.008,30
996,25
1,65
1,84
2,04
2,27
2,51
2,77
3,05
3,36
3,69
4,04
4,43
4,84
5,27
5,75
6,25
6,78
7,36
7,97
8,62
9,31
10,04
10,82
11,65
12,52
13,45
14,43
15,47
16,56
17,72
18,94
20,23
21,58
23,02
24,52
26,11
27,78
29,54
31,39
33,34
35,38
37,54
39,80
42,18
44,68
47,32
50,09
53,00
56,06
59,29
62,69
66,27
70,05
74,03
78,24
82,68
87,38
92,36
97,64
103,24
109,21
115,57
135,67
138,15
140,64
143,14
145,64
148,14
150,66
153,18
155,71
158,25
160,79
163,34
165,90
168,47
171,05
173,64
176,23
178,83
181,44
184,07
186,70
189,34
191,99
194,65
197,32
200,00
202,69
205,40
208,11
210,84
213,58
216,33
219,09
221,87
224,66
227,47
230,29
233,12
235,97
238,84
241,72
244,62
247,54
250,48
253,43
256,41
259,41
262,43
265,47
268,53
271,62
274,74
277,89
281,06
284,27
287,50
290,78
294,09
297,44
300,84
304,28
367,65
368,92
370,19
371,46
372,73
374,00
375,27
376,54
377,80
379,06
380,32
381,57
382,82
384,07
385,32
386,55
387,79
389,02
390,24
391,46
392,66
393,87
395,06
396,25
397,43
398,60
399,77
400,92
402,06
403,20
404,32
405,43
406,53
407,61
408,69
409,75
410,79
411,82
412,84
413,84
414,82
415,78
416,72
417,65
418,55
419,43
420,28
421,11
421,92
422,69
423,44
424,15
424,83
425,47
426,07
426,63
427,14
427,61
428,02
428,36
428,65
0,741
0,752
0,763
0,774
0,785
0,796
0,806
0,817
0,828
0,838
0,849
0,859
0,869
0,880
0,890
0,900
0,910
0,921
0,931
0,941
0,951
0,961
0,971
0,980
0,990
1,000
1,010
1,020
1,029
1,039
1,049
1,058
1,068
1,077
1,087
1,096
1,106
1,115
1,125
1,134
1,144
1,153
1,162
1,172
1,181
1,191
1,200
1,209
1,219
1,228
1,238
1,247
1,256
1,266
1,275
1,285
1,294
1,304
1,314
1,323
1,333
1,781
1,777
1,774
1,770
1,767
1,764
1,762
1,759
1,756
1,754
1,752
1,749
1,747
1,745
1,743
1,741
1,740
1,738
1,736
1,735
1,733
1,732
1,731
1,729
1,728
1,727
1,726
1,725
1,724
1,723
1,722
1,721
1,720
1,720
1,719
1,718
1,717
1,717
1,716
1,715
1,715
1,714
1,713
1,712
1,712
1,711
1,710
1,710
1,709
1,708
1,707
1,706
1,706
1,705
1,704
1,702
1,701
1,700
1,699
1,697
1,696
www.generalgas.it
7
MAXI Cylinders
Rechargeable Cylinders: an eco-friendly and “low cost” solution
MAXI Cylinders are helpful every time a limited quantity of refrigerant charge is needed. These
cylinders are light and easy to handle compared to the traditional ones. Therefore their transportation is easier. Our MAXI Cylinders are available in 13,6 Litres size. They are manufactured
in compliance with T-PED ( Transportable Pressure Equipment Directive ) and are packed in
high-strength cardboard boxes in order to make the transport and the storage easier.
MAXI Cylinders are provided with a special quick coupler automatic valve that prevents leaks
that usually occur with plug valves.
General Gas has always been sensitive to environmental issues. With the “F-Gas-Friend”, General Gas has implemented the F-Gas Directive by buying back the rechargeable MAXI Cylinders, so that the cylinders are not disposed of in the environment. So cylinders are regenerated
and filled again.
