1. No category

lumenbeam™
SPECIFICATION SHEET
XLARGE
DYNAMIC WHITE
Client:
Project name: Order #
Type:
Qty:
FEATURES AND BENEFITS
Physical :
• Low copper content high pressure die-cast aluminum housing
• Steel formed yoke (standard yoke included)
• Stainless steel hardware
• Silicone sealing devices
• Clear tempered glass
• Dual chamber design for heat management and ease of maintenance
• Electro-statically applied polyester powder coat finish
• 16.33 kg / 36 lbs
• EPA: Front = 2.75 sq. ft./ 0.26 sq. m. Side = 1.17 sq. ft./ 0.12 sq. m.
• IP66
• IK09 rated
• Corrosion-resistant option for marine environments
• Meets 3G ANSI C136.31 Vibration standard for bridge applications
Performance :
• • • • • • • • Dynamic Warm variable color temperature: 108 LEDs (12x 2200K, 12x 2700K, 12x 3000K per board)
Dynamic White variable color temperature: 108 LEDs (12x 2700K, 12x 4000K, 12x 6500K per board)
6,886 delivered lumens and 313,146 candelas at nadir (DWH full output, 6° optic, RO version)
6°, 10°, 20°, 40° or 60° optics available
Lumen maintenance 120,000 hrs [L70 @ 25°C]
Resolution per board or per fixture (see page 5)
Lumen measurements comply with LM - 79 - 08 standard
Operating temperatures: -25° C to 50° C [-13F to 122F]
IK09
Electrical :
• • • • • Line voltage luminaire for 100 to 277V
Power and data in 1 cable, 3ft/1 m cord (#16-5)
Regular Output version: 140 watts
High Output version: 205 watts
DMX 512 ready
5 3"
4
[146mm]
TOP VIEW
0°
1
17 2 "
[445mm]
68°
board #3
board #2
board #1
17 1"
4
[438mm]
90°
23 1"
8
[587mm]
160°
FRONT VIEW
5 year warranty
1/8
2014.12.18
NK - R8
Standard Yoke (as shown, included)
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
SIDE VIEW
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
Copyright © 2014 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice
and such modification shall be effective immediately.
Standard Yoke Mounting
Adjustable Pivot Limits
(Adjustable in 6 degree increments)
lumenbeam™
SPECIFICATION SHEET
XLARGE
DYNAMIC WHITE
MOUNTING OPTION
5 3"
4
[146mm]
17 1 "
2
[445mm]
0°
70°
18 3 "
4
[476mm]
110°
SY
Short Yoke Mounting
Short Yoke mounting
adjustable pivot limits
(Adjustable in 6 degree increments)
3"
[76mm]
1
"
2
[13mm]
5
"
8
[16mm]
Standard and Short Yoke mounting
holes Pattern
OPTICAL OPTIONS
*Factory installed
LSLH
Linear Spread Lens
Horizontal distribution
(not adjustable on site)
2/8
2014.12.18
NK - R8
LSLV
Linear Spread Lens
Vertical distribution
(not adjustable on site)
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
Factory installed, available for 6° to 40° optics.
See Optical Accessories for field adjustable spread lens.
*See photometric section for optical performance data
with the spread lens.
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
Copyright © 2014 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice
and such modification shall be effective immediately.
lumenbeam™
SPECIFICATION SHEET
XLARGE
DYNAMIC WHITE
ACCESSORIES
Order separately
Mounting Accessories
PM4-1, PM4.5-1, PM5-1
Round Pole Mounting accessory
single fixture
28 5 "
16
[719mm]
PM4-2, PM4.5-2, PM5-2
Round Pole Mounting accessory
twin fixtures
5 3 "
16
[132mm]
7 5 "
16
[185mm]
23"
16
[55mm]
When PM4-2, PM4.5-2 or PM5-2 are specified,
one bracket assembly is supplied per 2 fixtures unless
otherwise specified.
PM4 Round Pole Mounting Accessory Shown
*Consult factory for square pole section
5 7"
8
[149mm]
TN2
Tenon adapter
to fit on 2 3/8” O.D. tenon
4"
[102mm]
21
2"
[64mm]
5 7"
8
[149mm]
TN4
Tenon adapter
to fit on 4” O.D. tenon
3/8
2014.12.18
NK - R8
4"
[102mm]
41"
8
[105mm]
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
Copyright © 2014 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice
and such modification shall be effective immediately.
lumenbeam™
SPECIFICATION SHEET
XLARGE
DYNAMIC WHITE
ACCESSORIES - continued
Order separately
Optical Accessories:
LBX-SN-___-BK Snoot accessory. Please specify desired exterior finish :
*Interior surface SI - Silver SandText
painted black. BKM - Matte black
WH - White
CC - Custom, please specify RAL color
LBX-SNW-___-BK Snoot Wide accessory. Please specify desired exterior finish :
*Interior surface SI - Silver SandText
painted black. BKM - Matte black
WH - White
CC - Custom, please specify RAL color
LBX-VS-___-BK Visor accessory. Please specify desired exterior finish :
*Interior surface SI - Silver SandText
painted black. BKM - Matte black
WH - White
CC - Custom, please specify RAL color
LBX-WG-___ Wire Guard accessory. Please specify desired exterior finish :
SI - Silver SandText
BKM - Matte black
WH - White
CC - Custom, please specify RAL color
LBX-LSLA-___ Linear Spread Lens Adjustable accessory. Please specify desired exterior finish :
SI - Silver SandText
BKM - Matte black
WH - White
CC - Custom, please specify RAL color
Accessory combinations:
+
Snoot Snoot Wide Visor Wire Guard
Snoot
NO
NO
NO
YES
Visor
NO
NO
NO
YES
Linear Spread
Lens Adjustable
YES
YES
YES
NO
Accessory combinations must be ordered together on a single line.
