AM/FM/HD-Radio™ radio receiver IC

TDA7708
AM/FM/HD-Radio™ radio receiver IC
Data brief
Description
The TDA7708 is a single chip fully-CMOS AM/FM
single-channel tuner for terrestrial radio receiver
applications.
The TDA7708 features multiple front-end lownoise amplifiers (LNAs) to cover AM LW/MW/SW
bands, and the entire FM band, with advanced
DSP-controlled automatic gain control (AGC)
amplifier and mixer stages.
*$3*36
VFQFPN64 (9 x 9 x 0.85 mm)
After on-chip IF filtering, the TDA7708 digitizes
the signal with a very high dynamic range ADC; it
processes the complex phase-quadrature baseband signal allowing applications like multipath
noise mitigation, and integrated RDS decoding.
The TDA7708 furthermore integrates the
HD-Radio™ channel filtering.
Features
 Fully automotive grade CMOS design
 AM/FM Band
 Low-IF, DSP-based architecture
 Very high dynamic range built-in IF-ADC
 Minimum external component count
 Very small footprint package
 Optional Multipath noise mitigation processing
 Compatible with HD-Radio™
Besides providing optimal AM/FM quality
reception, the TDA7708 allows to realize a
complete HD-Radio™ receiver solution (in
combination with the external STA680
HD-Radio™ digital decoder coprocessor), with a
low bill of material, high performance and
automotive grade quality and reliability.
TDA7708 is pin-to-pin compatible with ST's dualchannel tuner TDA7707, allowing efficient design
of scalable terrestrial radio-receiver platforms.
 Digital Audio Output
 Fully RoHS-compliant
Table 1. Device summary
Order code
Package
Packing
TDA7708
VFQFPN64
(9 x 9 x 0.85 mm)
Tray
December 2014
DocID027311 Rev 1
For further information contact your local STMicroelectronics sales office.
1/7
www.st.com
Contents
TDA7708
Contents
1
Block and typical application diagrams . . . . . . . . . . . . . . . . . . . . . . . . . 3
2
Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2/7
DocID027311 Rev 1
TDA7708
Block and typical application diagrams
Figure 1. Block diagram
$*&
&21752/
,&63,
LQWHUIDFH
$0
'63
&/867(5
ƒ
ƒ
,6
''&
$'&
$*& VHQVH
1
Block and typical application diagrams
'$&
$'&
)0
ƒ
6833/<
9&2
9
9,&6
LQWHUIDFH
+:
$&&(/(5$
7256
ƒ
3//
+'5DGLR
LQWHUIDFH
&5<67$/
26&
*$3*36
0+]
Table 2. Main features list
Features list
Number of Channels
1
Reception Band
AM/FM
AM/FM Weak-Signal-Processing
√
RDS decoder
√
Supported (1)
HD-Radio™ 1.0
Base Band Interface
I2S
VICS interface
√
Control interface
I2C/SPI
Digital Audio out
√
Stereo audio DAC
√
1. With external coprocessor.
DocID027311 Rev 1
3/7
7
Block and typical application diagrams
TDA7708
Figure 2. Typical AM/FM application with optional STA680 HD-Radio™ decoder
6'5$0
)/$6+
0+]
,4%DVHEDQG
;2 ;,
$0)0
EOHQG
7'$
)0DXGLR,6
GLJLWDODXGLR
,6
/5
,&
67$ 63,,&
$XGLR
3URFHVVRU
+RVW
X&
,&63,
3RZHU
$PSOLILHU
.H\SDG
'LVSOD\
*$3*36
Table 3. Absolute maximum ratings
Symbol
Parameter
Vs
Supply voltage
Ptot
Power dissipation
Tamb
Ambient temparature range
Min
Typ
Max
Units
3.15
3.3
3.45
V
-
0.75(1)
-
W
1. Typical use-case.
4/7
DocID027311 Rev 1
-40 to +85
°C
TDA7708
2
Package information
Package information
In order to meet environmental requirements, ST (also) offers these devices in ECOPACK®
packages. ECOPACK® packages, are lead-free. The category of second Level Interconnect
is marked on the package and on the inner box label, in compliance with JEDEC Standard
JESD97. The maximum ratings related to soldering conditions are also marked on the inner
box label.
ECOPACK® is an ST trademark. ECOPACK® specifications are available at: www.st.com.
Figure 3. VFQFPN64 mechanical data and package dimensions
$)-
!
MM
INCH
-).
490
-!8
-).
490
!
!
!
2%&
B
B
"3#
%
"3#
%
E
2%&
$
$
"3#
"3#
"3#
"3#
.
$
%
,
,
,
MIN MAX
ȭ
0
/54,).%!.$
-%#(!.)#!,$!4 !
-!8
6&1&0.
XXMMPITCH
6ERY&INE1UAD&LAT0ACKAGE.OLEAD
-AXIMUMALLOWABLEBURRSISMMINALLDIRECTIONS
"
*$3*36
Package is compliant to IPC/JEDEC J-STD-020D June 2007 standard Moisture/Reflow
Sensitivity Classification for Nonhermetic Solid State Surface Mount Devices", MSL Level 3.
DocID027311 Rev 1
5/7
7
Revision history
3
TDA7708
Revision history
Table 4. Document revision history
6/7
Date
Revision
16-Dec-2014
1
Changes
Initial release.
DocID027311 Rev 1
TDA7708
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on
ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or
the design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2014 STMicroelectronics – All rights reserved
DocID027311 Rev 1
7/7
7