1. No category

MMSSD 2014
Program
International Conference
Multiphysics Modelling and Simulation for Systems Design
Scientific PROGRAM
Wednesday 17 / 12 / 2014
8 h – 9 h 30
Welcome - Registration
9 h 30 – 10 h 00
Opening Ceremony
Professors Mohamed HADDAR, Professor Mohamed Slim ABBES, Professor Mohamed TAKTAK
10 h 00 – 11 h 00
Professor Stanislao PATALANO
Plenary Session 1 : Design methods and tools for digital pattern product and process development
Chair : Professor Fakher CHAARI
11 h 00 – 11 h 20
Coffee break
11 h 20 – 12 h 20
Plenary Session 2 : Professor Jose ANTUNES
Modelling of Musical Instruments: Generic Aspects, Multiphysics And Dynamics
Chair : Professor Tahar FAKHFAKH
12 h 20 – 14 h 00
Lunch
Plenary Session 3 : Professor Abdelkhalak EL HAMI
14h00 – 15h00
Reliability optimisation of materials and structures : Application to electro-thermo-mechanical coupling structures
Chair : Professor Mohamed TAKTAK
December 17 – 19 2014, Sousse, Tunisia
1
MMSSD 2014
Program
Wednesday 17 / 12 / 2014
Topic
Multiphysics Simulation of Systems Material Characterization Failure Analysis and failure mode excitation Chair
Pr. Ahmed BENYAHIA, Pr. Moncef HAMMADI
Pr. Bassem ZOUARI, Pr. Taoufik KHABOU, Pr. Abdelhamid MILOUDI, Pr. Tahar FAKHFAKH
15h00 – 15h20
ID10. Dynamic Analysis Of Structures
Mechanics By The Finite Element Method
Fareh H., Brahim N.
ID12. Numerical Study Of An Amorphous
Material Prepared By ECAE ....
Bouaksa F., Tamine T.
15h20 – 15h40
ID18. Temperature Effect On Shear Flow And
Time Dependant Modelling Of Cutting ....
Hammadi L ., Boudjenane N., Belhadri M.
ID13. Analysis Of The Notched Specimens On
The Fracture Behaviour By The Volumetric ...
Moussaoui M., Meziani S.
15h40 – 16h00
ID26. Effect Of Water Hammer In Relatively
Long Inclined Pipelines
Dallali M., Hadj Taïeb E., Schmitt C., Azari Z.
ID15. New Analytical Model To Study The
Behaviour Of Laminated Composite Plates
Adim B., Rabahi A., Hassaine Daouadji T.
16h00 - 16h20
ID29. Experimental Study Of The Pitching
Blade Effect With A PIV Application
Ben Amira B., Driss Z., Abid M.S.
ID39. Mechanical Characterization Of SemiCrystalline Polymers By Grid Indentation
Dhiflaoui H., Zoghlami L., Cheik Larbi A.
16h20 – 16h40
ID61. 3D Finite Element Model For The Study
Of The Dynamic Behaviour Of ...
Ksentini O., Combes B., Abbes M.S., Daidié A.,
Haddar M.
ID41. Analysis Of Inelastic Behavior Of
Amorphous Polymers
Ouali N., Benyahia A.A
16h40 – 17h00
December 17 – 19 2014, Sousse, Tunisia
ID20. A Comparison Between Two Reliability
Based Optimization Strategies Of Tuned Mass ...
Mrabet E., Guedri M., Ghanmi S., Soula M., Ichchou
M.
ID47. Mechanical behavior and acoustic emission
analysis of the accumulation of cracks .... ,
Ben Ammar I., Karra C., El Mahi A., El Guerjouma
R., Haddar M.
ID58. Fatigue Behavior And Structural Health
Monitoring By Acoustic Emission Of Integrated ...
Masmoudi S., El Mahi A., Turki S., El Guerjouma R.
ID127. New Approach For Fatigue Limit
Prediction Of Defective Material Under Multiaxial
Fatigue ...
Wannes H., Nasr A., Bouraoui C.