Ex: A Snoot + Wire Guard combination order code is LBX-SNWG-BK-BK.
4/8
2014.12.18
NK - R8
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
Copyright © 2014 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice
and such modification shall be effective immediately.
lumenbeam™
SPECIFICATION SHEET
XLARGE
DYNAMIC WHITE
ACCESSORIES - continued
Order separately
Control Systems:
LTO2 Lumentouch is a wall mount DMX 512 controller keypad.
LCU Lumencue is a USB / mini SD DMX 512 controller.
LID LumenID is a diagnostic and addressing DMX 512 controller.
It must be specifi ed on all DMX applications.
Refer to LID specifi cation sheet for details.
LTN Lumentone is a simple pre-programmed DMX 512 controller
with a push button rotary dial and live feedback.
Control Boxes:
CBX DMX/RDM control box.
Up to six power and data outputs to fi xtures or fi xture runs.
Ethernet enabled option.
Refer to CBX specifi cation sheet for details.
5/8
2014.12.18
NK - R8
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
Copyright © 2014 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice
and such modification shall be effective immediately.
lumenbeam™
SPECIFICATION SHEET
XLARGE
DYNAMIC WHITE
RESOLUTION DETAILS
DMX 1BD - Resolution per board: each board is addressed independently
(recommended for most installations)
DMX ADDRESSES:
board #3
7,8,9
board #2
4,5,6
board #1 (master)
1,2,3
LBX
DMX 1FX - Resolution per fixture: each fixture is addressed independently
DMX ADDRESSES:
1,2,3
LBX
*Warning: resolution is a factory setting and cannot be changed in the field.
6/8
2014.12.18
NK - R8
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
Copyright © 2014 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice
and such modification shall be effective immediately.
lumenbeam™
SPECIFICATION SHEET
XLARGE
DYNAMIC WHITE
TYPICAL WIRING DIAGRAMS
Star Layout (DMX)
American
Color Code
CE
Color Code
USE
Green
Black
White
Red/Purple
Orange
Yellow/Green
Brown
Blue
Black
Grey
Ground
Live 100-277V
Neutral
0-10V / Data +
0-10V / Data -
#16-5 Power &
data cable
(by others)
CBX-ST
JBOX
100-277V
Data
input
lumenterminator
(use at the end
of each run only)
Lumentouch 2.0
DMX- orange
DMX+ red
From
fixture or
CBX
100-240V
To
Fixture
8 LBX RO (16 AWG cable) max. per CBX-ST,
6 LBX HO (16 AWG cable) max. per CBX-ST,
10’ on center spacing.
6 outputs max. per CBX-ST.
100‘ max. total cable length per CBX-ST.
(based on a 15A @ 120V)
Line black
Ground green
Neutral white
Wire-nuts
Junction box
(by others)
DMX terminator is required at the end
of each run to maintain data integrity.
(2x) DMX lumenterminator included per CBX-DS
(6x) DMX lumenterminator included per CBX-ST
See installation instructions for details.
Daisy Chain Layout (DMX)
CBX-DS
#16-5 Power &
data cable
(by others)
JBOX
100-277V
lumenterminator
(use at the end
of each run only)
Lumentouch 2.0
Data
input
DMX- orange
DMX+ red
From
fixture or
CBX
To
Fixture
Line black
Ground green
Neutral white
100-240V
Wire-nuts
Junction box
(by others)
7/8
2014.12.18
NK - R8
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
Copyright © 2014 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice
and such modification shall be effective immediately.
8 LBX RO (16 AWG cable) max. per CBX-DS,
6 LBX HO (16 AWG cable) max. per CBX-DS,
10’ on center spacing.
2 outputs max. per CBX-DS.
100‘ max. total cable length per CBX-DS.
(based on a 15A @ 120V)
lumenbeam™
SPECIFICATION SHEET
XLARGE
DYNAMIC WHITE
HOW TO ORDER
LBX Select:
Select:
Select:
Select:
Select:
Select:
Select:
Select:
Board 1/ Board 2/ Board 3
Housing
Voltage
Colors and
color
temperatures
Control
Optic
Optical
Option
Finish
Option
1
2
3
4
5
6
7
8
1
5
Housing:
Optic (Please specify for each board):
LBX RO - Lumenbeam XLarge, Regular Output, 140W
LBX HO - Lumenbeam™ XLarge, High Output, 205W
™
VN - Very Narrow 6°
2
NS - Narrow Spot 10°
Voltage:
100 - 100 volts
220 - 220 volts
120 - 120 volts
240 - 240 volts
208 - 208 volts
277 - 277 volts
NF - Narrow Flood 20°
FL - Flood 40°
3
WFL - Wide Flood 60°
Colors and Color temperatures:
(cannot be combined with other optics)
DWW - Dynamic warm white color temperature
ranging from 2200K to 3000K.
6
DWH - Dynamic white color temperature ranging
from 2700K to 6500K.
Optical Option:
LSLH - Linear Spread Lens Horizontal distribution
LSLV - Linear Spread Lens Vertical distribution
4
Control:
*Factory installed, available for 6° to 40° optics. See
Optical Accessories for field adjustable spread lens.
DMX 1BD - Resolution per board
7
DMX 1FX - Resolution per fixture Finish:
SI - Silver SandText
BK - Black SandText
WH - White
CC - Custom (please specify RAL color)
8
Option:
SY - Short Yoke
SY-3GV - Reinforced Short Yoke to meet 3G ANSI
C136.31 Vibration Rating standard
CRC - Corrosion-resistant Coating
8/8
2014.12.18
NK - R8
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
Copyright © 2014 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice
and such modification shall be effective immediately.