1. No category

4th International Conference on Composites: Characterization, Fabrication, and Application (CCFA-4)
December 16-17, 2014, Iran University of Science and Technology, Tehran, Iran
Final Program
December 16, 2014
8:00-8:30
8:30-9:00
10:00-10:30
On-site Registration
Open Ceremony / Welcoming by Conference Co-Chairs: M. M. Shokrieh & A. Varvani
Keynote Speaker: H.R. Ovesy, Department of Aerospace Engineering, Amirkabir University of Technology, Iran
Parametric Instability of Laminated Composite Cylindrical Shells containing Delamination
Keynote Speaker: G. Minak, Department of Industrial Engineering (DIN), Universita` di Bologna, Italy
Impact on curved composite laminates: influence of pre-stress and curvature
Coffee/Tea Break
12:00-13:30
Pray & Lunch
9:00-9:30
9:30-10:00
Poster Presentations (10:30-12:00)
Sessions
Room 1
13:30-14:50
Characterization
14:50-15:30
Coffee/Tea Break
15:30-16:50
Characterization
Conference sessions adjourn for the day
Oral Presentations
Room 2
Room 3
Room 4
Fracture
Nanomaterials
Analysis and Safety
Fabrication
Nanocomposites
Analysis and safety
December 17, 2014
8:30-9:15
9:15-9:45
On-site Registration
Keynote Speaker: M. Tehrani, Department of Mechanical Engineering, University of New Mexico, USA
Next Generation Multifunctional Composites
I
9:45-10:30
Coffee/Tea Break
12:00-13:30
Pray & Lunch
Poster Presentations (10:30-12:00)
Sessions
13:30-14:50
14:50-15:30
Room 1
Characterization
Oral Presentations
Room 2
Room 3
Room 4
Fracture
Nanomaterials
Analysis and Safety
Application
Nanomaterials
Analysis and Safety
Coffee/Tea Break
Characterization
Room 5
15:30-16:50
Design and Analysis
Conference closing session
Main Hall
December 16, 2014
08:30-09:00
09:00-09:30
09:30-10:00
Open Ceremony / Welcoming by Conference Co-Chairs: M. M. Shokrieh & A. Varvani
Keynote Speaker:
H.R. Ovesy, Department of Aerospace Engineering, Amirkabir University of Technology, Iran
Parametric Instability of Laminated Composite Cylindrical Shells containing Delamination
Keynote Speaker:
G. Minak, Department of Industrial Engineering (DIN), Universita` di Bologna, Italy
Impact on curved composite laminates: influence of pre-stress and curvature
Coffee/Tea Break
December 17, 2014
09:15-09:45
Keynote Speaker:
M. Tehrani, Department of Mechanical Engineering, University of New Mexico, USA
Next Generation Multifunctional Composites
Coffee/Tea Break
II
Room 1 (December 16, 2014)
Session Chairs: Khalili, S.M.R. and Taheri-Behrooz, F.
13:30-13:50
A-10-1245-3
13:50:14:10
A-10-1167-3
14:10-14:30
A-10-1177-1
14:30-14:50
A-10-1265-2
Subject: Characterization
Experimental and Micromechanics Characterization of Shape Memory Alloy Short Wires Reinforced Epoxy Resin
Khalili, S.M.R., Saeedi, A.
K.N. Toosi University of Technology
Experimental Investigation of a New Natural Sandwich Panel with Oak Cupules Core Under Uniform out of Plane
Compression
Niknejad, A., Taghizadeh, A.
Yasouj University
Processing of Al/Mg/Ti Composite by Accumulative Roll Bonding (ARB)
Darvish Motevalli, P., Eghbali, B.
Sahand University of Technology
The Effect of Fibers Hybridization on Hole Stress Concentration in a Hybrid Composite Lamina Subjected to Matrix
Plasticity
Taghipour Birgani, P., Shishesaz, M.
Ahvaz Branch, Islamic Azad University
Room 2 (December 16, 2014)
Session Chairs: Ovesy H.R. and Mohammadi, B.
13:30-13:50
A-10-1091-1
13:50:14:10
A-10-1184-1
Subject: Fracture
Dynamic Delamination Growth Analysis in Buckled Composite Laminates Using Variational Principle
Naghinejad M., Ovesy H.R., Kharazi M.
Amirkabir University of Technology
Evaluation of Fracture Properties of Acrylonitrile Butadiene Styrene Polymeric Material Using Arcan Test Method
under Combined Loading Conditions
Oskui, A. E., Choupani, N., Khamneh, M. S.
Sahand University of Technology
III
14:10-14:30
A-10-1259-1
14:30-14:50
A-10-1079-2
Optimization of Composite Laminates for Minimum Weight and Delamination Fatigue Crack Growth Rate using
NSGA-II
Kamaloo, A., Madoliat, R., Ghasemi-Ghalebahman, A.
Semnan University
Numerical Investigation on Modal Characteristics of a Delaminated Composite Beam
Torabi, K., Shariatinia M., Heidari-Rarani, M.
University of Kashan
Room 3 (December 16, 2014)
Session Chairs: Minak, G. and Esmkhani, M.
13:30-13:50
A-10-1065-1
13:50:14:10
A-10-1099-2
14:10-14:30
A-10-1246-1
14:30-14:50
A-10-1231-1
Subject: Nanomaterials
Impact Response of Composite Laminates Interleaved By PCL Nanofibers
Minak, G., Saghafi H., Zucchelli, A.
Universita` di Bologna
A Novel Model to Predict the Fatigue Life of Hybrid Carbon Nanofiber/Chopped Strand Mat/Epoxy Composites
Based on Energy Method
Shokrieh M. M., Danesh, M., Esmkhani, M.
Iran University of Science and Technology
An Experimental Study on Free Vibration of Nanostructured Laminated Beams
Sabet, S.M., Sadighi, M., Ohadi, A.R.
Amirkabir University of Technology
Reinforcing Effect of Nanoclay on Mechanical Properties of Woven Glass Epoxy Composites
Afrouzian, A., Liaghat, G.H., Pol, M.H., Mehrabani Yeganeh, E.
University of Tarbiat Modares
Room 4 (December 16, 2014)
Session Chairs: Safarabadi, M. and Rafiee. R.
13:30-13:50
A-10-1078-1
13:50:14:10
A-10-1087-1
Subject: Analysis and Safety
Micro-Thermal Residual Stress Concentration in Three-Phase Fiber-Reinforced Composites
Safarabadi, M.