ID122. Numerical Simulation Of Incremental
Sheet Metal Forming Process
Ben Said L., Wali M., Dammak F.
Coffee break + Poster Session
2
MMSSD 2014
Program
Wednesday 17 / 12 / 2014
Topic
Multiphysics Simulation of Systems Material Characterization Failure Analysis and failure mode excitation Chair
Pr. Chokri BOURAOUI, Pr. Mohamed TAKTAK
Pr. Angelo CHIANESE, Pr. Mohamed SOULA Pr. Mounir BENAMAR, Pr. Abdelkhalek ELHAMI
17h00 – 17h20
ID129. Experimental Study Of A Nonlinear
Vibration Absorber, Djemal F., Chaari F., Dion
J.L., Tawfiq I., Haddar M.
ID51. Contribution To The Study On Fatigue
Damage Under Random Loading Of ... , Zengah S.,
Aid A., Benguediab M., Bedouba M., Djebli A.
17h20 – 17h40
ID33. Study Of The Aerodynamic Structure
Around An Obstacle With Inclined Roof
Driss S., Driss Z., Kallel Kammoun I.
17h40 – 18h00
ID43. First principal calculations of optical
properties of ingan2 using in solar cells ....
Bennacer H., Berrah S., Boukortt A., Ziane M.I.
ID50. The Study Of The Hardening Precipitates
And The Kinetic Precipitation. ...
Ben Mohamed A., Znaidi A., Baganna M., Nasri R. ID64. Evaluation by wide-angle x-ray scattering
of the particle evolution in polypropylene ...
Boulahia R., Boukharouba T., Gloaguen J.M.
ID70. Interfacial Stresses In Frp-Plated Rc
Beams: Effect Of Adherend Shear Deformations
Rabahi A., Adim B., Chargui S., Hassaine
Daouadji T.
18h00 – 18h20
ID49. Numerical study of the external excitation
amplitude effect on liquid sloshing phenomenon
Bouabidi A., Driss Z., Abid M.S.
ID75. Mechanics Of Interacting Continua
Applied To A Pre-Stressed Hollow Conduit
Ramtani S., Cheref M. ID96. Finite element modelling of high speed spindle
supported by rolling bearings in presence of defects
Kesentini R., Hentati T., Zghal B., Bouaziz S., Hadar M.
18h20 – 18h40
ID53. Mechanical Vibration Cancellation Using
Impact Absorber
Chehaibi K., Mrad C., Nasri R.
ID87. Modern heterogeneous catalyst for biofuel
production: enhancement of conversion ....
Labidi S., Ben Amar M., Passarello J.P., Kanaev A.
ID108. Finite element simulation of fatigue damage
accumulation for repaired component by cold ...
Aid A., Bendouba M., Benguediab M., Amrouche A.
18h40 – 19h00
ID139. Dynamic analysis of helical planetary
gear train coupled to bevel gear
Karray M., Feki N., Chaari F., Haddar M.
ID141. Modelling of discrete structures by
continuous models using finite elements method
Necib B., Hamrit F., Lahlah M.
ID91. Flow Resistivity Measurement Of Porous
Materials From Agriculture Wastes
Othmani C., Zain A., Hentati T., Elnady T., Taktak M.,
Fakhfakh T., Haddar M.
ID111. Geometrically non-linear free vibration of
fully clamped symmetrically laminated composite…
Moulay Abdelali H., Harras B., Benamar R.
ID88. Diagnosis Of A One Stage Spur Gear Using
The Ica Method
Tounsi D., Akrout A., Taktak M., Abbès M.S., Haddar
M.