Applications
MAXI Cylinders are used every time
a limited refrigerant charge is needed.
They are widely used in workshops and
spare parts dealers.
MAXI Cylinders are packed in highstrength cardboard boxes provided with
a special hole that allows you to connect
the hose to the cylinder, without having
to remove the cylinder from its box. Even
in upside down position, it is possible to
mount the hose in such a way that it is
easy to open the valve when taking the
liquid gas phase.
Performance
^^ MAXI Cylinders are light but
they are also strong thanks to
the protection of high-strength
cardboard.
^^ MAXI Cylinders are provided with
a quick coupler automatic valve that
prevents leaks that usually occur
with plug valves.
^^ MAXI Cylinders are rechargeable:
they can be regenerated and filled
again. In that case a yellow label
(F-Gas Friend) will be stick on the
cylinder.
Packaging
Packaging
Kryon 134a
8
Item Code
Container Capacity
Pressure
Lt
Kg
F-GF-MX-R134A-12K
13,6
12
42÷48 bar
F-GF-MX-R134A-13,6
13,6
13,6
42÷48 bar
GeneralGas
Price
€
UM
NR
NR
MINI Cylinders
Cylinders with a small amount of refrigerant charge
In the field of automotive, the use of cylinders with a small capacity is very useful when refilling
connecting pipes or conditioners. The advantage consists in marketing a cylinder that has a low
market value, and therefore it is easier to sell it. Our MINI Cylinders are available 1 Litre size
( pack of12) and in 2,5 Litre size (pack of 6). MINI Cylinders are made of low carbon steel
with a maximum working pressure equal to 48 bar.
MINI Cylinders are filled by General Gas with the use of a patented system called “High Purity
System”. With this method it is possible to achieve a quality standard as required by the major
air conditioning and refrigerating system manufacturers. This technology allows you to obtain a
gas humidity below the maximum limit (equal to 10 ppm).
Therefore this type of cylinder (containing 800 gr. – 2 Kg) is the most suitable one to meet the
needs of thermohydraulic market.
Applications
MINI Cylinders are used every time
a small quantity of refrigerant is
needed. They are mostly used in the
field of thermodynamics.
Performance
^^ MINI Cylinders are manufactured
in low-carbon steel and have a
maximum working pressure equal
to 48 bar.
^^ A “Low Cost” and “Eco-Friendly”
Solution.
^^ Patented filling system “High Purity
System”.
^^ They reduce market prices.
Packaging
Description
Item Code
Kryon 134a - Pck. 12 Cylinders
F-GF-MI-R134A-1LT
Kryon 134a - Pck. 6 Cylinders
F-GF-MI-R134A-2,5LT
Container Capacity
Pressure
Valve
0,900
48 bar
17E - Usc.1/4” SAE + VDS
2,000
48 bar
17E - Usc.1/4” SAE + VDS
Lt
Kg
1
2,5
Price
€
www.generalgas.it
UM
Pck
Pck
9
Non-refillable Cylinders
General Gas Non-Refillable Cylinders are used world-wide. They are manufactured according
to DOT 39 specifications. Each cylinder is packed in high-strength cardboard box in order to make
the transport and the storage easier. Non-Refillable Cylinders are filled by General Gas with the
use of a patented system called “High Purity System”. With this method it is possible to achieve a
quality standard as required by the major air conditioning and refrigerating system manufacturers.
This technology allows you to obtain a gas humidity below the maximum limit (equal to 10 ppm).
Non-Refillable Cylinders
Cylinder
Diameter
Cylinder Hight (Handle included)
Cylinder
Capacity
Gas Net Weight
Box Dimension
UM
Kryon 134a
mm
Inc
mm
inc
lt
gal
kg
lb
mm
243
9.56
425
17.71
13,77
3.63
13,6
3.1
247x247x(h)430
-
DOT39
Standard Specification
NRV Valve Connection
-
1/4 SAE
Working Pressure/
Test Pressure/
psi
bar
Mpa
260/325
18/22
1.8/2.2
Cylinder N°/Pallet
pcs
45
Cylinder N°/Container*
pcs
900
Applications
^^ Patented, non-refillable valve
preserves product integrity and
discourages unauthorized attempts
to refill the cylinder.