University of Tehran
Simulation of Long-Term Behavior in Composite Pipes
Rafiee. R., Mazhari B.
University of Tehran
IV
14:10-14:30
A-10-1132-1
14:30-14:50
A-10-1107-1
Simulation of Shape Memory Polymer Stent Using FEM
Abbasi Shirsavar, M., Golzar, M., Baghani, M.
University of Tarbiat Modares
Finite Element Modeling of Thin Composite Plate with Embedded Piezoelectric Active Elements
Paknejad, A., Rahimi, Gh.
University of Tarbiat Modares
Coffee/Tea Break
Room 1 (December 16, 2014)
Session Chairs: Kabir, M.Z. and Khoramishad, H.
15:30-15:50
A-10-1131-1
15:50:16:10
A-10-1075-1
16:10-16:30
A-10-1353-1
16:30-16:50
A-10-1352-1
Subject: Characterization
Analysis and Optimization of Tensile Strength of PVC/Fiberglass Composite Laminates
Zal, V., Moslemi Naeini, H., Bahramian, A. R., Abbaszadeh, B., Abdollahi, H.
Tarbiat Modares University
The Effect of PP Fiber and Textured Yarn on Flexural Properties of Cement Based Composites
Behdouj, Z., Jamshidi, M., Latifi, M., Halvaei, M.
Iran University of Science and Technology
Low Weight Composite Proppant for Hydraulic Fracturing of Subterraneous Formation: Experimental Analysis
Zoveidavianpoor, M., Gharibi, A., Farokhi, A., Nasef, M. M.
Universiti Teknologi Malaysia
3D Printing of Biocomposites for Bone Tissue Engineering
Vaezi, M., Yang, S.
University of Southampton
Room 2 (December 16, 2014)
Session Chairs: Golzar, M. and Hashemi, R.
15:30-15:50
A-10-1310-1
Subject: Fabrication
Ratcheting Response of Particle-Reinforced Metal-Matrix Composite under Asymmetric Stress Cycles
Ahmadzadeh, G.R., Varvani-Farahani, A.
Ryerson University
V
15:50:16:10
A-10-1292-1
16:10-16:30
A-10-1168-2
16:30-16:50
A-10-1269-1
A Novel Fabrication Method for a Bio-Actuator Based on Ionic Metal-Polymer Composite
Esmaeili, E., Rastegar, H., Kolahdouz, M. R. and Hamedi, M.
University of Tehran
Effect of Alumina Content on the Properties of Al-Al2O3 Composites Fabricated via Flake Powder Metallurgy
Eftekhari-Milani P., Akhlaghi F.
University of Tehran
In Situ Fabrication of Multi Layers Al-Al2O3 Functionally Graded Composite via Hot Press Method
Haghi, S. M. A., Sajjadi, S. A., Babakhani, A.
Ferdowsi University of Mashhad
Room 3 (December 16, 2014)
Session Chairs Jalali-Arani A. and Esmkhani, M.
15:30-15:50
A-10-1240-1
15:50:16:10
A-10-1223-1
16:10-16:30
A-10-1108-1
16:30-16:50
A-10-1060-1
Subject: Nanocomposites
Preparation and Tribological Properties of Electroless Ni-P-Graphene Nanocomposite Coating
Hoseinizade, M.S., Lotfi, B., Sadeghian, Z., Kazeminezhad, E.
Shahid Chamran University
Mechanical and Morphological Properties of LDPE/Perlite Nanocomposite Films
Sahraeian R., Esfandeh M.
Iran polymer and Petrochemical Institute
Effect of Feeding Sequence of (PP/SBR/MWCNT) on the Morphology of Nanocomposite
Khanmohammadi, S., Jalali-Arani, A., Nazokdast, H.
Dep. of Polymer Eng. & Color Tech
Preparation and Structural Characterization of Silica/Organoclay Nanocomposite Aerogels
Pashaei Soorbaghi, F., Kokabi, M., Bahramian, AR.
Tarbiat Modares University
Room 4 (December 16, 2014)
Session Chairs: Taheri-Behrooz, F. and Mohammadi, B.
15:30-15:50
A-10-1297-1
Subject: Analysis and Safety
Critical buckling load prediction of composite cylinders by using various shell theories and FEM under compressive
loading
Taheri-Behrooz, F., Omidi, M.
Iran University of Science and Technology
VI
15:50:16:10
A-10-1112-1
16:10-16:30
A-10-1104-2
16:30-16:50
A-10-1267-1
Buckling of Compressively Loaded Orthotropic Edge Reinforced Plates
Pakdel, H., Mohammadi, B.
Iran University of Science and Technology
Buckling Analysis of Cracked FGM Plates under Mechanical Loadings
Navi, M., Kabir, M.Z.
AmirKabir University of Technology
Analytical Modeling of a Novel FRP-Encased Steel–Concrete Composite Column
Ghobadi, F., Abdollahzadeh, G.R.
University of Tabriz
Conference sessions adjourn for the day
Room 1 (December 17, 2014)
Session Chairs: Ayatollahi, M. R. and Heidari-Rarani, M.
13:30-13:50
A-10-1156-1
13:50:14:10
A-10-1210-1
14:10-14:30
A-10-1272-1
14:30-14:50
A-10-1068-1
Subject: Characterization
An Investigation on The Effect of Adherent Thickness on Failure Loads in an Adhesive Joint
Akhavan Safar, A., Ayatollahi, M. R.
University of Science and Technology
Experimental and Numerical Evaluation of Composite-Metal Adhesive Bonded Joints and Study on Effective
Parameters
Sadeqzadeh Naeini, E., Farahani, M.R., Karami, P.
University of Tehran
Experimental and Numerical Investigation of a Three Point Bending Test on Sandwich Panel with CFRP Skins and
Aluminum Honeycomb Core
Shambooli, M., Shakeri, M., Khalili, M.R., Akbari Alashti, R.
Babol Noshirvani University of Technology
Experimental Investigations on Reinforced Concrete Slabs Strengthened by GFRP Sheets
Khaloo, A. R., Asnaashary Esfahani, M.
Sharif University of Technology
VII
Room 2 (December 17, 2014)
Session Chairs: Hosseini-Toudeshky, H. and Mohammadi, B.