December 17 – 19 2014, Sousse, Tunisia
3
MMSSD 2014
Program
Thursday 18 / 12 / 2014
8h15 – 9h15
Plenary Session 4 : Professor Jean Yves CHOLEY
Multi-Physics Modeling and Simulation and System Engineering : research issues and education challenges
Chair : Professor Taoufik BOUKHAROUBA
9h15 - 10h00
Round TABLE : Multi-physics / Systems Engineering
Animated by Professors Omar HAMMAMI, Jean Yves CHOLEY, Moncef HAMMADI and Fedia MHENNI
10h00 - 10h20
Coffee break + Poster Session
Topic
Multiphysics Simulation of Systems Material Characterization Systems Engineering Chairs
Pr. Mohamed Slim ABBES, Pr. Ali AKROUT
Pr. Andrei KANAEV, Pr. Said TURKI Pr. Jamel LOUATI, Pr. Slim BOUAZIZ 10h20 - 10h40
ID59. Reducing The Computational Cost In
Sheet Metal Forming Processes By ...
Zekraoui R., Koulli R., Labbaci B.
ID103. investigation and modeling of surface
roughness of hard turned aisi 52100 steel...
Consideration, Meddour I., Yallesse M., Aouissi H.
ID14. Determining The Optimal Periodicity
For Preventive Replacement Of Mechanical ...
Berrehal R., BENISSAAD S.
10h40 - 11h00
ID60. Mechanical Vibration Elimination
Using Friction Absorber
Nasr A., Mrad C., Nasri R.
ID113. Scratch Adhesion Characteristics Of Pvd
Cr/Crn Deposited On High Speed Steel And
Silicon Substrates
Khlifi K., Dhiflaoui H., Ben Cheikh Larbi A.
ID45. An Efficient Genetic Approach For
Assembly Balancing Problems
Triki Hager, Mellouli Ahmed, Masmoudi Faouzi
11h00 - 11h20
ID30. Incidence angle effect on the
aerodynamic structure of an incurved ...
Driss Z., Mlayeh O., Driss D., Maaloul M.,
Abid M.S
ID115. Inverse Identification Of Acoustic
Parameters Of Porous Materials, Bouazizi L.,
Trabelsi H., Hentati T., Taktak M., Haddar M.
ID65. A Multi-Site Supply Chain Planning
Using Multi-Stage Stochastic Programming
Felfel H., Ayadi O., Masmoudi F.
December 17 – 19 2014, Sousse, Tunisia
4
MMSSD 2014
Program
Thursday 18 / 12 / 2014
Topic
Multiphysics Simulation of Systems Material Characterization Systems Engineering Chairs
Pr. Mohamed Slim ABBES, Pr. Ali AKROUT
Pr. Andrei KANAEV, Pr. Jean Philippe PASSARELLEO Pr. Jamel LOUATI, Pr. Slim BOUAZIZ 11h20 - 11h40
ID68. Theoretical and experimental analysis
of the behaviour of a mechanical
Ben Abdelwahed A., Reungoat D., Sommier A.,
Le Borgne E.
ID117. Multiscale modeling of the viscoplastic
behaviour of semicrystalline polymer based ...
Jeridi
M.,
Ayadi
W.,
Ben
Naceur
I.,
Laiarinandrasana L., Sai K.
ID66. A System Engineering Conception Of
Multi-Objective Optimization For Multi-Physics
System
Chen M., Hammami O.
11h40 - 12h00
ID72. Transient Flow Analysis Through
Centrifugal Pumps, Chalghoum I., Elaoud S.,
Akrout M., Hadj Taieb E.
ID119. Vibration Analysis Of Double Delaminated
Glass Fiber Reinforced Composites
Hammami M., Elmahi A., Karra C., Haddar M.
ID71. A Sensitivity Analysis Of Multi-Objective
Coop-Erative Planning Optimization Using
NSGA-II
Ben Yahia W., Ayadi O., Masmoudi F.I
12h00 - 12h20
ID76. Time step size effect on the
hydrodynamic struc-ture around a water
Darrieus rotor
Mabrouki I., Samet A., Driss Z., Abid M.S
ID120. Low velocity impact behavior of glass
fibre-reinforced polyamide
Mars J., Wali M., Delille R., Dammak F.
ID79. Simulation of the dynamic behavior of a
multi-stage geared systems with tooth ...
Fakhfakh H., Bruyère J., Velex P., Becquerelle S.