^^ Heavy duty wire handle provides
maximum protection for the valve
during transportation and handling,
as well as a comfortable means of
carrying the cylinder.
^^ Relief device is a frangible disc
designed to vent the contents if the
cylinder is over-pressurized.
* Container 20’
Packaging
Packaging
Kryon 134a
10
Item Code
F-GF-MX-DOT-R134A
GeneralGas
Container Capacity
Lt
Kg
13,77
13,6
Pressure
22 bar
Price
€
UM
NR
Lubricants
Emkarate Poe Oils
Emkarate RL 2000 is an ISO 68 synthetic polyol ester (POE) lubricant formulated specifically
for use in refrigeration and air-conditioning compressors using HFC refrigerants. This product
provides effective wear protection for steel and aluminium surfaces for increased system life
and improved efficiency and is suitable for both initial fill and service fill. The combination of low
temperature characteristics and unparalleled chemical and thermal stability enable the use of
Emkarate RL 2000 over a wide operating temperature range.
Emkarate Oil RL 2000
Analysis
UM
Method
Value
Viscosity @ 40°C
cSt
ASTM D445
62.0
Viscosity @ 100°C
cSt
ASTM D445
8.35
-
ASTM D2270
108
Viscosity Index
Performance
Pour Point
°C
ASTM D97
-45
Flash Point COC
°C
ASTM D92
250
mg KOH/g
ASTM D974
< 0.05
g/ml
ASTM D1298
0.965
Acid Value
Density @ 20°C
Packaging
Container
Can
Item Code
F-OL-EM-2000H-1LT
Container capacity
Price
Lt
1
€
UM
27,53
LT
^^ Characteristics of purity of the Poe
base and high performance of
additives developed by Emkarate
make these oils the best product
of lubrication for the use with HFC
refrigerants.
^^ Emkarate Poe Oils are
approved by the major compressor
manufacturers such as Bitzer,
Copeland, Frascold, Dorin and Boch.
www.generalgas.it
11
Chemical Products
Air conditioning system and refrigerating system maintenance implies the
solution of a series of problems requiring the use of chemical products.
These products have been developed in such a way so as to solve any
problem and to guarantee success of treatments needed.
Principal problems are:
^^ Cleaning and disinfection of evaporators
^^ Cleaning of Condenser
^^ Treatment of heat transfer surface
^^ Leakage detection.
Each problem needed a careful analysis of the chemical processes
concerned. A special attention has been paid to the prevention of corrosion
process that easily occurs because of the equipment made of differ
metals jointed together (aluminium, copper, carbon steel) working in very
oxygenated and humid places. These are the typical conditions where
a corrosion process takes place. Corrosion processes, if not properly
treated, can lead to total oxidation of the material (for example aluminium
fins of heat exchangers) or corrosion inside the tubes (for example copper
and iron tubes of the heat exchangers, evaporators, condensers, etc.).
Our chemical know-how allows us to face and solve any problems
excellently.
