Sharp “Knifo” Tips:
“Knice” Bargains by Johan Oosthuysen
from www.KMTs.co.za‘s complementary How-2... Series
www.KMTs.co.za BARGAIN CORNER
Please refer to the procedures and conditions below!!!
SURFACE GRINDER
The machine can work with the standard grinding wheels BUT has also been retrofitted
to take belts. It’s a 3 phase machine that I have had running on a Leroy Somer
DIGIDRIVE to get a nice range of different RPM’s.
Please Phone Gordon Barnard
Email [email protected]
Cell: 076 909 6523
Sharp “Knifo” Tips:
“Knice” Bargains by Johan Oosthuysen
from www.KMTs.co.za‘s complementary How-2... Series
Kiln for sale R3500.00
Phone Bart Fanoy
Cell: 082 410 2704
Knifemaking machines, knifemaking tools, knifemaking supplies / materials and free advice is available from
www.KMTs.co.za, contact us at 087 808 2400/1, [email protected] or visit our web-site
www.KMTs.co.za
If you make knives you are in a danger zone and need to take all precautions necessary to safeguard yourself and people around you. Yes, you, and nobody else, not your employee, not your visitor, not
your friend, not your client, not your supplier, not your advisor, not your dog - only you! By accepting any information offered in this document, you acknowledge and accept this responsibility.
Disclaimer: www.KMTs.co.za, it's management, employees or author, will not be held responsible for any damage or personal injury forthcoming from information contained in this document.
December
15, 2014
Page: 2
Sharp “Knifo” Tips:
“Knice” Bargains by Johan Oosthuysen
from www.KMTs.co.za‘s complementary How-2... Series
For Sale: Cutlermatic Belt Grinder
R5500.00 o.n.c.o
To be collected in Standerton Mpumalanga
Contact Derek
0833477644
Motor Speed: 1440rpm
1.1kw
200mmx 50mm crowned drive wheel
 Contact Wheel 250mmx35mm
 Adjustable light
 Platen between grind wheels for taper handle
 Grind rest
 Bevel grind rest
 Quick change belt
 Belts are widely available 35mm x200mm
 Positive tracking of belts
 Excellent condition
=
Knifemaking machines, knifemaking tools, knifemaking supplies / materials and free advice is available from
www.KMTs.co.za, contact us at 087 808 2400/1, [email protected] or visit our web-site
www.KMTs.co.za
If you make knives you are in a danger zone and need to take all precautions necessary to safeguard yourself and people around you. Yes, you, and nobody else, not your employee, not your visitor, not
your friend, not your client, not your supplier, not your advisor, not your dog - only you! By accepting any information offered in this document, you acknowledge and accept this responsibility.
Disclaimer: www.KMTs.co.za, it's management, employees or author, will not be held responsible for any damage or personal injury forthcoming from information contained in this document.
December
15, 2014
Page: 3
Sharp “Knifo” Tips:
“Knice” Bargains by Johan Oosthuysen
from www.KMTs.co.za‘s complementary How-2... Series
Rayner Gordon
Sel: 082 800 4929
2.2KW Vacon Veriable speed For R2000.00
Disc Grinder
Model: Delux Disc grinder mounted on a swivel base
R3000 (Nuut R4900) Herbst Model prys afgebring...Dringend te koop
Theo Verster
Tel: 078 911 6312
Surface Grinder. Ingar RT-612
Floor Standing, 400mm Travel
300mm X 150mm Magnetic Table
Fitted with VSD. For 220v operation
R18 500.oo
Mac-Afric HQ 400/3 3-1 Lathe
Comes with Spare 4 jaw Chuck
R8 500.oo
Ryobi 405mm Scroll Saw SC1600VL
Knifemaking machines, knifemaking tools, knifemaking supplies / materials and free advice is available from
www.KMTs.co.za, contact us at 087 808 2400/1, [email protected] or visit our web-site
www.KMTs.co.za
If you make knives you are in a danger zone and need to take all precautions necessary to safeguard yourself and people around you. Yes, you, and nobody else, not your employee, not your visitor, not
your friend, not your client, not your supplier, not your advisor, not your dog - only you! By accepting any information offered in this document, you acknowledge and accept this responsibility.
Disclaimer: www.KMTs.co.za, it's management, employees or author, will not be held responsible for any damage or personal injury forthcoming from information contained in this document.
December
15, 2014
Page: 4
Sharp “Knifo” Tips:
“Knice” Bargains by Johan Oosthuysen
from www.KMTs.co.za‘s complementary How-2... Series
Brand New.
Variable speed.
R1600.oo
Knifemaking Belt Grinder. Completely refurbished. Ready to be used
Comes with 200mm contact wheel.