12h20 - 12h40
ID77. Finite Elements Formulation For
Composite Shafts, Ben Arab S., Bouaziz S.,
Rodrigues J.D., Haddar M.
ID123. A higher order shear strain enhanced
solid-shell element for laminated composites ...
Hajlaoui A., Jarraya A., Wali M., Dammak F.
ID118. Effects Of Cracked Teeth On The
Dynamic Behavior Of Two-Stage Straight Bevel
Gearbox
Hammami A., Walha L., Driss Y., Haddar M.
12h40 - 14h00
December 17 – 19 2014, Sousse, Tunisia
Lunch
5
MMSSD 2014
Program
Thursday 18 / 12 / 2014 – Afternoon
14h00 - 15h00
Topic
Chairs
Plenary Session 5 : Professor Angelo CHIANESE
Photocatalysis Assisted By Core-Magnetic TiO2 Nanoparticles To Degrade The Organic Pollutants Of Olive Mill Wastewater
Chair : Professor A. KANAEV
Multiphysics Simulation of Systems Advanced Numerical and Analytical simulation methodologies and tools Mechatronic Design Pr. Omar HAMMAMI, Pr. Faida MHENNI
Pr. José ANTUNES, Pr. Tahar FAKHFAKH
Pr. S. PATALANO, Pr.Zied DRISS
ID82. Effect the design of the moldboard plow
on the soil tillage process
Ibrahmi A., Bentaher H., Maalej A.
ID86. Mode diffusion and propagation in
cylindrical tube under Varying Temperature
Chaabene S., Bouchoucha F., Ichchou M.N.,
Haddar M.
ID92. Burst Test And J-Integral Crack Growth
Criterion In High Density Poly-Ethylene Pipe ...
Guidara M.A., Bouaziz M.A., Schmitt C., Capelle
J., Hadj Taeib E., Azari Z., Hariri S.
ID11. Simplified Calculation Methods on Smoke
and Temperature Stratification in Ventilated ...
Agred S., Benarous A., Karmed D., Loukarfi L.
ID21. Compact modelling of a piezoelectric
energy harvesting system
Hammadi M., Choley J.Y., Haddar M.
ID34. Contribution to Inverse Kinematic
Modeling of a Planar Continuum Robot Using
...
Amouri A., Mahfoudi C., Zaatri A.
16h00 - 16h20
ID94. Parametric Study Of Micro T-Mixer
With Non-Aligned Inputs, Oualha K., Bouaziz S.,
Michau A., Haddar M., Kanaev A., Ben Amar M.
ID40. Numerical simulation of equivalence ratio
effect on premixed turbulent low swirl stabilized ...
Bentebbiche A., Ouali S.
16h20 - 16h40
ID143. Improvement of mechanical properties
of austempered ductile iron by addition of
alloying elements, Boulifa M.I, Hadji A.
15h00 - 15h20
15h20 - 15h40
15h40 - 16h00
16h40 –17h00
December 17 – 19 2014, Sousse, Tunisia
ID19. A Reduction Model applied to forced
vibration of viscoelastic sandwich structure
Boumediene F., Daya E.M., Cadou J.M., Duigou L.
ID32. Dfmm Approach: Modelling, Formalization
And Choice Of Material And Manufacturing
Processes
Saidi M., Skander A., Kaddeche S.
ID44. On The Application Of The Wave Finite
Elements Method For The Acoustical Propagation
In Waveguides, Kessentini A., Ben Souf M.M., Taktak
M., Bareille O., Ichchcou M., Haddar M.
Coffee break
ID42. Machining In An Intelligent Step-Nc
Format
Malim M., Assas M.
ID46. Agent-Based Approach For The Optimal
Design Of Mechatronic Systems, Guizani A.,
Hammadi M., Choley J.Y., Soriano T., Abbes S.,
Haddar M.
ID48. A Digital Pattern Approach To The
Design Of An Automotive Power Window By
Means Of Object- Oriented Modelling
Patalano S., Vitolo F., Lanzotti A.