CHEMICAL PRODUCTS
G-Super Clean E
G-Super Clean C
G-Find
G-Eco Clean
Alkaline-based
product
Acid-based
product
Non foaming
surfactant product
1 Lt.
1 Lt.
1 Lt.
Concentrated
alkaline-based
product
5 Lt.



Characteristics
Ready-to-use product
Concentrated product to be diluted

Product Choise according to the expected Results
Cleaning of Oil and Grease


Oxide and Rust Removal


Dirty Cleaning- Off

Sanitizing




Leak detection
12

Packaging
G-Super Clean E
G-Super Clean C
G-Find
G-Eco Clean
Item Code
F-PC-RE-SCLE-12
F-PC-RE-CLCC-12
F-PC-RE-FIN-12
F-PC-IN-ECC-4
Packaging
12 Bottles - 1 Liter
12 Bottles - 1 Liter
12 Bottles - 1 Liter
4 Bottles - 5 Liter
Pricefor each Packaging
€
€
€
€
GeneralGas
63,00
79,71
84,43
95,43
Medical-Surgical Devices
Products that guarantee the disinfection of surfaces and settings
Hygiene of healthcare settings and surfaces is of fundamental importance for individual and
public health. Surfaces in air conditioning systems are where dust, dirt and a large number of
germs settle more. So air conditioning systems may become a very dangerous source of contamination generating many pathologies.
In order to meet customers’ needs, General Gas has supplemented its own range of products
with a set of Medical and Surgical Devices:
Bactycid Spray - Reg.Min.Sal. N° 19.207
Hygien Spray - Reg. Min. Sal. N° 13.231
^^ Thanks to its specific and efficacious
active principles, Bactycid Spray performs
a bactericidal and fungicidal action that
eliminates bacterial flora.
^^ Bactycid Spray is a multipurposebiocidal
spray for surfaces of air conditioning
systems.
^^ It neutralizes bad smell and scents the air.
^^ Spray with high bactericidal power, based
on phenols and chloride benzalkonium.
^^ It disinfects powerfully finned packs and
pre filters in air conditioning systems.
^^ Respects the regulations EN1276 ed
EN1650.
^^ Eliminates bacteria, including Legionella,
funguses and moulds from the surfaces,
from contaminated objects and from air
conditioning systems.
^^ It is non-corrosive for copper and
aluminium.
Labiosan - Reg. Min. Sal. N° 14.647
Bactycid Foaming Cleaner
^^ For disinfection and cleaning of air
conditioning systems.
^^ It solubilises in water or in the detergent
used.
^^ It prevents the mould growth and
fermentation.
^^ Water hardness does not affect negatively
the product, since Labiosan is unaffected
by calcium and magnesium.
^^ Ready-to-use foaming and sanifying
detergent, suitable for an effective
cleaning and hygiene of finned packs and
filters in refrigeration and air conditioning
systems.
^^ It eliminates bad smell and reduces
mould in the filters.
^^ It prevents mould, fermentation and
bacteria growth, causing allergy.
^^ It leaves a pleasant scent on the surfaces.
Packaging
Medical and Surgical Devices
Item Code
Quantity per Piece
Q.ty
UM
Packaging
Price
UM
Bactycid Spray
F-PC-RE-BS1-12
150
ml.
12 Spray
€
68,57
CF
Hygien Spray
F-PC-RE-HS5-12
500
ml.
12 Spray
€
124,57
CF
Bactycid Foaming Cleaner
F-PC-RE-BF5-12
500
ml.
12 Spray
€
111,00
CF
Labyosan
F-PC-RE-LA1-12
1
lt.
12 Cans
€
90,00
CF
www.generalgas.it
13
Chemical Solutions
Eco-Friendly Solutions for Automotive Systems
General Gas has always paid special attention to the whole production process and is committed
to the ongoing research of innovative solutions. General Gas has developed a series of chemical
products that provide practical and fast solutions. These products are specifically designed
to solve problems that can occur with HVAC&R and Automotive Systems: refrigerant gas leak
detection and repair, A/C system enhancement and dehydration, oil type detection, checking for
acid in lubricants, flushing systems for refrigerant lines. The chemical solutions are:
Kryon
Automotive Applications
Repairing the leak
K-Leak Stop 30
Enhancing energetic performance of Automotive Systems
K-Power 30
Dehydrating the Automotive Systems
K-Dry 30
Neutralizing Acids
K-Neutra 30
Leak Detector Dye for Automotive Systems operating with R134a
K-Dye Y
Leak Detector Dye for Automotive Systems operating with HFO 1234yf
K-Dye YF
Leak Detector Dye for Automotive Hybrid Systems
K-Dye I
Verifiying Quantity and Pressuree of Gas in the System
K-Tester R 134AU
14
GeneralGas
K-Leak Stop 30 - Leak Stop for Automotive Systems
Performance
^^ K-Leak Stop 42 repairs leaks measuring no more than 0.5 mm.