13:30-13:50
A-10-1126-1
13:50:14:10
A-10-1276-1
14:10-14:30
A-10-1056-1
14:30-14:50
A-10-1277-1
Subject: Fracture
Effects of Fiber-Matrix Deboning Matrix Cracking on Mechanical Properties of Composite Laminates Using
Micromechanical Approach
Hosseini-Toudeshky, H., Mohammadi, E., Mohammadi, B.
Amirkabir University of Technology
Investigation of Fatigue Behavior of Polymeric Composites Manufactured by Hand Lay-Up and Vacuum Infusion
Process (VIP)
Toghraee, M., Zabett, A., Javadpour, S.
Ferdowsi University of Mashhad
Fracture Toughness Measurement of Curved Fiber Reinforced Composites; Experimental Approach
Khoshravan, M.R., Forghani, M.
University of Tabriz
Numerical Investigation of Fracture Behavior of Beetle Elytra
Rajabi, H., Monsef, M., Darvizeh, A., Shafiei, A.
Ahrar Institute of Technology and Higher Education
Room 3 (December 17, 2014)
Session Chairs: Tehrani, M. and Khalili, S.M.R.
13:30-13:50
A-10-1129-1
13:50:14:10
A-10-1099-3
Subject: Nanomaterials
Hybrid Composites Utilizing Surface Grown Carbon Nanotubes
Tehrani, M., Boroujeni, A.Y., Al-Haik, M.S.
University of New Mexico
A Novel Micromechanical Constitutive Model to Predict the Shear Behavior of Neat and Nano-Phased Epoxy under
Dynamic Loadings
Shokrieh M. M., Shamaei, A. R., Mosalmani, R.
Iran University of Science and Technology
VIII
14:10-14:30
A-10-1053-1
14:30-14:50
A-10-1356-2
Mechanical Properties Development of Nitrile-Butadiene Rubber/Organoclay Nanocomposites by Hydrogen Bonds
Intercalation Method
Paran, S.M.R., Naderi, G., Ghoreishy, M.H.R.
Iran Polymer and Petrochemical Institute
Non-isothermal Melting Behavior of UHMWPE/SCF/SiO2 Composites
Khavandi, A., Sattari, M., Alizadeh, O.
Iran University of Science and Technology
Room 4 (December 17, 2014)
Session Chairs: Foroutan M. and Taheri-Behrooz, F
13:30-13:50
A-10-1110-1
13:50:14:10
A-10-1094-1
14:10-14:30
A-10-1097-1
14:30-14:50
A-10-1291-2
Subject: Analysis and Safety
Coupled Flexural-Torsional Vibration Of Laminated Composite Beams Subjected to Axial Force and End Moment – a
Layerwise Discretization
Towliat-Kashani, M-T, Hashemi, S.M.
Ryerson University
Dynamic Analysis of Functionally Graded Material (FGM) Thick-Walled Spheres under Mechanical and Thermal
Shocks by a Mesh-Free Method
Foroutan M., Varvani-Farahani A.
Razi University
Nonlocal DQM for Nonlinear Vibration of Functionally Graded SWCNTs Reinforced Piezoelectric Plates
Ghorbanpour Arani, A., Kolahchi, R., Mosayyebi, M., Jamali, M.
University of Kashan
Bending of a Composite Sandwich Sector Plate with Viscoelastic Core Using Dynamic Relaxation Method
Salehi, M., Marashizadeh, P., Abshirini, M.
Amirkabir University of Technology
Coffee/Tea Break
Room 1 (December 17, 2014)
Session Chairs: Ayatollahi, M. R. and Khoramishad, H.
15:30-15:50
A-10-1074-1
Subject: Characterization
Identification of the Dynamic Characteristics of an Epoxy-Glass Composite Plate
Naraghi, T., Nobari, A.
AmirKabir University of Technology
IX
15:50:16:10
A-10-1252-2
16:10-16:30
A-10-1263-1
16:30-16:50
A-10-1173-2
Material Characteristics Investigation of Composite Porous Beam with Axial Diffusion Using FDM and Taguchi DOE
Rezaei, S.D., Rezaeepazhand, J.
Ferdowsi University of Mashhad, Mashhad
Nonlinear Optical Monitoring of Polyurethane via Cordierite Glass Ceramic doping by Z-Scan Technique
Nadafan, M., Malekfar R., Dehghani, Z.
Tarbiat Modares University
Study The Influence of Antimony Trioxide on Flammability and Mechanical Properties of Polypropylene Filled with
Chloroparaffin
Aslani, A., Ghasemi A., Bagheri, R.
Sharif University of Technology
Room 2 (December 17, 2014)
Session Chairs: Sadighi, M. and Heidari-Rarani, M.
15:30-15:50
A-10-1093-2
15:50:16:10
A-10-1248-1
16:10-16:30
A-10-1293-2
16:30-16:50
A-10-1213-1
Subject: Application
Impact Behavior of Kevlar/Carbon Hybrid Fiber-Metal Laminates
Eslami-Farsani, R., Jalali, H., Mirzaee Sisan, M.
K. N. Toosi University of Technology
The Effect of Glass-fiber Surface Modification (Coupling agent/Corona) on Response of Composite Structures
towards High-Velocity Impact
Moallemzadeh, A. R., Sabet, S. A. R., Abedini, H., Zaji, M.
Iran Polymer and Petrochemical Institute
Low-Velocity Impact Response and Damage in Composite Grid-Stiffened Cylindrical Shells
Gerami, A., Davar, A., Jam, J. E., Zamani. M.R.
Malek Ashtar University of Technology
Behavior of Concrete Beams Reinforced in Shear with Carbon Fiber Reinforced Polymer
Amjad H Abdul-Razaq Al-Modhafer
University of Kufa
Room 3 (December 17, 2014)
Session Chairs: Salehi, M. and Mosalmani, R.
15:30-15:50
A-10-1287-1
Subject: Nanomaterials
Experimental Study on the Mechanical Behavior of PBT/ABS/CaCO3 Nanocomposites
Norouzi, A., Shelesh-Nezhad, K., Adli, A. R., Baraheni, M., Miralami, A.
University of Tabriz
X
15:50:16:10
A-10-1235-1
16:10-16:30
A-10-1356-1
16:30-16:50
A-10-1209-1
Study of Moisture Diffusion and Cure behavior of Vinyl Ester Resin/Organoclay Nanocomposites
Jowdar, E., Beheshty, M.H., Bagherzaheh, E., Jowdar, M., Jowdar, M., Mirzadeh, S.