Motor: 220v 1450rpm 1.1kV
R8 500.oo
FOR SALE
C41-25 – 25Kg Hammer
Still brand new still standing on the shipping pallet
Price R35000.00
Contact details: Zacharias Jooste
Tel: 011 284 9600
Sel: 082 886 9982
Knifemaking machines, knifemaking tools, knifemaking supplies / materials and free advice is available from
www.KMTs.co.za, contact us at 087 808 2400/1, [email protected] or visit our web-site
www.KMTs.co.za
If you make knives you are in a danger zone and need to take all precautions necessary to safeguard yourself and people around you. Yes, you, and nobody else, not your employee, not your visitor, not
your friend, not your client, not your supplier, not your advisor, not your dog - only you! By accepting any information offered in this document, you acknowledge and accept this responsibility.
Disclaimer: www.KMTs.co.za, it's management, employees or author, will not be held responsible for any damage or personal injury forthcoming from information contained in this document.
December
15, 2014
Page: 5
Sharp “Knifo” Tips:
“Knice” Bargains by Johan Oosthuysen
from www.KMTs.co.za‘s complementary How-2... Series
Please contact Lauren at 081 237 9737 or
Vanessa on: 082 851 7121
Anvil only : R 12 000
Height: 380mm
Width: 155mm
Length: 950mm
Kiln + 6 Crucilbles (A16) only : R11 500
Internal size of kiln: 340mm x 340mm x 380mm
deep
Buy Anvil and Kiln/crucibles together for =
R 19 800
Knifemaking machines, knifemaking tools, knifemaking supplies / materials and free advice is available from
www.KMTs.co.za, contact us at 087 808 2400/1, [email protected] or visit our web-site
www.KMTs.co.za
If you make knives you are in a danger zone and need to take all precautions necessary to safeguard yourself and people around you. Yes, you, and nobody else, not your employee, not your visitor, not
your friend, not your client, not your supplier, not your advisor, not your dog - only you! By accepting any information offered in this document, you acknowledge and accept this responsibility.
Disclaimer: www.KMTs.co.za, it's management, employees or author, will not be held responsible for any damage or personal injury forthcoming from information contained in this document.
December
15, 2014
Page: 6
Sharp “Knifo” Tips:
“Knice” Bargains by Johan Oosthuysen
from www.KMTs.co.za‘s complementary How-2... Series
vertical grinder for sale
R8000.00 each
Phone Mark Nieuwenhuis
SEL: 082 442 8252
Email: [email protected]
Knifemaking machines, knifemaking tools, knifemaking supplies / materials and free advice is available from
www.KMTs.co.za, contact us at 087 808 2400/1, [email protected] or visit our web-site
www.KMTs.co.za
If you make knives you are in a danger zone and need to take all precautions necessary to safeguard yourself and people around you. Yes, you, and nobody else, not your employee, not your visitor, not
your friend, not your client, not your supplier, not your advisor, not your dog - only you! By accepting any information offered in this document, you acknowledge and accept this responsibility.
Disclaimer: www.KMTs.co.za, it's management, employees or author, will not be held responsible for any damage or personal injury forthcoming from information contained in this document.
December
15, 2014
Page: 7
Sharp “Knifo” Tips:
“Knice” Bargains by Johan Oosthuysen
from www.KMTs.co.za‘s complementary How-2... Series
Procedures and Conditions
$
$
$
Looking for or wanting to sell knife making bargains?
This small's addition consists of a FOR SALE and WANTED section, exclusive to
www.KMTs.co.za customers, who are invited to advertise their needs to other
www.KMTs.co.za customers and internet visitors, advertising is for free.
www.KMTs.co.za reserve the right to accept, reject or alter advertisements in the interest of
fair trade and to protect it’s own and it’s clients interests.
If you want to place a FOR SALE or WANTED advert
$
e-Mail your advert, containing item information, description, photo if you wish, price, availability
and your information to [email protected]
$
We will place the advert with the advertisers contact information.
$
Interested buyers can contact the advertisers directly.
$
Once the item is sold, the advertiser agrees to advise us of the sale, in order to have it
removed from the bargain corner.
If you are interested in an offer in either the FOR SALE or WANTED section
$
Contact the person placing the advert directly.
$
When the item is no longer on offer, please advise us in order to have it removed.
Knifemaking machines, knifemaking tools, knifemaking supplies / materials and free advice is available from
www.KMTs.co.za, contact us at 087 808 2400/1, [email protected] or visit our web-site
www.KMTs.co.za
If you make knives you are in a danger zone and need to take all precautions necessary to safeguard yourself and people around you. Yes, you, and nobody else, not your employee, not your visitor, not
your friend, not your client, not your supplier, not your advisor, not your dog - only you! By accepting any information offered in this document, you acknowledge and accept this responsibility.
Disclaimer: www.KMTs.co.za, it's management, employees or author, will not be held responsible for any damage or personal injury forthcoming from information contained in this document.
December
15, 2014
Page: 8