^^ No reaction to moisture or oxygen.
^^ It is only visible when exposed to any U/V light.
^^ Reduces significantly compressor noise, without damaging it.
^^ The product is Polymer-free and is the ideal solution for precautionary actions.
Dosage
Universal Dosage
30 ml
Lubricant Dilution
1 ÷ 16
Packaging
Packaging
Included Accessories
1 Cartridge - 30 ml
Quick-connector R 134a
Description
Item Code
Price
K-Leak Stop 30 - Leak Stop
F-AF-AC-LEAKSTOP30
€
UM
35,04
NR
K-Power 30 - Automotive System Performance Enhancer
Performance
^^ It reduces internal frictions and power consumption up to 10%.
^^ It improves cooling coil heat transfer inside the condenser and the evaporator
up to 15%.
^^ It considerably reduces noise and vibration inside the compressor.
^^ It reduces the maintenance costs and CO2 emissions.
Dosage
Universal Dosage
30 ml
Lubricant Dilution
1 ÷ 16
Packaging
Packaging
Included Accessories
1 Cartridge - 30 ml
Quick-connector R 134a
Description
Item Code
Price
K-Power 30 - Performance Enhancer
F-AF-AL-POWER30
€
UM
23,21
NR
www.generalgas.it
15
K-Dry 30 - Dehydrating Additive for Automotive A/C Systems
Performance
^^ Dehydrating additive that prevents moisture accumulation in Automotive
Systems.
^^ It sets molecules of water in the circuit, avoiding that they react with Poe oils,
producing hydrofluoric acid.
^^ It does not affect the performance of the system,remaining solubilized in the oil.
Dosage
Universal Dosage
30 ml
Lubricant Dilution
1 ÷ 16
Packaging
Packaging
Included Accessories
1 Cartridge - 30 ml
Quick-connector R 134a
Description
Item Code
Price
K-Dry 30 - Dehydrating
F-AF-AL-DRY30
€
UM
8,21
NR
K-Neutra 30 - Automotive System Acid Neutralizer
Performance
^^ It reacts with hydrofluoric or hydrochloric acid which was accumulated in the
system, avoiding that the acids corrode insulating varnishes of the excitation
windings of hermetic and semihermetic compressors.
^^ It does not affect the performance of the system,remaining solubilized in the oil.
^^ Use “K-Oil Acid Test”, in order to verify the presence of acid inside the circuit.
Dosage
Universal Dosage
30 ml
Lubricant Dilution
1 ÷ 16
Packaging
16
Packaging
Included Accessories
1 Cartridge - 30 ml
Quick-connector R 134a
Description
Item Code
Price
K-Neutra 30 - Acid Neutralizer
F-AF-AL-NEUTRA30
€
GeneralGas
UM
14,11
NR
Kryon Leak Detector
K-Dye Y - Leak Detector for Automotive A/C Systems – R134a - Blister 12 Cartridges
Performance
^^ K-Dye Y is a yellow fluorescent dye U/V for the detection of refrigerant gas
leaks in Automotive systems, operating with R134a.
^^ Dye is soluble in POE oil.
^^ Dye Stable up to 200° C; it does not form deposit.
^^ After inserting dye in the system, it will be sufficient inspect the system with an
U/V lamp and K-Dye R will be clearly visible in corrispondence with the leak.
Dosage
Cartridge 7,5 ml
single-dose
Packaging
Packaging
Included Accessories
Blister with 12 cartridges - 7,5 ml
Quick-connector R 134a
Description
Item Code
Price
K-Dye Y x 7,5 - Leak Detector
F-AF-AC-DYE-Y-12x7
€
UM
19,20
CF
K-Dye Y - Leak Detector for Automotive A/C Systems – R134a - Bottle 250 ml
Performance
^^ K-Dye Y is a yellow fluorescent dye U/V for the detection of refrigerant gas
leaks in Automotive systems, operating with R134a.