Office of Standard and Industrial Research
Effects of the Copolymer Structure on the Properties of Polypropylene/Ethylene-Octene Copolymer/Clay
Nanocomposites
Bagheri-Kazemabad, S., Khavandi, A., Chen, B.
Iran University of Science and Technology
Effect of Nano Diamonds on Cure Characteristics and Network Structure of NR/SBR Vulcanizates
Rabiei, S., Shojaei, A.
Sharif University of Technology
Room 4 (December 17, 2014)
Session Chairs: Aghdam, M. M. and Sharifpur, M.
Subject: Analysis and Safety
CFD Simulation to Find Porous Multilayer Limitation of the Vacuum Infusion Process
15:30-15:50 A-10-1350-2 Sharifpur, M., Mahdavi, M., Meyer, J.P.
University of Pretoria
Mechanical Properties of Natural Fibers Reinforced Polymer: Comparative Study
15:50:16:10 A-10-1351-1 Hallal A., Hammoud M., Jibaii S., Hariri A., Salameh W., Alshaer A. and Hussein B.
Lebanese International University
Finite Element Simulation of Damage Initiation and Propagation in SiC/Ti Composites Subjected to Combined
Thermo-mechanical Loadings
16:10-16:30 A-10-1190-1
Morsali, S. R., Hosseini, S. M. A., Aghdam, M. M.
Amirkabir University of Technology
Mechanical Properties of Tri-axially Braided Composites: A Parametric Study
16:30-16:50 A-10-1351-2 Hallal A., Hammoud M., Ismail M., Ismail A., Salameh W. and Alshaer, A.
Lebanese International University
Room 5 (December 17, 2014)
Session Chairs: Taheri-Behrooz, F. and Safizadeh, M.S.
Subject: Design and Analysis
Pulsed Thermography Method for Delamination Detection of Glass Fiber Composites
15:30-15:50 A-10-1305-1 Ghadermarzi, K., Safizadeh, M.S., Taheri-Behrooz, F.
Iran University of Science and Technology
XI
15:50:16:10
A-10-1278-1
16:10-16:30
A-10-1274-1
16:30-16:50
A-10-1218-1
Interface Characterization of Al/Cu/Al Tri-layer Composites after Explosive Cladding and Rolling Process
Hosseini Athar, M.M., Tolaminejad, B.
University of Kashan
Determination of Pressure Distribution on Composite Trimarans During Water Entry
Nikfarjam, M., Yaakob, O. B., Seif, M.S., Koto, J., Aref, A.
Sharif University of Technology
The Effect of Using Composite Materials and Sandwich Structures in Car Body on Pedestrian Safety in Urban Traffic
Torkestani, A., Sadighi, M., Hedayati, R., Saber, H.
Amirkabir University of Technology
Poster Presentations (Dec. 16, 2014 10:30-12:00)
A-10-1046-1
A-10-1048-1
A-10-1050-1
A-10-1055-1
A-10-1057-1
A-10-1058-1
Impact of Cement Type on the Mechanical Behavior of Fiber Treated Sand
Nikzad, N., Hamidi, A.
Kharazmi University
Effect of Fiber Reinforcement on Triaxial Shear Behavior of Clayey Sand
Moradi, M., Hamidi, A.
Kharazmi University
Evaluation of Modulus of Elasticity in Polymer-Based Functional Graded Materials Reinforced with Carbon Nano Tubes
Moharerzadeh Kurd, S., Hasanifard, S.
University of Tabriz
An Experimental and Computational Investigation of Mixed-Mode Translaminar Fracture of Woven Glass/Epoxy Composite
Khaliji, V., Shameli, M., Choupani, N., Yazdani, M.
Sahand University of Technology
Characterization of Fiber Reinforced Composite Materials Properties Using Micromechanical Method
Moslemi, M. and Khoshravan, M.R.
University of Tabriz
Verification of Some Models for Simulating a Coated Fabric as an Anisotropic Hyperelastic Continuum Media with Experimental
Data
Kamal, A., Shahidi A.R., Salehi, H.
Isfahan University of Technology
XII
A-10-1059-1
A-10-1061-1
A-10-1063-1
A-10-1066-1
A-10-1070-2
A-10-1072-1
A-10-1072-2
A-10-1073-1
A-10-1076-1
A-10-1081-1
Influence of FRP Width on Bond Strength of FRP-to-Concrete
Mostofinejad, D., Arefian, B., Hosseini, A.
Isfahan University of Technology
Buckling Behavior of a New Type Sandwich Panel with Composite Skins and Trapezoidal Shape Corrugated Composite-Foam Core
Rahimi G.H., Mohammadi A.A., Rahmani R., Pourmoayed A.R.
Tarbiat Modares University
Local and Global Approaches to Fracture Mechanics Using Different Computational Geometry Technologies in Isogeometric
Analysis Method
Khademalrasoul, A., Naderi, R.
Shahrood University of Technology
Nonlinear Mechanical Response of Carbon Nanotube/Rubber Composites Subject to Various Types of Loadings
Ghaderi, S. H., Jafari, M., Mohseni, S. N.
Shahrood University of Technology
Finite Element Simulation of Thermal Deformation in Bi-Stable Cylindrical Composite Shells for Morphing Applications
Mostafavi S., Golzar M., Alibeigloo, A.
Tarbiat Modares University
Experimental Study of Repeated Loading on Elastomeric Foam Cores
Zarei Mahmoudabadi , M., Taherkhani, A., Sadighi, M.
Amirkabir University of Technology
Investigation on Sandwich Plates with Discontinuous Flexural Cores
Taherkhani A., Zarei Mahmoudabadi M., Sadighi, M.
Amirkabir University of Technology
Multiscale Matrix Cracking and Delamination Damage Analyses in Quasi-Isotropic Glass/Epoxy Composite Laminates with Hole
Sadeghi, G., Hosseini-Toudeshky, H.
Iran Aircraft Manufacturing Industries Co.
Finite Element Analysis of Unidirectional Fibrous Polymer Composites by Considering Interfacial Debonding
Shokrian, M.D., Shelesh-Nezhad, K., Zamani-Zakari, A.
University of Tabriz
Surface Characteristics of Magnetic Nanocomposite Reverse Osmosis Membrane
Tayefeh, A., Poursalehi, R., Mousavi, A.