6
MMSSD 2014
Program
Thursday 18 / 12 / 2014 – Afternoon
Topic
Multiphysics Simulation of Systems System Engineering Mechatronic Design Chairs
Pr. Ahmed HAFAIFA, Pr. Moez CHAFRA
Pr. Taoufik BOUKHARROUBA, Pr. Mohamed SOULA Pr. Jean Yves CHOLEY, Pr. Faouzi MASMOUDI
ID104. Uncertainty quantification of the
aerodynamic behavior of wind turbine using....
Tounsi M., Abboudi K., Feki N., Beyaoui M., Walha
L., Haddar M.
ID116. Load Sharing Behavior In Planetary Gear Set,
Hammami A., Iglesias M., Fernandez A., Chaari F.,
Viadero F., Haddar M.
ID83. A Preliminary Study On Conceptual Design
Methodology Of A Mechanic System ...
Hamza G., Hammadi M., Barkallah M., Louati J.,
Haddar M., Choley J.Y, Riviere A.
ID105. Dynamic Response Of Bevel Gear
Transmission Used In Vertical Axis Wind ...
Belmabrouk I., Abboudi K., Zghal B., Haddar M.
ID81. A polynomial chaos approach for the analysis of
the dynamic behavior ..., Guerine A., Driss Y., Beyaoui
M., Walha L., Fakhfakh T., El Hami A., Haddar M.
ID57. Rflp Approach In The Designing Of PowerTrains For Road Electric Vehicles, Capasso C.,
Hammadi M., Patalano S., Renaud R., Veneri O.
ID112. Thermal Study Of A Converted Engine
Spark Ignition System
Jemni M.A, Kantchev G., Abid M.S.
ID124. Sustainable Manufacturing: Modeling And
Optimization At The Production Of Sulfuric Acid
Barkallah M., Hassine H., Bellacicco A., Souii S., Louati
J., Riviere A., Haddar M.
ID63. Ac Flashover: An Analysis With Influence Of
The Pollution, Potential And Electric Field ...
Benguesmia H., M'ziou N., Boubakeur A.
18h00 – 18h20
ID121. Burst Pressure Estimation Of Corroded
Pipeline Using Damage Mechanics
Bebzerga D.
ID36. Modeling Of Cutting Forces And Roughness By
The Response Surface Method (Rsm)
Fayçal B., Idriss A.
ID84. Numerical Simulation By Volume Method Of A
Turbulent Flame Diffusion A ...
Djerad A., Bouderah B., Mabrouki I.
18h20 – 18h40
ID16. Finite element analysis of free vibration of
beams with composite coats,
Tekili S., Khadri Y., Merzoug B.
ID132. Influence of cutting parameters on the surface
quality of machined applied ..., Bouhabila H, Boukebbab
S., Benzerga R., Le Paven C, Bidi L
ID90. Fuzzy Modeling And Control Of Centrifugal
Compressor Used In Gas Piplines Systems, Hafaifa A.,
Guemana M., Belhadef R.
18h40 – 19h00
ID31. Experimental Characterization
Naca2415 Airfoil Wind Turbine
Driss Z., Chelbi T., Kaffel A., Abid M.S.
ID55 - Numerical Investigation of Void Fraction
Distribution for Comparative Analysis of Flow…
Garma R., Stiriba Y., Bourouis M., Bellagi A.
ID95. Milling Machine Structure Modelling Using
The Dynamic Substructure Method, Barkallah M.,
Bouaziz A., Abdennadher M., Bouaziz S., Haddar M.
19h00 – 19h20
ID149. Reliability analysis of 3D aircraft’s wing
R. El Maan, , B. Radi, A. El Hami
ID128. Partical Swarm Optimization For The 2d
Guillotine Cutting Problem
Barkallah M., Ayadi O., Masmoudi F.