^^ Dye is soluble in POE oil.
^^ Dye Stable up to 200° C; it does not form deposit.
^^ After inserting dye in the system, it will be sufficient inspect the system with an
U/V lamp and K-Dye R will be clearly visible in corrispondence with the leak.
Dosage
Bottle 250 ML
Add 7.5 ml OF Dye for each 1,5 kg refrigerant
Packaging
Packaging
Included Accessories
Bottle 250 ml
bottle is equipped with dispencer - 7,5 ml
Description
Item Code
Price
K-Dye Y 250 - Leak Detector
F-AF-AC-DYE-Y-250
€
UM
29,00
NR
www.generalgas.it
17
K-Dye YF - Leak Detector for Automotive A/C Systems – HFO1234yf - Blister 12 Cartridges
Performance
^^ K-Dye Y is a yellow fluorescent dye U/V for the detection of refrigerant gas
leaks in Automotive systems, operating with HFO1234yf.
^^ Dye is soluble in POE oil.
^^ Dye Stable up to 200° C; it does not form deposit.
^^ After inserting dye in the system, it will be sufficient inspect the system with an
U/V lamp and K-Dye R will be clearly visible in corrispondence with the leak.
Dosage
Cartridge 7,5 ml
single-dose
Packaging
Packaging
Included Accessories
Blister with 12 cartridges - 7,5 ml
-
Description
Item Code
Price
K-Dye YF x 7,5 - Leak Detector
F-AF-AC-DYE-YF-12x7
€
UM
27,14
CF
K-Dye YF - Leak Detector for Automotive A/C Systems – R134a - Bottle 250 ml
Performance
^^ K-Dye YF is a yellow fluorescent dye U/V for the detection of refrigerant gas
leaks in Automotive systems, operating with HFO1234yf.
^^ Dye is soluble in POE oil.
^^ Dye Stable up to 200° C; it does not form deposit.
^^ After inserting dye in the system, it will be sufficient inspect the system with an
U/V lamp and K-Dye R will be clearly visible in corrispondence with the leak.
Dosage
Bottle 250 ML
Add 7.5 ml OF Dye for each 1,5 kg refrigerant
Packaging
18
Packaging
Included Accessories
Bottle 250 ml
bottle is equipped with dispencer - 7,5 ml
Description
Item Code
Price
K-Dye Y 250 - Leak Detector
F-AF-AC-DYE-YF-250
€
GeneralGas
UM
41,14
NR
K-Dye I - Leak Detector for Automotive A/C Systems – Hybrid and Electric Vehicle - Blister 12 Cartridges
Performance
^^ K-Dye Y is a red fluorescent dye U/V for the detection of refrigerant gas leaks
in Automotive systems, operating in hybrid and electric vehicle.
^^ Dye is soluble in POE oil.
^^ Dye Stable up to 200° C; it does not form deposit.
^^ You can inspect it with an U/V lamp.
^^ Red colour for better visibility also even at naked eye
Dosage
Cartridge 7,5 ml
single-dose
Packaging
Packaging
Included Accessories
Blister with 12 cartridges - 7,5 ml
Quick-connector R 134a
Description
Item Code
Price
K-Dye I x 7,5 - Leak Detector
F-AF-AC-DYE-I-12x7
€
UM
20,26
CF
K-Dye I - Leak Detector for Automotive A/C Systems – Hybrid and Electric Vehicle - Bottle 250 ml
Performance
^^ K-Dye Y is a red fluorescent dye U/V for the detection of refrigerant gas leaks
in Automotive systems, operating in hybrid and electric vehicle.
^^ Dye is soluble in POE oil.
^^ Dye Stable up to 200° C; it does not form deposit.
^^ You can inspect it with an U/V lamp.
^^ Red colour for better visibility also even at naked eye.