Tarbiat Modares University
XIII
A-10-1085-1
A-10-1086-1
A-10-1089-1
A-10-1092-1
A-10-1093-1
A-10-1095-1
A-10-1098-1
A-10-1098-2
A-10-1098-3
A-10-1099-1
Most Common Non-Destructive Techniques for Damage Identification in Composite Structures: a Review
Amiri, M., Tabatabaee Ghomi, M.
Center of Excellence in Measurement
Cyclic Behavior of Thick Walled FGM Cylinder Based on Nonlinear Kinematic Hardening Models
Asgari, M., Khanmohammadi, A., Parsa, M.
K. N. Toosi University of Technology
Optical, Structural and Surface Properties of Magnetite/Polycarbonate Nanocomposite
Iranpour Anaraki, N., Poursalehi, R.
Tarbiat Modares University
Progressive Delamination Analysis of Composite Laminates under Repeated out of Plane Impact Loading
Hosseini-Toudeshky, H., Roshanfar, B., Salehi, M.
Amirkabir University of Technology
Microstructural Characteristics and Mechanical Properties of A356-Sicp Composites Fabricated by Mechanical Stirring Process;
Effect of Stirring Temperature
Eslami-Farsani R., Khosravi H.
K. N. Toosi University of Technology
A Study on Fabrication and Characterization of Polyvinyl Alcohol-Hydroxyapatite Composite Scaffolds
Ashraf A.A., Zebarjad S.M., Hadianfard M.J.
University of Shiraz
Evaluating the Effect of Ceramic Coating on Temperature Gradient of Engine Pistons
Namjoo, M., Golbakhshi, H., Mehni, I.
University of Jiroft
A Novel and Efficient Scheme for Evaluating Complex Integrals of Meshless Methods
Golbakhshi, H., Namjoo, M., Mehni, I.
University of Jiroft
An Improved Robust Mesh Free Method for Analyzing the Vibrating Behavior in Solid Mechanics
Golbakhshi, H., Namjoo, M., Mehni, I.
University of Jiroft
Flexural Fatigue Model for Carbon Nanofiber/Chopped Strand Mat/Epoxy Nanocomposites
Shokrieh, M. M., Haghighatkhah, A. R., Esmkhani, M.
Iran University of Science and Technology
XIV
A-10-1099-4
A-10-1099-5
A-10-1101-1
A-10-1103-2
A-10-1105-1
A-10-1108-2
A-10-1117-1
A-10-1117-2
A-10-1120-1
A-10-1121-1
A-10-1123-1
The Effect of Sea Water Aging on Quasi-Static and Fatigue Behaviors of Glass/Epoxy Composites
Shokrieh, M. M., Olia, H., Haghighatkhah, A. R., Esmkhani, M.
Iran University of Science and Technology
Progressive Damage Modeling of Open-Hole Laminated Composites
Shokrieh, M.M., Ghajar M., Madoliat, R.
Iran University of Science and Technology
Influence of Tio2 Nano Particles on the Tensile Properties of Dental Composite Included Bis-GMA
Kamali A., Zebarjad S.M., Ashraf A.A.
University of Shiraz
Pultrusion of Kenaf Fiber Impregnated by Starch And HDPE
Hedayati H., Golzar M., Ghorbani H.
University of Tarbiat modares
Poisson Effect on the Response of Smart Composite Beams
Nazarzadeh Ansaroudi, M., Rezazadeh Movahhed, S., Biglari, H.
University of Tabriz
Dispersion and Distributions of Organoclay in (Acryloitrile-Butadiene Rubber/Polyacrylate/Organoclay) Nanocomposite
Hasanpour N., Jalali-Arani A.
Amirkabir University of Technology
Finite Element Simulation of Randomly Oriented Discontinuous Fiber Composite Rotor Blade with Variable Thickness
Pourghasem, M., Bagheri, M., Golparvar, H.
Qadr Aerodynamic Research Center
Sensitivity Static Analysis of Unidirectionally Aligned Carbon/Epoxy Discontinuous Fiber Composites Rotor
Pourghasem, M., Bagheri, M., Golparvar, H.
Qadr Aerodynamic Research Center
Numerical Analysis for Modeling the Variability in Mechanical Behavior of Discontinuous Composite Materials
Ebrahimi, A., Pourghasem, M., Golparvar, H., Bagheri, M.
Qadr Aerodynamic Research Center
Factors Affecting the Damping of Composite/Honeycomb Sandwich Panels
Abbaslou, A., Maheri, M.R.
University of Kerman
An Image Processing Technique to Quantify Nanofiller Loading Accuracy in Nanocomposites
Khanlari, S., Gheibi, A., Dubé, M. A.
University of Ottawa
XV
A-10-1124-1
A-10-1125-1
A-10-1127-1
A-10-1128-1
A-10-1134-1
A-10-1136-1
A-10-1138-1
A-10-1139-1
A-10-1139-2
A-10-1151-1
Elastic Properties of Single Walled Carbon Nanotube Bundle/Polymer Composites
Ghaderi, S.H.
Shahrood University
Synthesis of Hybrid Aluminum/Zirconia Nanoparticles Alumina Microparticles by Semi-Solid Method
Yousefi, E., Roudini, G.
University of Sistan and Baluchestan
Investigation of Mixed-Mode Interlaminar Fracture of Woven Glass Epoxy Composite
Shameli, M., Choupani, N.
Islamic Azad University
Analytical Solution for Functionally Graded Plate on Elastic Foundation Using Mindlin and Kirchhoff Model Based on a Modified
Couple Stress Theory
Ghorbanpourarani, A., Ghaedi M.S.
University of Kashan
Synthesis and Characterization of Magnetic Nanocomposite Mnfe2o4/Graphene Oxide and Its Application in Determination of
Pb(II) in Real Sample
Karami, T., Bahar, S.
University of Kurdistan
Optical Properties of Silver-Copper Alloy Nanoparticles/Polystyrene Nanocomposite
Hashemian Rahaghi, S. H., Poursalehi, R., Miresmaeli R, Iranpour Anaraki, N.
Tarbiat Modares University
Synthesis of AA356.0/(B4C@Ni) Composite Reinforced by B4C@Ni Nano-Scale Layer Using Stir Casting
Ebrahimi, M. H., Malekan, M., Alizadeh, A., Balalestan, K.
Iran University of Industries and Mines
Vibrational Analysis of Curved Sandwich Panel with Magneto-Rheological Core Using Improved High Order Sandwich Panel
Theory
Rezaei Hasanabadi, M., Malekzadeh Fard, K.