ID 147. Static and Dynamic analysis of electrically
actuated microbeam
Sarra BEN SASSI, Fehmi NAJAR
17h00 – 17h20
17h20 – 17h40
17h40 – 18h00
Of
A
Conference Dinner
December 17 – 19 2014, Sousse, Tunisia
7
MMSSD 2014
Program
Friday 19 / 12 / 2014
Topic
Multiphysics Simulation of Systems Advanced Numerical and Analytical simulation methodologies and tools
Material Characterization Chairs
Pr. Noureddine OUALI, Pr. Moez ABDENNADHER
Pr. Rachid NASRI, Pr. Lassad WALHA
Pr. Fakhreddinne DAMMAK, Pr. Walid LARBI 8h20 – 8h40
ID131. Finite Difference Method Applied
For Solving Vertical Heat Transfer With
Temperature Independent Coefficients
Dalah M.
ID62. Numerical Investigation Of Guided Wave
Propagation In Composite Structure Using Safe
Hariz M.R, Beyaoui M., Walha L., Laksimi A.,
Haddar M.
ID130. Determination Of Stress Concentration
For Orthotropic And Isotropic Materials Using
Digital Image Correlation (Dic)
Makki Mhalla M.M., Bouraoui C.
8h40-9h00
ID134. Fouling In Plate Heat Exchangers
During Milk Treatment Using 3d Dynamic...
Mahdi Y., Mouheb A., Absi R.
ID74. Vibro-Acoustic Analysis Of Laminated
Double-Wall: Finite Element Formulation And
Reduced
Larbi W., Deü J.F., Ohayon R.
ID137. Displacement Influence On Frequencies
And Modal Deformations Of A Sandwich Beam
Chenini I., Nasri R., Abdelli Y.
9h00-9h20
ID135. Experimental Characterisation Of A
Particle Damper
Marwa Masmoudi, Stephan Job, Mohamed
Slim Abbes, Imed Tawfiq, Mohamed Haddar
ID144. Experimental assembly characterization of
AISI 304 steel sheets spot welded and prediction of
failure modes
T. Chebbi, B. Tlili, M. Chafra
ID138. Numerical Simulation Of Bending Tests
On High Performance Concrete At Elevated
Temperatures With A Dam
S. Djaknoun, E. Ouedraogo, A. Ahmed Benyahia
9h20-9h40
ID102. Iterative methods for steady state
looped network analysis
Zahreddine Hafsi, Sami Elaoud, Mohsen
Akrout, Ezzeddine Hadj Taieb
ID93. Solving The Three-Dimensional TimeHarmonic Maxwell Equations By Discontinuous
Nabil Gmati, Stéphane Lanteri, Anis Mohamed
ID133. The Extended Finite Element Method
For Cracked Incompressible Hyperelastic
Zaafouri Mehrez, Wali Mondher, Abid Said, Jamal
Mohammed, Dammak Fakhreddine
9h40-10h 00
ID140. Evaluation By Wide-Angle X-Ray
Scattering Of The Particle Evolution In
Ramdane Boulahia, Taoufik Boukharouba,
Jean Michel Gloaguen
ID85. Reconstruction Of Acoustic Sources In Duct
Systems By The Independent Component Analysis
Raja Dhief, Ali Akrout, Dhouha Tounsi, Mohamed
Taktak, Mohamed Haddar
ID106.