Dosage
Bottle 250 ML
Add 7.5 ml OF Dye for each 1,5 kg refrigerant
Packaging
Packaging
Included Accessories
Bottle 250 ml
bottle is equipped with dispencer - 7,5 ml
Description
Item Code
Price
K-Dye I 250 - Leak Detector
F-AF-AC-DYE-I-250
€
UM
37,26
NR
www.generalgas.it
19
Dye Equipment
K-Adapter - Flexible Adapters for R 134a
Packaging
^^ Adapters, which is indispensable to reach inaccessible points.
^^ Made completely in plastic
^^ Suitable to cartridges and Push and Fill system
^^ Hose burst pressure: 60 bar
^^ Safety valve
Description
Item Code
K-Adapter - Flexible Adapters R134a
F-AF-AL-ADAT-R134-F
Price
€
UM
9,64
NR
K-UV Kit - Aluminium Torch + UV Glasses
Packaging
^^ Aluminium UV Torch
^^ UV Safety Glasses - UV light frequency – 410-405 nm
Description
Item Code
Price
K-UV Kit Aluminium UV Torch + UV Glasses
F-AF-AL-TO-GL-001
€
UM
70,04
CF
K-UV Glasses - UV Safety Glasses
Packaging
^^ UV Safety Glasses – UV light frequency – 410-405 nm
20
Description
Item Code
Price
K-UV Glasses - UV Safety Glasses
F-AF-AL-GLASS-001
€
GeneralGas
UM
5,18
NR
K-Detector Kit K1 - Leak Detector Kit - UV System
Performance
The plastic case of Detector Kit K1 includes:
^^ UV Aluminum torch wide range light emitting
^^ UV Safety Glasses - UV light frequency – 410-405 nm
^^ Rechargeable injector 50 ml
^^ Flexible adapters 1/4 SAE- 5/16 SAE
^^ Adapter for 134a system with brass safety valve
^^ K-Dye Y 250 - Tracer leak detection for Automotive Systems – Bottle 250ml
^^ K-Dye Clean 100 - U/V Fluorescent Tracer Dye Cleaner - 100ml Bottle with spray
nozzle
^^ Operating Instruction
Packaging
Description
Item Code
Price
UM
K-Detector Kit K1 - Leak Detector Kit
F-AF-AC-KIT-K1
€
CF
164,29
K-Injector Kit I2 - Syringe-Type Rechargeable Injector with Oil Tracer
Packaging
The plastic case of Detector Kit I2 includes:
^^ 50 ml syringe-type rechargeable injector
^^ 1 adaptor with 120 mm pipe
^^ Bursting pressure of pipe 60 bar
Description
Item Code
K-Detector Kit I2 - Tracer Kit
F-AF-AC-KIT-I1
Price
€
UM
45,71
CF
www.generalgas.it
21
K-Oil Acid Test - Oil Acid Detector
Performance
^^ K-Oil Acid Test is an essential device that allows the detection of acid in
lubricants of HVAC&R Systems.
^^ Easy to use.
^^ K-Oil Acid Test provides accurate reading, visible in a few seconds.
^^ Biodegradable.
^^ Non toxic and non flammable.
Packaging
Packaging
Included Accessories
4 Tester
4 Pipette
Description
Item Code
Price
K-Oil Acid Test
F-AF-AL-OIL-ACID
€
UM
30,71
CF
K-Tester R 134 AU - Tester for Automotive Systems with R 134a
K-Adapter 1/4” SAE
Packaging
^^ K-Tester is used during the first installation of Automotive systems operating
with R134a.
^^ Through the coloured full scale of manometer it is possible to verify the quantity
of refrigerant which is inside the system.
^^ Connecting K-Tester R 134 AU to a refrigerant cylinder, it is possible to topping
upthe system, working directly on the flow control of the tester.
Packaging
22
Description
Item Code
Price
K-Tester for R 134a AUTOMOTIVE
F-AF-AL-TEST-R134AU
€
GeneralGas
UM
82,14
NR
Kryon Solvents
K-Gen Clean 600 - Washing Liquid for Refrigerant Pipes
Performance
K-Gen Clean 600 is the simplest and faster solution to wash small refrigerant pipes
and A/C system’ s components:
^^ Aerosol cylinder, which is pressurized with CO2.