Malek Ashtar University of Technology
Optimization of Curved Sandwich Panel with Magneto-Rheological Core Using Genetic Algorithm
Rezaei Hasanabadi, M., Malekzadeh Fard, K.
Malek Ashtar University of Technology
Effect of Functionalized Graphene Oxide on the Properties of Epoxy/Carbon Fiber Nanocomposites
Bahrami, R., Rahmani, H., Ashori, A.
Iranian Research Organization for Science and Technology
XVI
A-10-1152-1
A-10-1153-1
A-10-1157-1
A-10-1159-1
A-10-1160-1
A-10-1162-1
A-10-1163-1
A-10-1167-1
A-10-1167-2
A-10-1168-1
Non-Linear Study of Base Shear and Moment of Composite Columns in MRFs
Tavassoli, M.R., Khosravi Amiri, A.P., Mohammad Zamani, A.
Ialamic Azad University Roudehen
Synthesis and Characterization of Alkali Treated Wheat Straw/Fe3O4 Nanocomposite and its Application for Basic Blue 9
Adsorption
Ebrahimian Pirbazari, A., Saberikhah, E., Habibzadeh Kozani, S.S.
University of Tehran
Mechanical and Physical Properties of Chitosan/ Poly (Vinyl Alcohol) Nanocomposite Films Reinforced with Montmorillonite
Shakeri, A., Kouklani H.
University of Tehran
Analytical Investigation of Rectangular FGM Plate under Thermostatic Loads Based on First and Higher Order Shear Deformation
Theories
Nejatpour, M., Biglari, H.
University of Tabriz
Chemical Modification of Carbon Fiber to Improve Its Performance in Carbon Fiber/ Epoxy Composites
Varnaseri, N., Rahmani, H., Ashori, A.
Iranian Research Organization for Science and Technology
Fabrication and Characterization of Vertically Aligned Carbon-Nanotube and Alumina Nanocomposite
Gilani, N.
University of Tehran
Experimental Study of the Mechanical and Vibrational Behaviors of Glass-Reinforced Aluminum Laminates
Fotouhi, M., Poursoleimani, H., Fotouhi, S.
Amirkabir University of Technology
Crashworthiness of Laterally Compressed Composite Tubes Between V-Shape Dies and V-Shape Indenters
Niknejad, A., Amirhosseini, Gh., Shahidi, J.
Yasouj University
Influences of Discontinuity on Lateral and Axial Compression Progress of Circular Composite Open and Closed-Sections
Amirhosseini, Gh., Shahidi, J., Niknejad, A.
Yasouj University
On The Role of Matrix Microstructure on Al/SiC Nanocomposites
Mosleh-Shirazi, S., Akhlaghi, F.
University of Tehran
XVII
A-10-1168-3
A-10-1169-1
A-10-1170-1
A-10-1171-1
A-10-1172-3
A-10-1173-1
A-10-1182-1
Effect of Sintering Time on the Microstructure and Properties of Al-Al2Cu Composites Produced by Powder Metallurgy
Hoseini-Gurajubi S.F., Akhlaghi F.
University of Tehran
Selection of Joint Design for a Modular Wind Turbine Blade
Tusavul, S., Fragoudakis, R., Saigal, A., Smith, K., Zimmerman, M. A.
Tufts University
Synthesis of Polyanilin Nanocomposite by HPC as a Surfactant and the Effect of Mgo on the Characteristics of Polymer
Aliaskari, F., Eisazadeh, H.
Shomal University
Determination of J-Integral and Crack Mouth Opening Displacement Using the Commercial FE Software ABAQUS in Acrylonitrile
Butadiene Styrene (ABS) Polymeric Material
Khamneh, M. S., Choupani, N., Oskui, A. E.
Sahand University of Technology
Applying Self-Healing Coatings to the Ceramic Base Titania-Benzotriazole on 7075 Aluminum Surface by Sol-Gel Method
Kadkhodaei, M., Shanaghi, A., Moradi, H.
Iran of Malayer University
Study on Physical and Mechanical Properties of Bagasse Fiber/Thermoplastic Starch Biocomposite
Ghasemi, A., Amiri M., Aslani A., Bagheri, R.
Sharif University of Technology
Synthesis of Polythiophene/Poly(Vinyl Chloride) Composite and Nanocomposite by Using PVP And PVA as Surfactants in Aqueose
Media and Investigation the Characteristics of Products Such as Morphology and Chemical Structure
Avazzadeh, S., Eisazadeh, H.
Chemical Engineering Department of Shomal University
Poster Presentations (Dec. 17, 2014 10:30-12:00)
A-10-1185-1
A-10-1188-1
Tribological and Corrosion Behavior of (Ti,Al)CN/DLC Coating
Zahiri, L., Saeri, M. R., Alirezaee, Sh., Afkhami, A.
Shahrekord University
Effect of Microsphere Content on Thermal Diffusivity Behavior of Hollow PMMA Microspheres/Unsaturated Polyester Syntactic
Foams
Farmany.A, Esfandeh. M, Mirabedini S.M.
Iran Polymer & Petrochemical Institute
XVIII
A-10-1188-2
A-10-1191-1
A-10-1191-2
A-10-1192-1
A-10-1193-1
A-10-1197-1
Effect of Clay Nanoparticles’ Addition on Hardness and Thermal Behavior of Hollow PMMA Microspheres/Unsaturated Polyester
Syntactic Foam
Farmany.A, Esfandeh.M, Mirabedini S.M.
Iran Polymer & Petrochemical Institute
Facile Photochemical Growth of Metallic Nanoparticles for Automobile Exhaust Catalysis
Samadpour, M., Esfandiar A.
K. N. Toosi University of Technology
Pt /Graphene Decorated on Nickel Foams as a Catalyst for Carbon Monoxide Degradation
Esfandiar, A., Samadpour, S.
Kharazmi University
Preparation and Characterization of Polyaniline/Polystyrene Composite and Nanocomposites Using Various Surfactants in Aqueous
Media
Eisazadeh, H., Abdollahzadeh, A.
Shomal University
Nonlinear Vibration of Composite Beams under Combined in-Plane and Lateral Loadings using Partial Layerwise Theory
Latifi, M., Kharazi, M., Ovesy, H.R.
Sahand University of Technology
Experimental Investigation into the Effects of Changing the Various Curve Radiuses of Composite Laminar & Angle Between Tool
Axis and Normal Vector of the Surface on Induced Delamination in Drilling Woven-GFRP
Alinaghizadeh, A., Peymoun, M., Sadoughi Rad, A.