Characterisation,
Sorption
And
Transport Of Lead In Silty Soil
Sana Dardouri, Jalila Sghaier, Ahmed Bellagi
December 17 – 19 2014, Sousse, Tunisia
8
MMSSD 2014
Program
Friday 19 / 12 / 2014
Topic
Multiphysics Simulation of Systems Chairs
Pr. Noureddine OUALI, Pr. Moez Abdennadher
10h00-10h20
ID114. Multiphysics Modelling Of Uav
Omar Hammami, Meher Mrabet
10h20-10h40
ID98. The Nes’s Limits And The Contribution
Of Active Control
Hamza Bouaziz, Nicolas Peyret, Gael Chevallier,
Mohamed Slim Abbes, Mohamed Haddar
10h40-11h00
ID67. Falling film in a heated micro-channel
Sabrine Mejri, Olivier Fudym, Jalila Sghaier,
Ahmed Bellagi
Advanced Numerical and Analytical simulation methodologies and tools
Pr. Lassad WALHA, Pr. Ali AKROUT
ID 148. In-plane dynamic stiffness matrix of
orthotropic Kirchhoff plate for symmetricsymmetric contribution
Olfa Ghorbel, Jean-Baptiste Casimir, Lotfi
Hammami, Imad Tawfiq, Mohamed Haddar
ID78. Torque Loss In Helical Gears H501
Lubricated With Wind Turbine Gear Oils
Maroua Hammami, Carlos Fernandes, Slim
Bouaziz, Jorge Seabra, Mohamed Haddar
ID23. Modelling and Simulation for Vertical
Rail Vehicle Dynamic Vibration with Comfort
Evaluation
Mortadha Graa, Mohamed Nejlaoui, Ajmi Houidi,
Zouhaier Affi, Lotfi Romdhane
11h00-11h30
Coffee break + Poster Session
11h30-12h00
Closing Ceremony
December 17 – 19 2014, Sousse, Tunisia
Material Characterization Pr. Fakhreddinne DAMMAK, Pr. Walid LARBI ID110. Electrical Modelling Of Induction Machines
Behaviour In Angular Domain
Aroua Fourati, Nabih Feki, Adeline Bourdon, Didier
Remond, Fakher Chaari, Mohamed Haddar
ID52. Multidisciplinary Design Optimization In
Small Satellite
Boudjemai, Abdelmoumen Bacetti, Mohammed Amine
Zafrane, Rachida Hocine
ID56. A New Multi-Objective Collaborative
Optimization (New Moco 1) Approach Applied In A
Multiphysics Optimization Problem
Hamda Chagraoui, Samir Ghanmi, Mohamed Guedri,
Mohamed Soula, Noureddine Bouhaddi
9
MMSSD 2014
Program
Poster sessions
ID 16. Finite element analysis of free vibration of
beams with composite coats,
Tekili Sabiha, Khadri Youcef, Merzoug Bachir
ID 27. Study of the influence of temperature on
the surface conversion processing of a cemented
and coated steel with a chromium film
Boubaaya Rabah
73. Modelling and optimization of surface roughness
and material removal rate based on grey relational
analysis method
Bouzid Lakhdar, Yallese Mohamed Athmane, Belhadi
Salim, Meddour Ikhlas, Mabrouki Tarek
80. Application of Taguchi Method for
Determining Optimum Surface Roughness and
Cutting Force in Dry Turning of AISI D3 Steel,
Oussama Zerti, Mohamed Athmane Yallese, Salim
Belhadi
126 - Mechanical behaviour analysis method of
polymer material case of the polypropylene,
Meddah Hadj Miloud, Ould Chikh El Bahri, Khellafi
Habib, Benguediab Mohamed, Merdji Ali,
145. Presentation of ECONANO TEMPUS
project (543924-TEMPUS-1-2013-IT-TEMPUSJCPR)
Passarello Jean-Philippe
ID69. Study contribution of the surface state after
annealing of a steel 42CrMo4 part machined by turning
with a ceramic tool and a carbide tool, Aouad Razika, Amara
Idriss
ID35. Experimental And Numerical Study Of Beams Under
Low-Velocity Impact
Neder M., Miloudi A.
December 17 – 19 2014, Sousse, Tunisia
ID24. Localization Of Impact On A Beam By Time
Reversal Method
Chaterbache O., Miloudi A.
28. Effect of plasma spray parameters on
the adhession of Al2O3-3TiO2,
Djendel Mokhtar
125 - Fatigue Crack growth Rate (FCGR)
Modelling Based on Damaged Zone Ahead
of the Crack tip,
Ould Chikh el Bahri, meddah hadj miloud,
Imad Abdelatif, merdji Ali
150. Comparative Study between Direct
Torque Control and Sliding Mode
Control of Senseless Induction
Machine
Fouad Berrabah, Saad Salah, Zaamouche
Fares, Hani Benguesmia
ID25. Early Detection Of Gear Failure By
Vibration Analysis, Merzoug M., Ait-Sghir K.,
Miloudi A., Dron J.P., Bolaers F.
10