^^ K-Gen Clean 600 is used together with K-Gun GC 600 - a special washing gun
- or is used pushing its rubber cone.
^^ Ready to use product.
^^ Washing pressure (8 bar / 116 psi). The pressure remain constant till the
complete emptying of the cylinder.
^^ Other equipment are not necessary.
Packaging
Description
Item Code
K-Gen Clean 600 Washing Liquid
F-AF-LA-GC600
Price
€
UM
11,07
NR
^^ K-Gen Clean 600
^^ K-Gun GC 600
K-Gun GC 600 - Washing Gun for Refrigerant Pipes
Performance
K-Gun GC 600 is a washing gun, which is used together with K-Gen Clean 600.
Packaging
Description
Item Code
K-Gun GC 600 Washing Gun
F-AF-LA-GUN-GC600
Price
€
UM
60,36
NR
K-Dye Clean 100 - Cleaner for UV Fluorescent Tracer
Performance
^^ Solvent which eliminates Dye stain, after the leakage detection.
Packaging
Description
Item Code
K-Dye Clean 100 Tracer Cleaner
F-AF-AC-DYE-CL100
Price
€
UM
2,93
NR
www.generalgas.it
23
Glycols
Inhibited Ethylene Glycols and Inhibited Polypropylene Glycols
Glycols are secondary heat transfer fluids and are used in refrigeration systems in order to
reduce the amount of refrigerant.
Glycols are used when keeping the system containing the refrigerants away from public areas
is absolutely necessary for safety reasons.
Glycols contain specific corrosion inhibitors that avoid the corrosion of metal parts of systems.
Inhibited Ethylene Glycol is the most used fluid in heat transfer. It is a transparent liquid
and mixable with water.
Phisical Properties
UM
Values
Boiling Point
°C
Min. 160
Ash materials
% p/p
Max. 1.2
Reserve Alkalinity 10% V/V in acqua
ml HCl 0,1 M
Min. 16
°C
Min. 120
-
1,6
Flash Point
Metals Corrotion- aluminium - stainless steel - cast iron copper - brass - soldering alloy
Applications
Glycols are used when a heat transfer
liquid in large refrigeration systems
is needed, as well as in chillers, floor
cooling systems and ice rinks.
Performance
^^ Glycols contain specific inhibitors
that allow the systems to be
protected from corrosion.
^^ Corrosion Inhibitors prevent the
formation of acidity in the system,
reduce the maintenance costs and
make the system operation safer
and more reliable.
Inhibited Ethylene Glycol
Characteristics
Method
Appearance
UM
Values
Visual
Liquid, Clear
Water
3.3 PAQ 8.2-03
% p/p
Max. 5
Density 20°C
3.9 PAQ 8.2-03
g/cc
1,120-1,140
PH - 50% in v/v in water
3.7 PAQ 8.2-03
> 7,5
Packaging
Product
Inhibited
Ethylene Glycol
24
Container
Item Code
Amount
Cube
F-FS-GL_ET-1000KG-C
1.000
Roll Drum
F-FS-GL_ET-235KG-C
235
Roll Drum
F-FS-GL_ET-25KG-C
25
GeneralGas
Price
KG
UM
KG
€
KG
KG
Notes
www.generalgas.it
25
General Gas S.r.l.
www.generalgas.it
Cernusco S/N (MI)
20063 - Via Aosta, 5
+39 02 92141835
+39 02 92141841
Napoli (NA)
80146 - Via Argine Ovest, 125
+39 081 2280111
+39 081 5590640
Lippo di Calderara (BO)
40012 - Via Ungheri, 3/E
+39 051 725312
+39 051 6466319
Pompei (NA)
80045 - Via Vigne S. Antonio, 51/B
+39 081 8611828
+39 081 8618769
Ed. Ottobre 2014