Semnan Branch, Islamic Azad University
A-10-1197-2
Experimental Investigation into the Effects of Changing the Various Curves of Step Drill Cutting Edges & Cutting Parameter on
Induced Delamination in Drilling Woven-GFRP
Alinaghizadeh, A., Norouzi, B., Zahedkhah, M.
A-10-1198-2
Numerical Study of Single Point Incremental Bimetal Sheet Forming
Nouri, Z., Hashemi, R.
A-10-1201-1
Simulation of Fatigue Behavior of Nickel Plated Copper Composites Using Molecular Dynamics
Alizadeh, O., Shirazian, F.
Semnan Branch, Islamic Azad University
Iran University of Science and Technology
Tehran University
XIX
A-10-1202-1
Flexural Properties of Green Composites Made of Latania Natural Fiber and PP/EPDM Composites
Nasihatgozar, M., Daghigh, V., Nikbin K.
Islamic Azad University, Kashan Branch
A-10-1203-1
Active Control of Dynamic Response of Smart Sandwich Beam with Soft Core
Nadirian, N., Dadgar Pakdel, A., Biglari, H., Hamed, M.A.
A-10-1204-1
Low Velocity Impact Behavior of Hybrid Composites
Behnia, S., Shademan A., Nikbin K., Ghorbani J., Salmani R., Naderli R.
University of Tabriz
Islamic Azad University, Kashan Branch
A-10-1211-1
Experimental Studies on the Tensile and Impact Performances of PA6/ABS/Caco3 Nanocomposites
Baraheni, M., Shelesh-Nezhad, K., Adli, A .R., Norouzi, A., Miralami, A.
University of Kashan
A-10-1219-1
Effect of Graphene Nanoplatelets on the Mechanical Properties, Crystallization and Dynamic Mechanical Behavior of Poly
(ethylene-g-maleic anhydride)
Hakim, S., Razavi-Nouri, M., Jafari, B.
Iran polymer and petrochemical institute
A-10-1220-1
Analytical Estimation of Low Velocity Impact Force History on Composite Laminates Using Different Models
Halimi, S., Biglari, H.
University of Tabriz
A-10-1224-1
Using Liquid Homogenization in Order to Produce Al-Gr Composite with SPS and Cold Pressed-Sintered in Furnace and
Investigation of Microstructure
Pakdell Noghabi, H., Babakhani, A., Sajjadi, S.A.
Ferdowsi University of Mashhad
A-10-1224-2
Mechanical Properties of Al-Gr Composite Produced by Two Ways: SPS and Cold Pressed and Sintered in Furnace
Pakdell Noghabi, H., Sajjadi, S.A., Babakhani, A.
Ferdowsi University of Mashhad
A-10-1224-3
Wear Properties of the Al-Gr Composite Homogenized in the Liquid Produced by Two Methods: SPS and Cold Pressed and
Sintered in Furnace
Pakdell Noghabi, H., Babakhani, A., Sajjadi, S.A.
Ferdowsi University of Mashhad
XX
A-10-1224-4
Fracture Surface Study of the Al-Gr Composite Homogenized in the Liquid Produced by SPS
Pakdell Noghabi, H., Sajjadi, S.A., Babakhani, A.
A-10-1230-1
Tensile Properties of Epoxy Composite Reinforced with a Low Fraction of Nanosilica Fillers
Movahhedi Aleni, H., Liaghat, G.H., Pol, M.H., Afrouzian, A.
A-10-1233-1
Preparation and Biological Evaluation of Glass Ionomer Cement-Diopside Nanocomposite
Rezazadeh, M., Saeri, M.R., Doostmohammdi, A., Tirgir, F., Khaghani, M.
Ferdowsi University of Mashhad
University of Tarbiat Modares
University of Shahrekord
A-10-1234-1
Inertia Effects of Moving Load on Dynamic Response of Sandwich Beam with Soft Core
Dadgar Pakdel, A., Nadirian, N., Biglari, H., Etefagh, M.
University of Tabriz
A-10-1236-1
Application of Ultrasonic C-Scan Techniques for Nondestructive Testing Laminated Composite Materials
Moghanizadeh, A., Bahrami, M., Arin, N.
Shirvan Branch, Islamic Azad University
A-10-1238-1
Evaluation on Tensile Strength of Composite Materials Containing Palm Fiber as Reinforcing Materials
Hasani, H., Shahriyari, B.
Amirkabir University of Technology
A-10-1241-3
Anticorrosion Properties of Nanocomposite Coatings Based on Polysulfon-Epoxy Belend/Graphene
Razavi, B., Ramezanian, N., Ahmadjo, S.
University of Ferdowsi
Investigation on Tensile Properties of Glass/Epoxy/Nanosilica Hybrid Nanocomposites
A-10-1242-1
A-10-1245-1
Mehrabani, E., Liaghat, G.H., Pol, M.H., Movahhedi Aleni, H.
University of Tarbiat Modares
Failure Behavior of Inserts in Sandwich Panels under Pull-Out Loading
Khalili, S.M.R., Fatehi, H.
K.N. Toosi University of Technology
A-10-1245-2
Fabrication Procedure and buckling Behavior of Composite Lattice Cylindrical Shells under Axial Loading
S.M.R. Khalili, Farahbakhsh, H., Mir Mohammad Hossein Ahari, M., Zamani, M.
K.N Toosi University of Technology
XXI
A-10-1245-4
Thermal Cycling and Environmental Effect on Tensile Impact Behavior of Hybrid Single Lap Joints for Fiber Metal Laminate
Khalili, S.M.R., Sharafi, M., Eslami Farsani, R.
K.N. Toosi University of Technology
A-10-1245-5
A-10-1245-6
Numerical Analysis and Manufacture of a Simple Carbon Leg Prostheses for Runner
Khalili, S. M. R., Noruzian, H.
K.N. Toosi University of Technology
Sandwich Panel Fabrication with Auxetic Foam Core Made of Polyurethane and Glass Fiber Composite Facesheet
Khalili, S.M.R., Moharrami, S.
K.N. Toosi University of Technology
A-10-1245-7
Experimental Evaluation of Tensile Impact Properties of Reinforced Adhesively Scarf Joints for Composite Adherends
Khalili, S.M.R., Kachouie, M., Sadigh, N.
A-10-1245-8
Mechanical Properties of Hybrid Nanocomposite of Polycarbonate Reinforced by Sio2/AL2O3
Davaei Markazi, H., Eslami-Farsani, R., Khalili, S.M.R.
A-10-1247-1
Nonlinear Panel Flutter Analysis of FG Plates with Cutout in Supersonic Flow
Shahverdi, H., Amoozgar, M.R., Soleimani, H.
A-10-1251-1
Free Vibration Analysis of Rotating Composite Beam Using Dimensional Reduction Method
Ghafari, E., Rezaeepazhand, J.
A-10-1252-1
Quasi-Static Analysis of Composite Beam with Saturated Porous Core by Dimensional Reduction Method
Rezaei, S.D., Ghafari, E., Rezaeepazhand, J.
A-10-1254-1
Studying the Factors Which Affect on the Chemical Structures-Morohology and Thermal Stability of Polythiophene and Composites
Montazeri, M., Eisazadeh, H., Rostami, A.
A-10-1254-2
Studying the Factors Which Affect on the Chemical Structures, Morohology and Thermal Stability of Poly Pyrrole and Composites
Montazeri, M., Rostami, A., Eisazadeh, H.
K.N. Toosi University of Technology
K.N. Toosi University of Technology
Amirkabir University of Technology
Ferdowsi University of Mashhad
Ferdowsi University of Mashhad
University of Shomal
University of Shomal
XXII
A-10-1255-1
Multi-objective Optimization of Laminated Plates under a Non-Uniform In-Plane Load for Maximize Buckling Load
Nazarimofrad, E., Jahanpour, A.
A-10-1255-2
Multi-objective Optimization of RC Beams Strengthened in Shear with FRP
Nazarimofrad, E., Jahanpour, A.
A-10-1256-1
A study on Nanocomposite Beam Response under Low-Velocity Impact Based on an Analytical Model
Heydari Meybodi, M., Saber-Samandari, S., Sadighi, M.
University of Malayer
University of Malayer
Amirkabir University of Technology
A-10-1256-2
3D Finite Element Modeling of Young’s Modulus of Nanoclay/Polymer Composites
Heydari Meybodi, M., Saber-Samandari, S., Sadighi M.
Amirkabir University of Technology
A-10-1258-1
Composite Coatings Self-cleaning TiO2- SiO2- Ag
Nonahal, H., Shanaghi, A., Moradi, H.
Malayer University
A-10-1264-1
Synthesis of Mesoporous Silica/Nylon Nanocomposite Fibers via Electrospinning
Kazemzad, M., Aghakhani, A., Kazemi, E.
Material and Energy Research Center
A-10-1265-1
The Effect of Volume Fractions on Hole Stress Concentration in Composite Lamina Subjected to Matrix Plasticity
Taghipour Birgani, P.
A-10-1268-1
Impact Response and Damage of Composite Sandwich Panels with Foam Filled Grid Stiffened Core
Faraji Shoa, J., Davar, A., Soroush, M.
A-10-1270-1
Three-dimensional Bending Analysis of Thick Functionally Graded Rectangular Plates
Rahmati, M., Shahali, P., Moradi, M.
A-10-1271-1
Effect of Composite Wrapping on the Stress Intensity Factors for Repaired Circumferentially Cracked Pipes
Zareei, A., Nabavi, S.M.
Ahvaz Branch, Islamic Azad University
Malek Ashtar University of Technology
Isfahan University of Technology
Malek Ashtar University of Technology
XXIII
A-10-1275-1
Simulation of Fatigue Crack Propagation in Insect Cuticle
Rajabi, H., Bazargan, P., Pourbabaei, A., Darvizeh, A., Shafiei, A., Eshghi, Sh.
Ahrar Institute of Technology and Higher Education
A-10-1279-1
The Effect of Hole Curvature on Stress Analysis of Unsymmetric Laminates with Triangular Hole
Jafari, M., Ashoori savadkoohi, H.
A-10-1284-1
Parametric Study on Buckling of Composite Cylinder Shells under Axial and Torsion Loading
Mehrabi, M., Shahramyar, M., Soroush, M.
A-10-1288-1
Investigation of Impregnation Pultrusion GL/PP Prepreg Composites
Ataee, B., Golzar, M., Ghorbani, H.
Shahrood University of Technology
Islamic Azad University, Parand Branch
University of Tarbiat Modares
A-10-1293-1
Finite Element Assessment of the Buckling of Composite Grid Stiffened Cylinders under Axial Compressive Force
Gerami, A., Davar, A., Jam, J. E., Zamani, M.R.
A-10-1297-2
A 3D Progressive Failure Analysis of Mechanically Fastened Joints Made of Woven Glass-Epoxy Composites
Taheri-Behrooz, F., Bakhshan, H.
Malek Ashtar University of Technology
Iran University of Science and Technology
A-10-1297-3
Transient Heat Conduction in Three-Dimensional Glass/Epoxy Composite Plate
Taheri-Behrooz, F., Khozeimeh, M.A.
A-10-1311-1
Influence of Polymeric Fibers on Engineered Cementitious Composites Behavior under Various Strain Rates
Akbary, M., Sharif, F., Etminani Esfahani, M.A.
A-10-1311-2
The Use of Polyethylene Terephthalate Nanofibers to Improve the Structure of Polymer Composite Membranes
Akbary, M., Akbary, N., Latifi, M.
Iran University of Science and Technology
University of Shahreza
Islamic Azad University of Shahreza Branch
A-10-1350-1
Nanofluid Composites: Preparation and Rheology behaviour for Vacuum Infusion Process
Sharifpur, M., Adio, S.A., Meyer, J.P.
University of Pretoria
XXIV
A-10-1354-1
Influence of LF O2 Plasma Treatment on Surface Properties of PC-Tio2 Nanocomposite Film
Jaleh, B., Mohammadtaheri, S., Azizian, S., Shahbazi, N.
Bu-Ali Sina University
A-10-1355-1
Cost Optimization Analysis of Composite Beam
Eskandari, H., Koroujdeh, T.
A-10-1356-3
Fabrication and in-vitro Evaluation of HA/UHMWPE Composite as a Bone Substitute
Khavandi, A. and Mirsalehi, S.A.
A-10-1357-1
Extended Finite Element Analysis of Fatigue Crack Growth for a Cracked Shell Repaired by Composite Patch
Zarrinzadeh, H., Kabir, M.Z. and Deylami, A.
Hakim Sabzevari University
Iran University of Science & Technology
AmirKabir University of Technology
XXV